• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.05b
• /
• pp.171-174
• /
• 2009

The standard estimation system, used to estimate the predetermined cost of construction work, is measured by the standard and typical construction methods and field conditions. And the standard estimation system is applied to basic data for the measuring of construction cost, such as the consumed quantity of material, labor hours, and machinery cost. However it does not reflect sufficiently for the diversity and reality of constructions work Therefore, this study is recognized the necessity of new cost estimation models for the rational construction cost estimation. To improve estimation technique and construction ability, it was analyzed labor hours, production volume based on the work crew in construction work.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1999.07a
• /
• pp.83-88
• /
• 1999

인발식 마늘 수확기의 기본개념은 마늘줄기가 인발 가이드를 따라 마늘줄기 인발부로 안내되어 지면 상방향으로 인발, 이송되는 방식으로서 인력에 의한 마늘수확 메카니즘과 유사하다. 그러나 수확기가 전진함에 따라 마늘이 연속적으로 인발되어 인력작업에 비해 매우 높은 수확능률을 갖는다. 또한 굴취식 수확기와 비교하여 연료가 절감되고 통마늘의 손상이 적은 장점이 있다. (중략)

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.07a
• /
• pp.384-389
• /
• 2003

전기가 공급되지 않는 농경지에 물을 공급하기 위해 태양열을 동력원으로 하고 저온에서 비등하는 물질을 작동물질로 하는 물펌프가 연구되어 왔다. 이와 관련하여 김 등(2002, 2003)은 펜탄을 작동물질로 한 태양열 물펌프 연구에서 에너지변환실험, 작동사이클의 열역학적인 해석, 장치의 설계를 수행한 바 있다. 본 연구에서는 펜탄을 작동물질로 한 태양열 물펌프를 실현하기 위하여 기존의 설계를 바탕으로 실험장치를 제작, 실험, 분석하였다. (중략)

• Journal of Technology Innovation
• /
• v.9 no.2
• /
• pp.56-76
• /
• 2001

The main purpose of this study is to analyse the digital divide and th determinants of ICT diffusion rate in Korean industries. We estimate the ICT diffusion function using the pooling data for this analysis. The results are as follows. First, the ICT capital accumulated in machinery & equipment, electrical machinery and construction industry is estimated to be 83% of total In capital stock in the 90s. Second, using the panel analysis, we find positive correlation among ICT diffusion, network effect and accumulation of human capital, which is more prominent in the service sector. Third, the estimation results show that the additional 1% increase of human capital accumulation will allow to increase the 0.69% of ICT capital intensity in Korean industries.

• Journal of Drive and Control
• /
• v.18 no.1
• /
• pp.1-8
• /
• 2021

This paper presents research on methods for the reduction of forklifts' noise level for the increased comfort and safety of its operator. A cooling fan with a high air volume flow rate installed in the forklift acts as an important design parameter which efficiently cools the heat exchanger system, helping to transfer internal heat from the engine room to the outdoors with both transmitted and diffracted opening noises. The cooling fan contributes significantly to both the forklift's emitted sound power and the operator room's noise level, thereby necessitating research on the forklift's reduction of acoustic power level and transmission. A noise analysis for various fan models with a biomimetic design based on eagle-wing geometry was conducted. In addition to the acoustic power generation, the aerodynamic performance of the cooling blade is also strongly influenced by the design of airfoil distribution, thereby requiring optimization. The cooling fans were fabricated and installed in the forklift in order to check the efficacy of the forklift engine's cooling, and the final version of the fan was measured for its ability to lower acoustic power level and cool the engine room. This study explains the aerodynamic and acoustic features of the designed fans with the use of BEM analysis and forklift test results.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4D
• /
• pp.493-504
• /
• 2008

Considerable effort has been made to improve construction processes through mechanization and robotization of current work. In this paper, the trend of research and development related to the construction machinery automation to improve the construction productivity has been reviewed. A classification system is proposed for automation of architectural and civil works. Then, the priority among the classified construction tasks for automation has been identified through the questionnaire study. Based on the priority for automation a comprehensive technology road map was also developed. The technology road map suggests the time frame to complete R&D work for the selected construction tasks and the core technology required for automation of the selected tasks. Such automation R&D road map for construction machinery can be utilized as a milestone in setting up the R&D strategy in the construction industry.

• Particle and aerosol research
• /
• v.14 no.4
• /
• pp.121-133
• /
• 2018

In this study, we developed a flat-plate type wet electrostatic precipitator that generates stable corona discharge compared to wire type discharge electrode. In order to compare the particle removal efficiency according to the shape of the discharge electrode such as the variation of the horizontal and vertical distance between spiked edges, and the variation of the height of discharge pin support were tested. As a result, when the horizontal distance between spiked edges was increased up to 36 mm, the vertical distance between spiked edges was increased up to 54 mm, and the height of the discharge pin support was increased up to 76 mm, the removal efficiency of PM10 was maintained at approximate 60.0%. Furthermore, the removal efficiency of particles over $5{\mu}m$ was about 80% or more. When the flow rate was 4 m/s, the gap between collection plates was 60 mm, and -14 kV was applied to the discharge electrode. The particle removal efficiency of the flat-plate type electrostatic precipitator was maintained when the horizontal and vertical distance between spiked edges, and the height of the discharge pin support was below a certain level. Those variables may be the important design factors for the shape of the discharge electrode. Therefore, when designing the electrostatic precipitator with multiple channels, the horizontal and vertical distance between spiked edges, and the height of discharge pin support must be selected in consideration of the weight of the discharge electrode and the processing cost.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.113-116
• /
• 2005

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.385-386
• /
• 2013

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.381.1-381
• /
• 2002

The A lot of rotating machinery are generally used in industrial field and the electrical machinery such as the motor and generator account for the most of the part. Generally motor and generator have electrical loss because of eddy current. So silicon steel sheets are used in order to reduce the electrical loss and furthermore laminated rotor is used for motor and generator to eliminate the electrical loss and heat generation. (omitted)