• 한국산업보건학회지
• /
• 제33권4호
• /
• pp.464-470
• /
• 2023

Objectives: This study evaluated occupational exposures to noise and heat stress during routine non-outage works in three coal-fired power plants in the Republic of Korea. Methods: The data were collected during the summer of 2020. Full shift noise exposure of 52 workers were measured using noise dosimeters. Heat stress of 16 worksites were measured for 70 minutes using wet-bulb globe temperature monitors. Results: The noise dosimetry results revealed time-weighted averages that ranged from 47.5 to 88.9 dBA. 2 out of 52 noise measurements exceeded 85 dBA. Based on the arithmetic mean, the coal service group showed the highest level at 80.2 dBA by job tasks. Noise exposures exceeding 85 dBA were measured in the coal service and plant operator group. Heat stress index measurements ranged from 20.3℃ to 37.2℃. 1 out of 9 indices measured in coal facilities and 4 out of 7 indices measured in boiler house exceeded 1 hour TWA during moderate work. Heat stress indices measured from boiler houses were significantly higher than those measured from coal equipment. Conclusions: The results show that overexposure to noise and heat stress may be encountered during routine non-outage work activities in coal-fired power plants. Appropriate actions should be taken to reduce future health outcome from occupational exposure to noise and heat stress in the industry.

• 한국산업보건학회지
• /
• 제29권4호
• /
• pp.603-609
• /
• 2019

Objectives: This case report aims to contribute to the enhancement of training quality for occupational accident prevention by conducting surveys on customers' satisfaction with the training course management by the Occupational Safety and Health Training Institute (OSHTI) of KOSHA. Methods: Surveys were conducted through phone calls, customer service documents, and questionnaires from January 1, 2018 to December 31, 2018. Results: The surveys showed an answer rate of 97.36% and handling rate of 97.47% in 2018, an increase of 1.15% compared to 2017. The number of monthly inbound calls in 2018 was 5,902, rising 0.10% year-on-year, and the average inbound calls per day in 2018 was 289, a decline from 291 the year before. The number of provisions of customer service in 2018 was 68,952, increasing 1.89% year-on-year. The number of inquiries on the training curriculum was 58,744 in 2018, an increase of 3.98% compared to the 56,498 recorded in 2017. Inquiries on job training centers were the most common, numbering 27,114 (39.32%), followed by e-learning 18,470 (26.79%) and expert courses 13,160 (19.09%). Of the 149 answers to the customer service survey, 'Nothing to complain about' accounted for 86 (56.72%) and 'Diversifying training time and programs' numbered 22 (14.77%). Conclusions: Customer satisfaction in 2018 increased compared to that in 2017. However, there is a need to reflect the demands of customers for diversifying training time and programs, offer practice-centered training, and collect opinions on providing information in order to maintain high quality training course management.

• Safety and Health at Work
• /
• 제4권1호
• /
• pp.71-74
• /
• 2013

Here, we present a case of lung cancer in a 48-year-old male horse trainer. To the best of our knowledge, this is the first such case report to include an exposure assessment of respirable crystalline silica (RCS) as a quartz. The trainer had no family history of lung cancer. Although he had a 15 pack/year cigarette-smoking history, he had stopped smoking 12 years prior to his diagnosis. For the past 23 years, he had performed longeing, and trained 7-12 horses per day on longeing arena surfaces covered by recycled sands, the same surfaces used in race tracks. We investigated his workplace RCS exposure, and found it to be the likely cause of his lung cancer. The 8-hour time weight average range of RCS was 0.020 to $0.086mg/m^3$ in the longeing arena. Horse trainers are exposed to RCS from the sand in longeing arenas, and the exposure level is high enough to have epidemiological ramifications for the occupational risk of lung cancer.

• Safety and Health at Work
• /
• 제11권1호
• /
• pp.41-49
• /
• 2020

Background: We performed this study to investigate the inequalities in site-specific cancer incidences among workers across different occupations in Korea. Methods: Subjects included members of the national employment insurance. Incident cancers among 8,744,603 workers were followed from 1995 to 2007. Occupational groups were classified according to the Korean Standard Occupational Classification. Age-standardized incidence rate ratios were calculated. Results: We found that men in service/sales and blue-collar occupations had elevated rates of esophageal, liver, laryngeal, and lung cancer. Among women, service/sales workers had elevated incidences of cervical cancer. Male prostate cancer, female breast, corpus uteri, and ovarian cancers, as well as male and female colorectal, kidney, and thyroid cancer showed lower incidences among workers in lower socioeconomic occupations. Conclusions: Substantial differences in cancer incidences were found depending on occupation reflecting socioeconomic position, in the Korean working population. Cancer prevention policy should focus on addressing these socioeconomic inequalities.

• 한국직업건강간호학회지
• /
• 제11권2호
• /
• pp.108-120
• /
• 2002

This study analyzed the managerial efficiency of 11 organizations, the branch centers of a occupational health service organization in Korea, using the Data Envelopment Analysis (DEA) method. The DEA is a good method for evaluating health services since it can handle multiple inputs and outputs simultaneously, and also identify the sources and amount of inefficiency. The author approached this study using two efficient models: the monetary value model and the real value model. The DEA method based on the monetary value model included cost factors, while the real value model excluded cost factors. The input variables used were manpower of physicians, medical technicians, nurses, industrial hygienists and administrators; labor, maintenance, and material expenses. The output variables used were the number of medical examinations, workplace evaluations, group health management services and income from each service. The major results were as follows: First, in the monetary value model, 6 out of 11 organizations (54.6%) showed an efficiency score of 1.0, which means that they have been operating in very efficient ways. However, 5 organizations (46.4%) showed themselves to be relatively inefficient. Second, in the real value model, 7 out of 11 organizations (63.4%) showed an efficiency score of 1.0, which means they have been operating efficiently, while 4 organizations (46.4%) showed themselves to be relatively inefficient. Third, the reliability of DEA method were analyzed by comparing the results of the monetary value model and real value model. The results of 8 out of 11 organizations were same in terms of being efficient or not. Thus, the DEA could be a valid application method for occupational health service organizations. Fourth, the organizations that displayed common inefficiency in both the monetary value model and in the real value model 3, 9, and 10, were also considered to be managed inefficiency from expertise opinion. In summary, this study evaluated the efficiency of occupational health service organizations applying the DEA method with different variables, and found that the results of analysis could be valid in terms of both modeling and expert sense. In the future, the DEA method will be used as a useful tool to identify and evaluate the efficiency of occupational health service organizations through more applications and refinements.

• 대한추나의학회지
• /
• 제3권1호
• /
• pp.125-139
• /
• 2002

Objectives : The purpose of this study is to review and summarize about occupational medicine and to applicate the occupational medicine to oriental medicine. Methods : We investigated several books, articles and related internet sites to know occupational medicine's present conditions in Korea and other countries, and researched the plan on oriental medical participation in the industrial health. Results and Conclusion : The conclusions are as follows, 1. Recent years, industrialization has changed working environment and health condition in workplace, so industrial health service has became important part. 2. Occupational medicine has the purpose of protection. prevention, fitness, health management, medical treatment. rehabilitation, and primary medical service. The range of occupational medicine is enlarged mental, social good health and social, economical production capacity recently. 3. After research each country's occupational medicine, we can know the purpose is same, but the system and work contents are different one another. 4. Oriental medical participation in the industrial health has various benefits, satisfaction of workers, efficiency of cost, and increasing rate of medical treatment through the western and oriental medical cooperation.

• Safety and Health at Work
• /
• 제4권4호
• /
• pp.216-220
• /
• 2013

A 46-year-old man who had worked as a bumper spray painter in an automobile body shop for 15 years developed lung cancer. The patient was a nonsmoker with no family history of lung cancer. To determine whether the cancer was related to his work environment, we assessed the level of exposure to carcinogens during spray painting, sanding, and heat treatment. The results showed that spray painting with yellow paint increased the concentration of hexavalent chromium in the air to as much as $118.33{\mu}g/m^3$. Analysis of the paint bulk materials showed that hexavalent chromium was mostly found in the form of lead chromate. Interestingly, strontium chromate was also detected, and the concentration of strontium chromate increased in line with the brightness of the yellow color. Some paints contained about 1% crystalline silica in the form of quartz.

• 한국산업보건학회지
• /
• 제29권3호
• /
• pp.278-288
• /
• 2019

Objectives: The objectives of this study are to summary controversy over health risks among semiconductor workers, to review major cancer risk results conducted in semiconductor operation and to evaluate occupational health activities in Korea for controlling hazardous agents generated in semiconductor operations Methods: Major occupational health issues that has been social controversies among semiconductor workers since 2007 were reviewed through an extensive literature, report and article review. Results: Since a female semiconductor worker aged 22 died from leukemia in 2007, job-association of a number of former semiconductor workers with various types of cancer and rare diseases have been denied by the Korea Workers' Compensation and Welfare Service (KWCWS), but some of them were later awarded compensation as an occupational disease by the administrative court. Two epidemiologic cancer risk studies conducted in Korea found increased risks in leukemia and non-Hodgkin's lymphoma among semiconductor workers. Various legal occupational health activities taken in semiconductor industry were found to fail to assess a complex characteristics of semiconductor operations, such as drastic changes in chemical use, processes, and technology, multiple exposure. National compensation regulation also showed the limitation to evaluate job-association of semiconductor workers who had worked in semiconductor operation. Conclusions: National legal measures should be taken to improve several occupational health activities and duties for protecting workers. In addition, the KWCWS program should be revised so that all workers who meet minimal job or environment associations can be compensated.

• Safety and Health at Work
• /
• 제5권2호
• /
• pp.91-96
• /
• 2014

Background: Chronic obstructive pulmonary disease (COPD) is an important cause of occupational mortality in miners exposed to coal mine dust. Although the inflammatory mediators involved in COPD have not been defined, many studies have shown that inflammatory mediators such as reactive oxygen and nitrogen species are involved in orchestrating the complex inflammatory process in COPD. Methods: To investigate the relevance of exhaled biomarkers of oxidative and nitrosative stress in participants with COPD, we determined the levels of hydrogen peroxide, malondialdehyde (MDA), and 3-nitrotyrosine (3-NT) in exhaled breath condensate (EBC) in 90 retired elderly coal miners (53 non-COPD and 37 COPD participants). Results: Mean levels of MDA (4.64 nMvs. 6.46 nM, p = 0.005) and 3-NT (3.51 nMvs. 5.50 nM, p = 0.039) in EBC were significantly higher in participants with COPD. The median level of MDA did show statistical difference among the COPD severities (p = 0.017), and the area under the receiver operating characteristic curve forMDA (0.67) for the diagnostic discrimination of COPD indicated the biomarker. The optimal cutoff values were 5.34 nM (64.9% sensitivity and 64.2% specificity) and 5.58 nM (62.2% sensitivity and 62.3% specificity) forMDA and 3-NT, respectively. The results suggest that high levels ofMDA and 3-NT in EBC are associated with COPD in retired elderly miners. Conclusion: These results showed that the elevated levels of EBC MDA and EBC 3-NT in individuals with COPD are biomarkers of oxidative or nitrosative stress.

• Safety and Health at Work
• /
• 제2권2호
• /
• pp.87-96
• /
• 2011

In 1967, the problem of occupational lead exposure came to public attention in Korea. Since then, regular progress has been made in lowering workplace lead exposures, instituting new workplace controls, and implementing health examinations of exposed workers. Past serious lead poisoning episodes made it possible to introduce biological monitoring programs on a voluntary basis in high-lead-exposure facilities in Korea. Industry-specific occupational health services for lead workers in Korea during the last 22 years can be categorized into three phases. During the first phase (1988-1993), efforts were directed at increasing awareness among workers about the hazards of lead exposure, biological monitoring of blood zinc protoporphyrin began, and a respiratory protection program was introduced. During the second phase (1994-1997), a computerized health management system for lead workers was developed, blood-lead measurement was added to biologic monitoring, and engineering controls were introduced in the workplace to lower air-lead levels to comply with air-lead regulations. Finally, during the third phase (1998-present), a new biomarker, bone-lead measurement by X-ray fluorescence, was introduced. Bone-lead measurement proved to be useful for assessing body burden and to demonstrate past lead exposure in retired workers. Occupational health service practice for lead workers, including the industry-specific group occupational health system, has brought considerable success in the prevention of lead poisoning and in reducing the lead burden in Korean lead workers during the last several decades. The successful achievement of prevention of lead poisoning in Korea was a result of the combined efforts of lead workers, employers, relevant government agencies, and academic institutes.