• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.1
• /
• pp.91-99
• /
• 2017

Domestically developed concrete storage casks include an internal canister to maintain the confinement integrity of radio-active materials. In this study, we analyzed the depth of flaws caused by loads that propagate canister weld cracks under normal, off-normal and accident conditions, and evaluated the maximum allowable weld flaw depth needed to secure the structural integrity of the canister weld and to reduce the welding time of the internal canister lid of the concrete storage cask. Structural analyses for normal, off-normal and accident conditions were performed using the general-purpose finite element analysis program ABAQUS; the allowable flaw depth was assessed according to ASME B&PV Code Section XI. Evaluation results revealed an allowable canister weld flaw depth of 18.75 mm for the concrete storage cask, which satisfies the critical flaw depth recommended in NUREG-1536.

• Journal of Radiation Industry
• /
• v.17 no.3
• /
• pp.283-292
• /
• 2023

Spent nuclear fuel corresponds to high-level radioactive waste that has high decay heat and radioactivity. Accordingly, Spent nuclear fuel withdrawn from the reactor core is primarily stored and managed in a spent nuclear fuel pool in the nuclear power plant to reduce decay heat and radioactivity. In Korea, most nuclear power plant store all spent nuclear fuel in a spent nuclear fuel pool. For wet storage, there are no defense in depth different with reactor core. The study related to spent nuclear fuel pool accident should be carried out to ensure safety. Therefore, it is necessary to analyze previous study cases related to safety of spent nuclear fuel pool and accident cases to build foundational knowledge. The Objective of this study is to analyze study cases of safety assessment and cases for spent nuclear fuel pool accident. For analyzing study cases of safety assessment, possible phenomena when spent nuclear fuel pool accident occurring identified, Subsequently, study cases for safety assessment about each phenomena were investigated, and materials & methods and results for each study are analyzed. For analyzing cases for spent nuclear fuel pool accident, we analyzed accident cases caused by loss of cooling and loss of coolant in spent nuclear fuel pool. Subsequently, causes and change of water level and temperature by each accident case are analyzed. As a result of the analysis on study cases of spent nuclear fuel pool accident, the results of the study conducted by each research institute were vary depending on the computer code, materials & methods of experiment and major assumptions used in the study. As a result of analyzing cases for spent nuclear fuel pool accident, it was found that accident cases for loss of cooling is more than cases for loss of coolant accident. Even though the types of accident in spent nuclear fuel pool were similar, the specific causes were different by each accident case. All the accident cases analyzed did not lead to severe accidents, such as nuclear fuel being exposed to the air. The result of this study will be used as fundamental data for study on spent nuclear fuel pool accident that will be conducted in the future.

• Safety and Health at Work
• /
• v.7 no.3
• /
• pp.213-217
• /
• 2016

Background: The objective of this study is to identify high-risk groups for industrial accidents by setting up 2003 as the base year and conducting an in-depth analysis of the trends of major industrial accident indexes the index of industrial accident rate, the index of occupational injury rate, the index of occupational illness and disease rate per 10,000 people, and the index of occupational injury fatality rate per 10,000 people for the past 10 years. Methods: This study selected industrial accident victims, who died or received more than 4 days of medical care benefits, due to occupational accidents and diseases occurring at workplaces, subject to the Industrial Accident Compensation Insurance Act, as the study population. Results: According to the trends of four major indexes by workplace characteristics, the whole industry has shown a decreasing tendency in all four major indexes since the base year (2003); as of 2012, the index of industrial accident rate was 67, while the index of occupational injury fatality rate per 10,000 people was 59. Conclusion: The manufacturing industry, age over 50 years and workplaces with more than 50 employees showed a high severity level of occupational accidents. Male workers showed a higher severity level of occupational accidents than female workers. The employment period of < 3 years and newly hired workers with a relatively shorter working period are likely to have more occupational accidents than others. Overall, an industrial accident prevention policy must be established by concentrating all available resources and capacities of these high-risk groups.

• Journal of Navigation and Port Research
• /
• v.43 no.5
• /
• pp.302-309
• /
• 2019

This study introduces the navigational environment database(DB) compiling water depth, sediment type and marine managed areas (MMAs) in coastal waters of South Korea. The water depth and sediment data were constructed by combining their sparse points of electronic navigation chart and survey data with high spatial resolution using the inverse distance weighting and natural neighbor interpolation method included in ArcGIS. The MMAs were integrated based on all shapefiles provided by several government agencies using ArcGIS because the areas should be used in an emergency case of ship. To test the validity of the constructed DB, we conducted a test application for grounding and anchoring zones using a ship accident case. The result revealed each area of possible grounding candidates and anchorages is calculated and displayed properly, excluding obstacle places.

• Journal of the Korean Society of Safety
• /
• v.23 no.3
• /
• pp.71-78
• /
• 2008

This study aims to identity the age group where driving performance significantly decreases based on the data collected from the Korea Transportation Safety Authority's driver aptitude tests in 2006. The test includes following six driving simulator-based tests: estimation of moving objects' speed, estimation of stopping distance, three tests for drivers' multi-task ability, and kinetic depth perception. These six test results were utilized for the identification of the age threshold applying the CART technique, suggesting driving ability significantly be decreased over 50s. This finding was confirmed by two analyses using the accident history data containing the information of accident and non-accident drivers and the degree of accident severity. The results of this study imply that accident prevention efforts should be enhanced over a wider range of age group than the current practice where the age of 65 is generally applied for the threshold dividing senior and non-senior driver groups.

• Journal of information and communication convergence engineering
• /
• v.10 no.2
• /
• pp.181-186
• /
• 2012

Telematics services include automatic location tracking for emergency rescue, which is available for use in case of a car accident due to falling off roadways. This paper presents a simulation study on how far a car will fall before it hits the ground if it drops off of a roadway due to an accident or a natural disaster. The greatest horizontal distance the falling car can travel is presented in this paper, based on the assumption that air resistance as well as the direction and degree of acceleration due to gravity is negligible. This paper also presents the depth of the dent caused by the car sinking into the ground, the time it took for the car to fall free, and the velocity at which it travelled and horizontal distance it traveled. In this paper, the damage done to cars that crash into the ground and the dangers thereof are graphically represented.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.17 no.2
• /
• pp.90-100
• /
• 2021

Molten corium-concrete interaction (MCCI) is one of the most important phenomena that can lead to the potential hazard of late containment failure due to basemat penetration during a severe accident. In this study, MCCI analytical models of the CORQUENCH code were prepared through verification calculations of several experiments, which had been performed using concrete types similar to those of the calandria vault floor in CANDU-6 plants. The behaviors of thermal-hydraulic variables related to MCCI phenomena were analyzed under the conditions of dry floor and water flooding during the severe accident stemming from a hypothetic station blackout. Uncertainty analyses on the ablation depth were also carried out. It was estimated that the concrete ablation was not interrupted due to the continuous MCCI process under the dry condition but was terminated within 24 hours under the water flooding condition. It was confirmed that the water flooding as a mitigating action was effective to achieve the quenching and thermal stabilization of the melt discharged from the calandria vessel, showing that the present models are capable of reasonably simulating MCCI phenomena in CANDU-6 plants. This study is expected to provide the technical bases to the accident management strategy during the late-phase severe accidents.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.1
• /
• pp.65-84
• /
• 2006

This study was to suggest the necessity of depth research in order to enhance the effectiveness of technical consulting system. And the purpose of this study was to decrease the construction accidents to some extent, being on the increase day by day as it takes issue properly and suggest a reform measure. As for research method, it executed the collection of public opinions widely and questionnaire with the bibliography, expert of construction safety, the related institutions, academic world, safety association, and director of construction site. Also, it was to suggest the reform measure by the stage, classifying the problems on the system and operation by 4 stages like a stage of delivery of subscription and supervision, a stage of contract with guidance of technology, a stage of executing the guidance work of technology, and a stage of performance of advice.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.8 no.2
• /
• pp.71-78
• /
• 2002

For the first Maritime Accident Inquiry System in Korea, Central Marine Accidents Inquiry Committee were founded in Seoul and District Marine Accidents Inquiry Committee in Busan city In 1963 to determine the circumstances of the accidents and causes. At the present day, it was settled as Maritime Safety Tribunal tough several revision of the Law and regulations regarding the Maritime Accident Inquiry System. In Korea, there occurred about m cases of marine accident, and as a result, about 200 people were lost human lives in average per year. In accordance with the change of circumstances such as traffic increasing and being bigger in size, being faster in speed, etc., the causes of the marine accidents become complicated year by year. Accordingly, in this moment, it is meaningful that the introduction of the Research Official who assists the Judges probing the cases fair and square. In this Paper, with the consideration of the several kinds of Research Official System, such as the Research Official of the Korean Supreme Court, the Supreme Public Prosecutors' Office and the Constitutional Court, Japanese Supreme Court, Law Clerk in USA, etc., the selection, numbers, duty of the Research Official were studied. The results of the study are as follows; 1. The Research Official to be appointed among the person having long enough career as a Judge, Investigator engaged in the Maritime Safety Tribunal due to he sho띨d have capability to confirm perfectly logical judgement and to collect enough material for the conclusion of the causes of the case. The one who understands the foreign language is preferred for the study of the foreign cases; 2. It will be logical to post 3 joint Research Officials in Korea Maritime Safety Tribunal in Seoul after due consideration the cases treated a year; 3. It will be logical for the Research Official to perform the collection of material and inspection of the scene for the trial and inquiry of the cases, to attend the cases filed suit to the Supreme Court, to make commentarial papers regarding the judged cases, to collect statistics of marine accidents and to devise a reform measure through in-depth analysis of the accidents frequently occurred, to study for the improvement of the Maritime Accident Inquiry System;

• Journal of the Korea Safety Management & Science
• /
• v.17 no.4
• /
• pp.135-141
• /
• 2015

According to the statistics, occupational fatal injuries by mobile cranes were about 12 per year in whole industrial. Mobile cranes are widely used in various parts of industries to improve the efficiency of the work. However considerable number of fatal injuries happen each year during the operation of the machines. In this study, the current regulations to be adequate in industrial site have to be renew in order to prevent the fatal injuries by mobile cranes. Fatal injury analyses were conducted with several accident cases by the mobile cranes. For each accident, the causes of the injuries were examined and proper safety measures were proposed. In this study, the mobile crane showed a high fatality rate in industrial accidents and no detailed cause analysis of fatal accidents was conducted in terms of unsafe acts or conditions. This study proposed a revision of the standard guideline as an accident prevention measures through in-depth analysis of fatal accidents. First, among the mainly five machines caused the accidents, mobile crane was higher for the second showed 0.6% for number of fatalities compared to number of mobil cranes and for the third showed 11% for number of fatalities compared to number of injuries. Second, main cause of cognitive engineering agenda was visibility, responsibility, affordance. As the measures to prevent accidents before starting operation, alternative revision for the fool proof including visibility, responsibility, affordance etc. for the fool proof measures was proposed. Third, alternative revision as cognitive accident prevention for the fail safe measures was proposed.