• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1071-1072
• /
• 2006

Maglev using EMS becomes unstable by unexpected big air-gap disturbance. The main causes of the unexpected air-gap disturbance are step-wise rail joint and large distance between rail splices. For the stable operation of the Maglev, the conventional system uses the threshold method, which selects one gap sensor among two gap sensors installed on the magnet to read the gap between magnet and guide rail. But the threshold method with a wide bandwidth makes the discontinuous air-gap signal at the rail joints because of the offset in air gap sensors and/or the step-wise rail joins. Further more, in the case of the one with a narrow bend-width, it makes Maglev system unstable because of frequent alternation. In this paper, a new method using fuzzy rule to reduce air-gap disturbances proposed to improve the stability of Maglev system. It treats the air-gap signal from dual gap sensors effectively to make continuous signal without air gap disturbance. Simulation and experiment results proved that the proposed scheme was effective to reduce air-gap disturbance from dual gap sensors in rail joints.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.310-312
• /
• 2006

Maglev using EMS becomes unstable by unexpected big air-gap disturbance. The main causes of the unexpected air-gap disturbance are step-wise rail joint and large distance between rail splices. For the stable operation of the Maglev, the conventional system uses the threshold method, which selects one gap sensor among two gap sensors installed on the magnet to read the gap between magnet and guide rail. But the threshold method with a wide bandwidth makes the discontinuous air-gap signal at the rail joints because of the offset in air gap sensors and/or the step-wise rail joins. Further more, in the case of the one with a narrow bend-width, it makes Maglev system unstable because of frequent alternation. In this paper, a new method using fuzzy rule to reduce air-gap disturbances proposed to improve the stability of Maglev system. It treats the air-gap signal from dual gap sensors effectively to make continuous signal without air gap disturbance. Simulation and experiment results proved that the proposed scheme was effective to reduce air-gap disturbance from dual gap sensors in rail joints.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(2)
• /
• pp.636-643
• /
• 1995

The accurate determination of the fuel-cladding gap conductance as functions of rod burnup and power level may be a key to the design and safety analysis of a reactor. The incorporation of a sophisticated gap conductance model into nuclear design code for computing thermal hydraulic feedback effect has not been implemented mainly because of computational inefficiency due to complicated behavior of gap conductance. To avoid the time-consuming iteration scheme, simplification of the gap conductance model is done for the current design model. The simplified model considers only the heat conductance contribution to the gap conductance. The simplification is made possible by direct consideration of the gas conductivity depending on the composition of constituent gases in the gap and the fuel-cladding gap size from computer simulation of representative power histories. The simplified gap conductance model is applied to the various fuel power histories and the predicted gap conductances are found to agree well with the results of the design model.

• Journal of Audiology & Otology
• /
• 제24권3호
• /
• pp.149-156
• /
• 2020

Background and Objectives: The gap prepulse inhibition of the acoustic startle response has been used to screen tinnitus in an animal model. Here, we examined changes in the auditory late response under various conditions of gap prepulse inhibition. Subjects and Methods: We recruited 19 healthy adults (5 males, 14 females) and their auditory late responses were recorded after various stimuli with or without gap prepulsing. The N1 and P2 responses were selected for analysis. The gap prepulse inhibition was estimated to determine the optimal auditory late response in the gap prepulse paradigm. Results: We found that the gap per se generated a response that was very similar to the response elicited by sound stimuli. This critically affected the gap associated with the maximal inhibition of the stimulus response. Among the various gap-stimulus intervals (GSIs) between the gap and principal stimulus, the GSI of 150 ms maximally inhibited the response. However, after zero padding was used to minimize artifacts after a P2 response to a gap stimulus, the differences among the GSIs disappeared. Conclusions: Overall, the data suggest that both the prepulse inhibition and the gap per se should be considered when using the gap prepulse paradigm to assess tinnitus in humans.

• 대한청각학회지
• /
• 제24권3호
• /
• pp.149-156
• /
• 2020

Background and Objectives: The gap prepulse inhibition of the acoustic startle response has been used to screen tinnitus in an animal model. Here, we examined changes in the auditory late response under various conditions of gap prepulse inhibition. Subjects and Methods: We recruited 19 healthy adults (5 males, 14 females) and their auditory late responses were recorded after various stimuli with or without gap prepulsing. The N1 and P2 responses were selected for analysis. The gap prepulse inhibition was estimated to determine the optimal auditory late response in the gap prepulse paradigm. Results: We found that the gap per se generated a response that was very similar to the response elicited by sound stimuli. This critically affected the gap associated with the maximal inhibition of the stimulus response. Among the various gap-stimulus intervals (GSIs) between the gap and principal stimulus, the GSI of 150 ms maximally inhibited the response. However, after zero padding was used to minimize artifacts after a P2 response to a gap stimulus, the differences among the GSIs disappeared. Conclusions: Overall, the data suggest that both the prepulse inhibition and the gap per se should be considered when using the gap prepulse paradigm to assess tinnitus in humans.

• The Korean Journal of Ecology
• /
• 제18권1호
• /
• pp.189-201
• /
• 1995

In order to clarify regeneration processes and mechanisms of the disturbed Pinus densiflora forest, responses of Pinus densiflora to gap formed by disturbance were analysed by growth of saplings and mature and growth equations were obtained from branch growth of mature trees and height growth of saplings, and age distribution of saplings and young trees recruited within gap was analysed in relation to gap age. Height growth of saplings within gaps was accelerated after gap formation. Such abrupt increases of growth of saplings after the gap formation might be resulted in the difference of growth of saplings between gap and non-gap areas. In fact, height and diameter of saplings in the central part of gap were larger than those of saplings in marginal parts of gap and non-gap area. However, density of saplings was not different in both parts. In addition, growth of annual rings of mature trees bordering on gap also increased after gap formation. Branch growth of mature trees bodering on gap was 6.3 - 6.5 cm /year and the mean radius of gaps created by death of only one canopy tree was about 3 m. Therefore, for those gaps to be closed by branch growth it will take 46 years. Growth of saplings within gap showed exponential equation. Fifty years will be required for the saplings to enter the forest canopy by the exponential growth equation. Therefore, gap created by only one tree might be closed by branch growth of surrounding canopy trees in advance of being done by height growth of saplings. But gaps created by death of trees more than 2 will be closed by the growth of saplings. Among the regenerating saplings and young trees within gaps, individuals established in advance of gap formation were more than those established after the gap formation. From these results, it was assumed that the disturbed Pinus densiflora forests in these sites were regenerated by height growth of saplings recruited in advance of gap formation.

• Transactions on Electrical and Electronic Materials
• /
• 제12권4호
• /
• pp.131-134
• /
• 2011

Back-end-of-line using ultra low-k (ULK; k < 2.5) has been required to reduce resistive capacitance beyond 45 nmtechnologies, because micro-processing units need higher speed and density. There are two strategies to manufacture ULK inter-layer dielectric (ILD) materials using an air-gap (k = 1). The former ULK and calcinations of ILD degrade the mechanical strength and induce a high cost due to the complication of following process, such as chemical mechanical polishing and deposition of the barrier metal. In contrast, the air-gap based low-k ILD with a relatively higher density has been researched on the trench-type with activity, but it has limited application to high density devices due to its high air-gap into the next metal layer. The height of air-gap into the next metal layer was reduced by changing to the via-typed air-gap, up to about 50% compared to that of the trench-typed air-gap. The controllable ULK was easily fabricated using the via-typed air-gap. It is thought that the via-type air-gap made the better design margin like via-patterning in the area with the dense and narrow lines.

• Journal of Evidence-Based Herbal Medicine
• /
• 제1권1호
• /
• pp.19-28
• /
• 2008

Consumers have been requiring more higher level of food and agricultural products safety. The system of Good Agricultural Practice(GAP) has been spreaded over the world. Korea also introduced the GAP system in agricultural industry. GAP is related to the production side in the whole traceability system. The establishment of GAP system is a prerequisite to secure food safety. This study reviewed the concept of GAP and necessities and backgrounds of introducing the GAP system. Also, this study analyzed the problems which have been appeared in the GAP program and proposed the policy strategies and directions for the Korean GAP system. So issues for the GAP system are as follows; computerizing of traceability system, forming the cooperative works among the related governmental departments, establishing a certification system to relate with crop features, efficient management, ensuring distribution channel and the research for estimating GAP consumer surplus is need to analyze GAP program more efficient. In addition, It is necessary to keep the records of the data to analyze the GAP program more accurately.

• Nuclear Engineering and Technology
• /
• 제27권3호
• /
• pp.344-357
• /
• 1995

핵연료 소결체와 피복관 사이의 간극 크기에 크게 좌우되는 간극 열전도도는 연료봉내 초기 저장에너지 양에 중요한 영향을 끼친다. 정상상태 계산용 ELESTRES 코드에서 사용 중인 수정된 Ross-Stoute 의 간극 열전도도 모델은 단순한 열적 변형 모델에 기초한다. 최근의 실험에서 핵연료 소결체가 연소됨에 따라서 균열, 소결체 재배열 등이 발생되고, 피복관 내부의 편심에 위치하게 된다는 것이 알려졌다. 본 논문에서는, 최근에 제안된 편심형 간극 모델과 소결체 재배열형 간극 모델 등이 기술되었고, 실험 조건과 중수로 핵연료봉의 운전조건 하에서의 소결체와 피복관 사이의 간극 열전도도를 계산하는데 이용되었다. 실험 치와 계산치가 잘 일치됨으로써, 수정된 Ross-Stoute 모델이 ELESTRES 코드 내에서 사용된 열전달 관련 가정들과 잘 부합됨을 보여 주었다. 출력 경계곡선을 따라서 수정된 Ross-Stoute 모델로 계산된 간극내 열전달과 핵연료 표면 온도 등이 편심형 간극 모델과 소결체 재배열형 간극모델에 의한 예측치보다 보수적이었다.

• 한국도로학회논문집
• /
• 제18권5호
• /
• pp.95-103
• /
• 2016

PURPOSES : Permitted left turn is a turning maneuver in which a vehicle turns left using a gap between oncoming vehicles, called gap acceptance, and it enables for more efficient traffic operation at intersections. In Korea, the permitted left turn has not been a common maneuver at signalized or un-signalized intersections. However, many experts and the Police Agency tried to apply this effective turning maneuver at intersections in Korea since 2010. Though the investigation of gap acceptance is significantly important in understanding a driver's behavior at intersections, there have not been many studies about this topic, specifically a study to develop probability models of gap acceptance behavior. METHODS : In this study, the probability model of gap acceptance behavior for a permitted left turn was developed based on observational field studies. To develop the model, seven variables were analyzed including gap, waiting time, traffic volume, conflict-flow vehicle type, left-turning vehicle type, the number of lane, and time. RESULTS : In the final model, gap and left-turning vehicle type were found to be significant influencing factors. CONCLUSIONS : Through this model development, it was concluded that as the gap size increased, the probability of gap acceptance was higher. Moreover, when a left-turning vehicle was a passenger car, the probability of gap acceptance was higher than compared to large size buses or freight cars.