• Journal of Environmental Science International
• /
• v.23 no.3
• /
• pp.379-386
• /
• 2014

Adsorption and biodegradation performance of tetracycline antibiotic compounds such as ttetracycline (TC), oxytetracycline (OTC), minocycline (MNC), chlortetracycline (CTC), doxycycline (DXC), meclocycline (MCC), demeclocycline (DMC) on granular activated carbon (GAC) and anthracite-biofilter were evaluated in this study. Removal efficiency of seven tetracycline antibiotic compounds showed 54%~97% by GAC adsorption process (EBCT: 5~30 min). The orders of removal efficiency by GAC adsorption were tetracycline, demeclocycline, oxytetracycline, chlortetracycline, doxytetracycline, meclocycline and minocycline. Removal efficiencies of seven tetracycline antibiotic compounds showed 1%~61% by anthracite biofiltration process (EBCT: 5~30 min). The highest biodegradable tetracycline antibiotic compound was minocycline, and the worst biodegradable tetracycline antibiotic compounds were oxytetracycline and demeclocycline.

• Journal of Advanced Marine Engineering and Technology
• /
• v.5 no.1
• /
• pp.28-33
• /
• 1981

The characteristics of typical 35 kinds of domestic anthracites among 155 kinds are studied to find the calculation formula for the required quantity of air and the combustion gas quantity. 1) The author's calculation formulae are as follows: ${A_0}={\frac{1, 000}{1, 064}}{H_1}+0.086(Nm^3/kg)$ ${G_0}={\frac{1, 000}{1, 110}}{H_1}+0.234(Nm^3/kg)$(1) Theoretically required quantity of air (2) Theoretical quantity of combustion gas 2) Theoretical quantity of air in combustion of domestic anthracite is always estimated more with Rosin's formula than author's one in the typical domestic anthracites which have the lower calorific value between 3, 000-8, 000 Kcal/kg and the difference of the calculated quantity of air becomes small, as the calorific value increases. 3) Theoretical quantity of combustion gas is estimated more by author's formula than by Rosin's one with the domestic anthracites which have more calorific value than 6, 700 Kcal/kg and is estimated less in the under range of the above calorific value. 4) Theoretical quantity of required air and quantity of combustion gas of domestic anthracite show ${\pm}$4% difference by Rosin's formulae in comparison with results of actual analysis, and about ${\pm}$1.5% by the author's one.

• 한국연소학회:학술대회논문집
• /
• 2002.06a
• /
• pp.237-246
• /
• 2002

가압유동층연소로(bed dia. 0.17m, freeboard dia. 0.25, total height 5m)에서 국내무연탄을 연소시켜 이에 대한 탈황특성을 고찰하였다. 실험은 압력($2{\sim}6atm$), 요동층온도(($850{\sim}950^{\circ}C$), 과잉공기(10, 20, 30,%)등의 조건과, 탈황을 위한 Ca/S몰비(($0.8{\sim}4.8$)가 탈황특성에 미치는 영향을 고찰하였다. 결과적으로, 본 연구의 실험범위에서 연소효율은 $80{\sim}99%$를 보였고, 연소온도, 압력 그리고 과잉공기가 증가 할수록 증가하였다. 배가스중의 $SO_2$배출농도는 압력, Ca/S몰비가 증가함에 따라 감소하였다. 탈황율은 상압에서 층(bed)온도의 증가에 따라 감소하였다. 운전압력이 증가함에 따라 탈황율의 감소폭이 둔화되었다. 과잉공기가 증가함에 따라 탈황율은 증가하는 경향을 나타냈다. 각각의 운전압력에서 과잉공기의 증가에 따라 약 10%의 증가폭을 보였다. 국내무연탄을 연소하는 경우 운전압력 4atm일 때 Ca/S몰비는 4이상 주입하여야 하고, 6atm일 때 Ca/S 몰비가 2.5이상주입하여야 150ppm이하를 보여 배출규제치를 만족하는 것을 보였다.

• Journal of Preventive Medicine and Public Health
• /
• v.14 no.1
• /
• pp.75-80
• /
• 1981

Due to rapid industrialization and economic development, the occupational diseases have appeared as one of the social problems in Korea. Up until now little has been known about the prevalence rate, predisposing factors and symptomatology of the occupational disease due to localized vibration in Korea. The researcher intends to investigate the prevalence rate and affecting factors of the occupational disease due to localized vibration among rock-drillers in the anthracite mines. A total of 135 rock-drillers were interviewed and examined from May 15th to 31th, 1980. The results were revealed as follows; 1. The prevalence rate of the vibration syndrome among rock-drillers was 12.6%. 2. The latent period of the vibration syndrome was 6.8 years. 3. The prevalence rate of the vibration syndrome was not significantly different between smokers and non-smokers. 4. With the increase of total vibration exposure time, the prevalence rate of the vibration syndrome increased also. 5. The average vibration sensation threshold was high (6.4dB) in stage 1 of the vibration syndrome and low (-0.6dB) in stage 0. 6. The average pain sensation threshold was high (4.4g) in stage 1 of the vibration syndrome and low (2.5g) in stage 0.

• Journal of Energy Engineering
• /
• v.10 no.3
• /
• pp.243-252
• /
• 2001

Combustion characteristics of domestic anthracite coal were observed by high-pressure thermogravimetric analyzer with variation of pressure (1~16 atm) and heating rate (15, 20, $25^{\circ}C$/min) with non-iso-thermal method (temperature range : 25~100$0^{\circ}C$). Measured combustion reaction rate increased with increasing pressure. This result could be explained by the fact that the activation energy of coal combustion decreased with increasing pressure. Reaction order of coal combustion determined by Freeman and Carroll$^{[11]}$ method linearly increased from 1.04 to 1.30 and activation energy decreased from 47.37 to 14.42 Kcal/mol as pressure increased from 1 to 16 attn.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.3
• /
• pp.220-225
• /
• 1994

This study was conducted to investigate the influence of treatment of fly ash on heavy metal contents in the grain. Rice was cultivated on the two types of paddy field, clay loam and sandy loam soil, with 0, 4, 8, 12t/10a of anthracite fly ash and bituminous coal fly ash, respectively. And soybean was cultivated on the same types of upland field with those of 0, 3, 6, 9t/10a, respectively. Also. rice and soybean were cultivated the same types of paddy and upland field with those ashes of 0, 12ton/10a and 0, 9ton/10a, yearly for three years. At the harvest time, the heavy metal contents in rice and soybean were Investigated. The results were summarized as follows : 1. Amount of application. 1) The contents of Cd in brown rice increased in the clay loam soil. Cr and Ni increased sandy loam soil with the application of anthracite fly ash. 2) The contents of Zn in rice increased in the sandy loam soil with the application of bituminous coal fly ash. 3) The contents of Cu in soybean increased with the application of anthracite and bituminous coal fly ash, but Zn, Pb, Cr and Ni increased only with the bituminous. 2. Successive application. 1) The contents of Cd in brown rice increased in the clay and sandy loam soil, however Cu, Zn, Ni, Cr and Fe increased only in sandy loam soil with the anthracite fly ash. 2) The contents of Cr in soybean were increased in the clay and sandy loam soil, but Cu, Fe increased only sandy loam soil with anthracite fly ash. 3) The contents of Cd, Zn, and Cr in brown rice increased in the clay and sandy loam soil, but those of Cu, Mn increased only in the sandy loam soil with application of bituminous. 4) The contents of Cd, Pb, and Cr in soybean increased in the sandy loam soil with the application of bituminous coal fly ash.

• Journal of Sericultural and Entomological Science
• /
• v.10
• /
• pp.1-25
• /
• 1969

Since widely use of anthracite for the radiating purpose in a rearing room in Korea, the weakness of silkworm, poor uniformity of the worm growth, the increase of missing worm ratio, unusual cocoon assorting ratio, and the decrease of cocoon layer ratio have been realized by the author, therefore, he has started out to search the mechanism of these evil influences regarding with various gas densities and terms of the gas treatment which will be supposed to be a warning for temperature control during the silkworm reading work. Among the anthracite gas components, CO or SO$_2$ influence and their complexed harm effect were investigated through the use of anthracite gas, CO and SO$_2$ gas. Meantime, each treatment was applied, separately, during the worm egg stage, young instar, adult instar and whole instar, because the harm intensity for any improperable rearing condition is flexible by the growing stages. Meantime, the gas density and term variation were applied for the above each treatment such as in case of anthracite and CO gas, the following treat methods were used. 1) 0.06% for 30 mins. 2) 0.06% for 1 hour. 3) 0.1% for 1 hour. 4) 0.15% for 1 hour. on the other hand, SO$_2$ gas was used as 1) 120ppm for 30 mins. 2) 200ppm for 30 mins. 3) 400ppm for 30 mins. The measurement of gas density was proceeded by using CO tester (Carbon Monoxide Indicator) and SO$_2$ tester (Indicator Sampler Cgf) which could keep any specific density before each treatment.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.5
• /
• pp.485-493
• /
• 2011

In Korea, PM (Particulate Matter) emissions caused by coal-fired power plants are measured by a system, so called Clean Air Policy Support System (CAPSS), which uses foreign emission factors. However, the system fails to reflect the characteristics of domestic power plants. In this regard, this study aims to develop local, accurate domestic emission factors. The study measured the amount of TSP (Total Suspended Particulates), PM10 and PM2.5 by collecting samples from the latter parts of pollution control devices which were installed at 3 bituminous-fired power plants and 3 anthracite-fired power plants. The results showed that the average concentrations of TSP, PM10 and PM2.5 measured at bituminous-fired power plants were 4.63 mg/$Sm^3$, 2.96 mg/$Sm^3$ and 3.07 mg/$Sm^3$ respectively, much higher than those from anthracite-fired power plants (2.96 mg/$Sm^3$, 2.47 mg/$Sm^3$ and 1.37 mg/$Sm^3$, respectively). In addition, bituminous-fired power plants showed higher ratios of PM10/TSP and PM2.5/TSP with 0.66 and 0.92, respectively, compared to 0.82 and 0.46, the ratios of PM10/TSP and PM2.5/TSP measured in anthracite-fired power plants. Emission factors based-on concentration measurements were also higher for bituminous-fired power plants, and PM with smaller particles tended to have bigger difference in emission factors between the two fuels. This study calculated the amount of PM emissions by using the estimated emission factors. When it comes to the PM emissions, it was less than that of CAPSS while similar to that of CleanSYS in its amount. It is expected that the emission factors developed by this study will be used in Korea replacing foreign emission factors currently used in Korea by ensuring the objectivity and reliability as domestic emission factors.

• Korean Journal of Soil Science and Fertilizer
• /
• v.30 no.2
• /
• pp.161-167
• /
• 1997

The effect of Bituminous and Anthracite coal ash(fly ash) on the performance of Chinese cabbage on an acid soil was studied through a pot experiment. The levels of application of the materials tested were five, 10 and 15% of dry soil weight. Regardless of the kind of fly ash, the application of it, tended to increase the yield of Chinese cabbage by 13 to 24% in fresh weight. Difference in application levels did not result in the difference in increasing the yield of Chinese cabbage. The application of fly ash tended to lower the all of the mineral nutrient contents in the Chinese cabbage, excepting boron. Boron content tended to increase along with the application of fly ash. Bituminous ash raised the pH of soil and increased available P, exchangeable Ca and soluble boron in the soil remarkably. Anthracite ash, on the other hand, did not increase the contents of other components in the soil, than soluble born.

• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.2
• /
• pp.130-134
• /
• 1995

To investigate the influence of coal fly ash treatment on the heavy metal content in the infilteration water, 12t/10a/year of fly ash(Anthracite and Bituminous) were applicated at two paddy fields of different textured soils, clay loam and sandy loam, for 3 and 2 years, respectively. The infilteration waters were collected 30, 60 and 100cm of soil depth and the heavy metal contents were measured. In the paddy field of clay loam, the content of Zn in the infilteration water were increased with fly ash treatment and increasing soil depth, but it didn't show any significance. In the clay loam soil, successive application of fly ash for 3 years brought to increase Pb, Zn content in the infilteration water, Pb content was the highest at 100cm of soil depth, but the content of others were lower than non-treatment. In the paddy field of sandy loam, successive application of fly ash for 2 years increased Cd, Ni and Mn content in the infilteration water at anthracite ash application, but the contents of other elements were similar or lower than non-treatment.