• Nuclear Engineering and Technology
• /
• v.44 no.8
• /
• pp.831-846
• /
• 2012

KAERI has developed a two-phase CFD code, CUPID, for a refined calculation of transient two-phase flows related to nuclear reactor thermal hydraulics, and its numerical models have been verified in previous studies. In this paper, the CUPID code is validated against experiments on the downcomer boiling and moderator flow in a Calandria vessel. Physical models relevant to the validation are discussed. Thereafter, multi-scale thermal hydraulic analyses using the CUPID code are introduced. At first, a component-scale calculation for the passive condensate cooling tank (PCCT) of the PASCAL experiment is linked to the CFD-scale calculation for local boiling heat transfer outside the heat exchanger tube. Next, the Rossendorf coolant mixing (ROCOM) test is analyzed by using the CUPID code, which is implicitly coupled with a system-scale code, MARS.

• Journal of Sensor Science and Technology
• /
• v.25 no.5
• /
• pp.303-309
• /
• 2016

In this paper, we introduce a new method for controlling the illumination of LEDs in visible light communication (VLC) by changing the duty cycle of Manchester code. When VLC data were transmitted in Manchester code, the average optical power of the LEDs was proportional to the duty cycle. In experiments, we controlled the illumination of a $3{\times}3$ LED array from 10% to 90% of its peak value by changing the duty cycle of the Manchester code. The synchronizing clocks required for encoding and decoding the Manchester code were supplied by pulse generators that were connected to a 220 V power line. All pulse generators made the same pulses with a repetition frequency of 120 Hz, and they were synchronized with the full-wave rectified voltage of the power line. This scheme is a very simple and useful method for constructing indoor wireless sensor networks using LED light.

• Nuclear Engineering and Technology
• /
• v.42 no.5
• /
• pp.500-519
• /
• 2010

AEGIS is a lattice physics code incorporating the latest advances in lattice physics computation, innovative calculation models and efficient numerical algorithms and is mainly used for light water reactor analyses. Though the primary objective of the AEGIS code is the preparation of a cross section set for SCOPE2 that is a three-dimensional pin-by-pin core analysis code, the AEGIS code can handle not only a fuel assembly but also multi-assemblies and a whole core geometry in two-dimensional geometry. The present paper summarizes the major calculation models and part of the verification/validation efforts related to the AEGIS code.

• Nuclear Engineering and Technology
• /
• v.46 no.5
• /
• pp.719-724
• /
• 2014

During the development process of a thermal-hydraulic system code, a non-regression test (NRT) must be performed repeatedly in order to prevent software regression. The NRT process, however, is time-consuming and labor-intensive. Thus, automation of this process is an ideal solution. In this study, we have developed a program to support an efficient NRT for the SPACE code and demonstrated its usability. This results in a high degree of efficiency for code development. The program was developed using the Visual Basic for Applications and designed so that it can be easily customized for the NRT of other computer codes.

• Nuclear Engineering and Technology
• /
• v.42 no.3
• /
• pp.279-296
• /
• 2010

For the analysis of transient two-phase flows in nuclear reactor components, a three-dimensional thermal hydraulics code, named CUPID, has been developed. The CUPID code adopts a two-fluid, three-field model for two-phase flows, and the governing equations were solved over unstructured grids, which are very useful for the analysis of flows in complicated geometries. To obtain numerical solutions, the semi-implicit numerical method for the REALP5 code was modified for an application to unstructured grids, and it has been further improved for enhanced accuracy and fast running. For the verification of the CUPID code, a set of conceptual problems and experiments were simulated. This paper presents the flow model, the numerical solution method, and the results of the preliminary assessment.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.37
• /
• pp.217-250
• /
• 2008

The International Ship and Port Facility Security (ISPS) Code which was developed as the main response of the shipping sector to the miserable event of 11 September 2001 came into effect on 1 July 2004. The ISPS Code designed to detect and eliminate security threats affecting ships and port facilities used in international trade will significantly impact not only on the management and operation of the shipping industry but also on maritime law despite the fact that it is the regulatory framework of public law. It is expected that implementing the ISPS Code will contribute to reinforcement of maritime security on the one hand. However, on the other hand, more intensified security inspection and control measures of port states will also cause delay and additional costs which cause uncertainty in allocating security risk and cost between the contracting parties. Therefore, it is desire to insert new security clause dealing with main security issues or adapt existing clauses to new shipping environments to minimize disputes.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.11
• /
• pp.735-744
• /
• 2010

An efficient code has been developed to predict dispersion of indoor air pollutants. The computing capability of the code has been compared with that of a commercial code in a benchmark test. After that, the code has been employed to compute dispersion of a pollutant released from a new furniture, a kind of Sick Building Syndrome(SBS). A sofa which generates formaldehyde is implemented by using an immersed boundary method. Large Eddy Simulation (LES) is employed to obtain time-dependent velocity and concentration fields. LES has been regarded as an academic tool, but the newly-developed code reveals a possibility of application of LES to practical problems, especially dispersion of indoor pollutants.

• Proceedings of the KSR Conference
• /
• 2002.10b
• /
• pp.884-891
• /
• 2002

This report is the result performed the structural analysis and the static and fatigue load test of bogie frame for the purpose of designing and verifying the bogie frame which satisfy the load condition required in the UIC code. This investigation is proposed the efficient draft of the design to satisfy the load condition required in the UIC code. And It is performed the structural analysis to evaluate the static strength and the fatigue life of the patient material and the welded part. Also, This is proposed the efficient draft of the test to satisfy the method of the static and fatigue test required in the UC code. And it is carried out the static and the fatigue load test to verify it. We can designed the bogie frame in compliance with UIC 515-4 and 615-4 code.

• Journal of Biomedical Engineering Research
• /
• v.15 no.1
• /
• pp.83-88
• /
• 1994

The transform trellis code is an optimal source code as a block size and the constraint length of a shift register go to infinite for stationary Gaussian sources with the squared-error distortion measure. However to implement this code, we have to choose the finite block size and constraint length. Moreover real-world sources are inherently non stationary. To overcome these difficulties, we developed a training algorithm for the transform trellis code. The trained transform trellis code which uses the same rates to each block led to a variation in the resulting distortion from one block to another. To alleviate this non-uniformity in the encoded image, we constructed clusters from the variance of the training data and assigned different rates for each cluster.

• IE interfaces
• /
• v.8 no.3
• /
• pp.155-169
• /
• 1995

일반적인 CAD/CAM 시스템을 이용해서 생성한 NC-code는 오류의 가능성의 항시 내포되어 있으므로, 실 가공하기 전에 NC-code의 불량 여부를 검사할 필요가 있다. 본 논문에서는 Z-map 형태의 계산모형을 이용한 모의가공의 계산방법을 볼엔드밀, 평엔드밀, 라운드엔드밀에 대해서 도식적으로 설명하였다. 또, 모의가공 된 형상만으로 NC-code의 불량 여부를 검사하는 자체적인 검사방법과 모의가공 된 형상과 설계형상을 비교해서 불량여부를 판별하는 비교 검사방법을 제시하였다. Z-am 모델을 모의가공과 가공형상의 검증에 사용하면, 빠른 속도로 실제가공 상황을 재현 할 수 있고 육안 검증을 포함한 다양한 수치적 검증이 가능하다. 또, 간단한 데이터 구조이므로 필요한 앨고리즘을 효율적이고, 로버스트하게 구현할 수 있다.