• 제목/요약/키워드: Knocking limit

검색결과 7건 처리시간 0.021초

알코올을 보조적으로 사용한 직접분사식 디젤기관의 성능에 관한 고찰 (Some Considerations for Performance of D.I. Diesel Engine Using Auxiliary Fuel Such as Alcohol)

  • 이형곤;방중철
    • 한국자동차공학회논문집
    • /
    • 제10권3호
    • /
    • pp.28-35
    • /
    • 2002
  • The objective of this paper is to quantitatively investigate the effects of alcohol mixture on the combustion improvement of main fuel in supplying alcohol to direct injection diesel engine by auxiliary injection method and blend method. If alcohol is supplied, engine performance greatly improves in high load range. In case of supplying ethanol, BSFC improves, the emission of smoke and NO decreases by delaying main fuel injection timing 5$\^{C}$A. The maximum delivery quantity of alcohol is limited to approximately 50% of total fuel delivery due to misfire and knocking. The limit quantity of main fuel injection that does not accompany misfire and the deterioration of BSFC was approximately 15∼18.5mg/st.

HCNG 엔진의 공기과잉율 변화에 따른 노킹 특성에 관한 연구 (A Study on the Knocking Characteristics with Various Excess Air Ratio in a HCNG Engine)

  • 임기훈;박철웅;이성원;최영;김창기;이장희
    • 한국가스학회지
    • /
    • 제17권1호
    • /
    • pp.7-12
    • /
    • 2013
  • 자동차 배기가스 규제가 강화됨에 따라 천연가스에 수소를 첨가하는 수소-천연가스 혼합연료(HCNG)를 기존의 압축천연가스(CNG) 엔진에 적용하려는 많은 연구들이 진행되고 있다. 그러나 수소의 높은 연소 속도로 인한 역화, 조기착화, 노킹(knocking) 등의 이상연소 발생 가능성은 엔진의 가열 또는 열효율 및 출력의 저하를 야기하는 문제점이 발생할 수 있다. 본 연구에서는 CNG 연료에 수소를 일정 부분 혼합한 HCNG 연료를 기존의 CNG 엔진에 적용하여 희박연소 한계 확장을 통해 연소 성능 개선을 확인하고, CNG와 HCNG 연료의 노킹 특성을 파악하고자 하였다. 공기과잉율의 변화에 따른 노킹 발생 조건을 관찰함으로써 HCNG 연료의 적용성 및 노킹마진을 평가하고자 하였다. HCNG 연료 사용 시 최적운전조건에서 노킹 문제없이 엔진을 운전할 수 있었으나 노킹이 일어날 수 있는 가능성이 높아져 이에 대한 대비가 필요할 것으로 판단된다.

가솔린 예혼합 압축 착화 엔진의 농후 한계에서 연소와 노킹 특성 (Knocking and Combustion Characteristics at Rich Limit of Gasoline HCCI Engine)

  • 염기태;장진영;배충식
    • 한국자동차공학회논문집
    • /
    • 제14권6호
    • /
    • pp.9-16
    • /
    • 2006
  • Variable valve timing is one of the attractive ways to control homogeneous charge compression ignition (HCCI) engine. Hot internal residual gas which can be controlled by variable valve timing(VVT) device, makes fuel evaporated easily, and ignition timing advanced. Regular gasoline was used as main fuel and di-methyl ether(DME) was used as ignition promoter in this research. HCCI engine operating range is limited by high combustion peak pressure and engine noise. High combustion pressure can damage the engine during operation. To avoid engine damage, the rich limits have to define using various methods. Peak combustion pressure, rate of cylinder pressure rise was considered to determine rich limit of engine operating range. Knock probability was correlated with the rate of cylinder pressure rise as well as the peak combustion pressure.

CNG Dual Fuel 디젤기관의 성능과 배출가스 개선을 위한 수소혼합 실험 (Experimental Study to Improve the Performance and Emission of CNG Dual Fuel Diesel Engine Mixed with Hydrogen)

  • 김복석
    • 에너지공학
    • /
    • 제9권2호
    • /
    • pp.83-88
    • /
    • 2000
  • In this study, the performance and pollutant emission of CNG engine using diesel oil as a source of ignition, so called CNG dual fuel diesel engine is considered by experiment. One of the unsolved problems of the natural gas dual fuel engine is that there is too much exhaust of total hydrocarbon (THC) at a low equivalent mixture ratio. To fix it, a natural gas mixed with hydrogen was applied to engine test. The results showed that the higher the mixture ratio of hydrogen to natural gas, the higher the combustion efficiency. and when the amount of the intake air is reached to 90% of WOT, the combustion efficiency was promoted. But, like a case making the injection timing earlier, the equivalent mixture ratio for the knocking limit decrease and the produce of NOx increases.

  • PDF

인돌렌-메탄올 대체연료의 연료 특성과 엔진성능에 관한 연구 (A Study on the Fuel Characteristics and Engine Performance of Indolene - Methanol Alternative Fuel)

  • 이민호;오율권;차경옥
    • 한국분무공학회지
    • /
    • 제9권4호
    • /
    • pp.9-16
    • /
    • 2004
  • A study of the propeny and performance effect of Indolene - Methanol Plus High Alcolhols (MPHA) has been completed. This study invested the measurement of fuel properties and performance parameters. The fuel properties investigated are distillation characteristics, heating valuer flash point, specific gravity and water tolerance. The performance parameters measured are minimum advance for best torque (MBT) spark timing, power output. The alcohol concentration was varied from 0 to 100 percent by volume in clear Indolene. The measurement of fuel properties indicated that, in general, Indolene - MPHA blends have higher water tolerance, similar specific gravity, similar flash point and different distillation characteristics compared to Indolene - Methanol blends. The performance parameters were measured using a single cylinder spark ignition engine at different compression ratios. The results of the performance measurements indicated that Indolene - MPHA blends have a higher MBT spark advance, similar power output.

  • PDF

小型 디이젤機關에 있어서 알코올 利용에 관한 硏究

  • 노상순;허병무
    • 대한기계학회논문집
    • /
    • 제11권3호
    • /
    • pp.386-394
    • /
    • 1987
  • 본 연구에서는 우수한 출력성능 때문에 광범위한 범위에서 사용되고 있는 디 이젤기관을 그 대상으로 하여 실요상 보다 간편하고 액체연료만이 아니고 기체연료의 사용도 가능한 기화디이젤법, 즉 추연료로서 알코올을 흡기관으로부터 흡입시키는 한 편, 연소실내에 착화원으로서 경유를 분사시켜 알코올의 연소를 확보하도록 하는 방법 을 이용하여 기관의 연소성, 출력성능, 또는 배기특성 등에 대하여, 조사분석하여 알 코올이 대체연로로서의 이용가능성을 확고히 하고져 함에 그 목적이 있다.

고압축비 전기점화 천연가스 발전용 엔진에서 앳킨슨 사이클 적용을 통한 열효율 향상 (Improvement of Thermal Efficiency using Atkinson Cycle in a High-Compression Ratio, Spark-Ignition, Natural Gas Engine for Power Generation)

  • 이준순;박현욱;오승묵;김창업;이용규;강건용
    • 한국분무공학회지
    • /
    • 제28권2호
    • /
    • pp.55-61
    • /
    • 2023
  • Natural gas is a high-octane fuel that is effective in controlling knocking combustion. In addition, as a low-carbon fuel with a high hydrogen-carbon ratio, it emits less carbon dioxide and almost no particulate matter compared to conventional fossil fuels. Stoichiometric combustion engines equipped with a three-way catalyst are useful in various fields such as transportation and power generation because of their excellent exhaust emission reduction performance. However, stoichiometric combustion engines have a disadvantage of lower thermal efficiency compared to lean combustion engines. In this study, a combination of high compression ratio and Atkinson cycle was implemented in a 11 liter, 6-cylinder, spark-ignition engine to improve the thermal efficiency of the stoichiometric engine. As a result, pumping and friction losses were reduced and the operating range was extended with optimized Atkinson camshaft. Based on the exhaust gas limit temperature of 730℃, the maximum load and thermal efficiency were improved to BMEP 0.66 MPa and BTE 35.7% respectively.