• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.3
• /
• pp.278-284
• /
• 2016

Software reliability in the software development process is an important issue. In infinite failure NHPP software reliability models, the fault occurrence rates may have constant, monotonic increasing or monotonic decreasing pattern. In this paper, infinite failures NHPP models that the situation was reflected for the fault occurs in the repair time, were presented about comparing property. Commonly, the software model of the infinite failures using the linear hazard rate distribution software reliability based on intercept parameter was used in business economics and actuarial modeling, was presented for comparison problem. The result is that a relatively large intercept parameter was appeared effectively form. The parameters estimation using maximum likelihood estimation was conducted and model selection was performed using the mean square error and the coefficient of determination. The linear hazard rate distribution model is also efficient in terms of reliability because it (the coefficient of determination is 90% or more) in the field of the conventional model can be used as an alternative model could be confirmed. From this paper, the software developers have to consider intercept parameter of life distribution by prior knowledge of the software to identify failure modes which can be able to help.

• The Journal of Engineering Research
• /
• v.6 no.2
• /
• pp.11-22
• /
• 2004

A distributed constraint satisfaction problem (distributed CSP) is a constraint satisfaction problem(CSP) in which variables and constraints are distributed among multiple automated agents. ACSP is a problem to find a consistent assignment of values to variables. Even though the definition of a CSP is very simple, a surprisingly wide variety of AI problems can be formalized as CSPs. Similarly, various application problems in DAI (Distributed AI) that are concerned with finding a consistent combination of agent actions can be formalized as distributed CAPs. In recent years, many new backtracking algorithms for solving distributed CSPs have been proposed. But most of all, they have common drawbacks that the algorithm assumes the priority of agents is static. In this thesis, we establish a basic algorithm for solving distributed CSPs called dynamic priority search algorithm that is more efficient than common backtracking algorithms in which the priority order is static. In this algorithm, agents act asynchronously and concurrently based on their local knowledge without any global control, and have a flexible organization, in which the hierarchical order is changed dynamically, while the completeness of the algorithm is guaranteed. And we showed that the dynamic priority search algorithm can solve various problems, such as the distributed 200-queens problem, the distributed graph-coloring problem that common backtracking algorithm fails to solve within a reasonable amount of time. The experimental results on example problems show that this algorithm is by far more efficient than the backtracking algorithm, in which the priority order is static. The priority order represents a hierarchy of agent authority, i.e., the priority of decision-making. Therefore, these results imply that a flexible agent organization, in which the hierarchical order is changed dynamically, actually performs better than an organization in which the hierarchical order is static and rigid. Furthermore, we describe that the agent can be available to hold multiple variables in the searching scheme.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.11
• /
• pp.87-104
• /
• 2015

Currently the IoT (Internet of Things) environments and related technologies are being developed rapidly through the networks for connecting many intelligent objects. The IoT is providing artificial intelligent services combined with context recognition based knowledge and communication methods between human and objects and objects to objects. With the help of IoT technology, many research works are being developed using the C-ITS (Cooperative Intelligent Transport System) which uses road infrastructure and traveling vehicles as traffic control infrastructures and resources for improving and increasing driver's convenience and safety through two way communication such as bus-only lane and license plate recognition and road accidents, works ahead reports, which are eventually for advancing traffic effectiveness. In this paper, a system for deciding whether the traveling vehicle is possible or not to drive on bus-only lane in highway is researched using the lane and number plate recognition on the road in C-ITS traffic infrastructure environments. The number plates of vehicles on the straight ahead and sides are identified after the location of bus-only lane is discovered through the lane recognition method. Research results and experimental outcomes are presented which are supposed to be used by traffic management infrastructure and controlling system in future.

• Fire Science and Engineering
• /
• v.33 no.1
• /
• pp.147-155
• /
• 2019

This study was a quasi-experimental research of a non-equivalent control group and non-synchronized design for analyzing the effects of fire safety education on care worker trainees. The subjects of the study were care worker trainees of the S Care Worker Institution: 57 trainees with 28 in the experimental group, and 29 in the control group. The research period was from May 21 to June 14, 2018 and the experiments focusing on fire safety education were performed once per week for a total of four times over the research period. The data were then analyzed using a ${\chi}^2-test$ and t-test. The results showed that fire safety education is an effective source of education for increasing the knowledge on fire safety, attitudes towards fire safety, perceived behavioral control on fire safety, behavioral intention on fire safety, and fire safety behavior in addition to being incredibly useful in practicing fire safety behaviors throughout their daily lives. On the other hand, the subjective norms on fire safety did not show any significant differences. Therefore, this paper suggests a follow-up study that should focus on analyzing the effects of the subjective norms on fire safety.

• Journal of The Korean Association For Science Education
• /
• v.38 no.6
• /
• pp.781-792
• /
• 2018

In modern society, as technology develops and industry diversifies, students can choose from a variety of career paths. Since science, technology, engineering, and mathematics require a longer education and experience than other fields, it is important to design science education policies based on the competencies required for science, technology, engineering, and mathematics (STEM) occupations. This study explores the definition of science and technology manpower and STEM occupations and identifies core competencies of STEM occupations using standard job information operated and maintained by the US Department of Labor ($O^*NET$). We specially analyzed ratings of the importance of skills (35 ratings), knowledge (33 ratings), and work activities (41 ratings) conducting descriptive analysis and principal component analysis (PCA). As a result, core competencies of STEM occupations consist of STEM problem-solving competency, Management competency, Technical competency, Social service competency, Teaching competency, Design competency, Bio-chemistry competency, and Public service competency, which accounts for 70% of the total variance. This study can be a reference for setting the curriculum and educational goals in secondary and college education by showing the diversity of science and technology occupations and the competencies required for STEM occupations.

• Journal of Life Science
• /
• v.31 no.6
• /
• pp.587-594
• /
• 2021

By 2050, 70% more food will be needed to fulfill the demands of a growing population. Among the solutions, cultured meat or clean meat is presented as a sustainable alternative for consumers. Scientists have begun to leverage knowledge and tools accumulated in the fields of stem cell and tissue engineering in efforts aimed at the development of cell-based meat. Cultured meat has to recreate the complex structure of livestock muscles with a few cells. Cells start to divide after they are cultured in a culture medium, which provides nutrients, hormones, and growth factors. An initial problem with this type of culture is the serum used, as in vitro meat aims to be slaughter free. Thus, it is contradictory to use a medium made from the blood of dead calves. The serum is expensive and affects to a large extent the production cost of the meat. A positive aspect related to the safety of cultured meat is that it is not produced from animals raised in confined spaces and slaughtered in inhumane conditions. Thus, the risk of an outbreak is eliminated, and there is no need for vaccinations and animal welfare issues. The production of cultured meat is presented as environmentally friendly, as it is supposed to produce less greenhouse gas, consume less water, and use less land in comparison to conventional meat production.

• Journal of Practical Engineering Education
• /
• v.15 no.3
• /
• pp.539-547
• /
• 2023

In recent years, university education has emphasized a learner-centered education model with a change in educational paradigm. This study aims to explore students' diverse opinions and improve the quality of education by analyzing the open-ended responses of university lecture evaluations using topic modeling. To this end, a total of 45,001 open-ended responses based on the results of lecture evaluations from 2017 to 2022 in non-metropolitan universities were divided into majors and liberal arts, and a short-form optimized Biterm Topic Modeling (BTM) analysis was conducted. As a result of the analysis, major lectures were divided into "attitude toward non-face-to-face classroom experience", "attitude toward questions and discussions", "attitude toward attendance and grading", "attitude toward practical activities and presentations", and "attitude toward communication and collaboration", while liberal arts lectures were divided into "attitude toward non-face-to-face classroom experience", "attitude toward grades and evaluations", "attitude toward attendance and syllabus", "attitude toward academic knowledge and interest", and "attitude toward communication and questions". The results of this study, which analyzed various feedback from students, provide insights that can be used to compare the characteristics of majors and liberal arts courses and improve teaching and learning experiences.

• Journal of Practical Engineering Education
• /
• v.16 no.4
• /
• pp.529-540
• /
• 2024

In industrial sites, experiential virtual training contents are partially used to replace high-risk and high-cost training, and virtual training contents development is also becoming active along with the increasing demand for non-face-to-face industries. Existing studies mainly focused on quantitative research through surveys, and only measured the change in users' learning commitment. This study attempted to investigate the effect of the combination of theoretical education and virtual training on the improvement of actual job performance in a dual vocational training environment by conducting an experimental study. This study studied whether the combination of theoretical education and virtual training can improve the performance of vocational training in dual vocational training (comparative work and learning) in which companies and schools participate. The results of pre- and post-evaluation of vocational training using traditional vocational training and virtual training contents were compared with 24 vocational training trainees. As a result of the study, it was demonstrated that the outcome of virtual training education was higher than that of traditional vocational training, and the combination of virtual reality-based education was more effective in theoretical education. This study suggests that the virtual training content presents a new paradigm for industrial safety education, and through the interview results of trainees, it was confirmed that virtual training can lead to a change in attitude toward safety beyond just knowledge transfer. This contributes to the prevention of safety accidents in industrial sites and provides important implications for improving the quality of vocational training.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.16 no.3
• /
• pp.147-154
• /
• 2011

Decision making in Environmental Impact Assessment (EIA) and Consultation on the Coastal Area Utilization (CCAU) is footing on the survey reports, thus requires concrete and accurate information on the natural habitats. In spite of the importance of reporting the ecological quality and status of habitats, the accumulated knowledge and recent techniques in ecology such as the use of investigated cases and indicators/indices have not been utilized in evaluation processes. Even the EIA report does not contain sufficient information required in a decision making process for conservation and development. In addition, for CCAU, sampling efforts were so limited that only two or a few stations were set in most study cases. This hampers transferring key ecological information to both specialist review and decision making processes. Hence, setting the effective number of sampling stations can be said as a prior step for better assessment. We introduced a few statistical techniques to determine the number of sampling stations in macrobenthos surveys. However, the application of the techniques requires a preliminary study that cannot be performed under the current assessment frame. An analysis of the spatial configuration of sampling stations from 19 previous studies was carried out as an alternative approach, based on the assumption that those configurations reported in scientific journal contribute to successful understanding of the ecological phenomena. The distance between stations and number of sampling stations in a $4{\times}4$ km unit area were calculated, and the medians of each parameter were 2.3 km, and 3, respectively. For each study, approximated survey area (ASA, $km^2$) was obtained by using the number of sampling stations in a unit area (NSSU) and total number of sampling stations (TNSS). To predict either appropriate ASA or NSSU/TNSS, we found and suggested statistically significant functional relationship among ASA, survey purpose and NSSU. This empirical approach will contribute to increasing sampling effort in a field survey and communicating with reasonable data and information in EIA and CCAU.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.3
• /
• pp.144-179
• /
• 2010

Investigation into iron manufacture relics has been active since 1970s, especially accelerated in 1990s across the country. Consideration of the importance of production site relics has lately attracted attention to iron manufacture relics. Methodological studies of the investigation into iron manufacture relics, however, were less made compared with those of the investigation into tomb, dwelling, or swampy place relics. It is because the process of iron manufacture is too complicated to understand and also requires professional knowledge of metal engineering. With the recognition of these problems this research is to form an opinion about how to excavate, to rearrange and classify, and to examine iron manufacture relics, based upon the understanding of the nature of iron, iron production process, and metal engineering features of related relics like slag, iron lumps and so on. This research classifies iron manufacture relics into seven types according to the production process; mining, smelting, refining, tempering, melting, steelmaking, and the others. Then it arranges methods to survey in each stage of field study, trial digging, and excavation. It also explains how to classify and examine excavated relics, what field of natural science to be used to know the features of relics, and what efforts have been made to reconstruct a furnace and what their problems were, making the best use of examples, drawings, and photos. It comes to the conclusion, in spite of the lack of in-depth discussion on application and development of various investigation methods, that iron manufacture relics can be classified according to the production process, that natural sciences should be applied to get comprehensive understanding of relics as well as archeological knowledge, and that efforts to reconstruct a furnace should be continued from the aspect of experimental archeology.