• Journal of Korean Medicine Rehabilitation
• /
• v.27 no.3
• /
• pp.125-136
• /
• 2017

Objectives The present study was designed to analyze the posture pattern of healthy right-handed male and to investigate the effect of Chuna treatment. Methods Twenty healthy right-handed male were selected in this study. Body posture was measured by Body $Style^{(R)}$. After that, subjects received Chuna treatment on lumbar and pelvis area. Finally, the 2nd measurement was carried out. Results In shoulder height, left shoulder was higher than right one. In pelvic height, right iliac crest was higher than left, followed by longer right leg than left. In lower limb angle suggesting valgus or varus knee. In height of scapula inferior angle, right seemed higher than left. After the Chuna treatment, shoulder height, pelvic height, and leg length difference showed significant improvement. Other variables showed improvement but it was not significant. Conclusions These results suggest that right-handed male have some characteristic posture pattern because of their daily life habits, and Chuna treatment can be effective in correcting bad posture.

• Journal of the Korean Society of Safety
• /
• v.24 no.2
• /
• pp.83-88
• /
• 2009

The objective of this paper was to evaluate the effectiveness of horizontal, vertical, asymmetric and coupling multipliers for manual material handling. Lifting tasks with 5 different horizontal distances ($30{\sim}70cm$) for 6 vertical distances(ankle, knee, waist, elbow, shoulder and head height) were experimented. The muscle activity and muscle exertion level during asymmetric load handling(without trunk flexion) was experimented. Lifting tasks with and without handle tote box for three postures(straight, bending, right angle posture) were experimented. The degrading tendency did not appeared almost in $60{\sim}70cm$ interval's horizontal distance. As a result of ANOVA, MVC paid attention to horizontal and vertical distance but cross effect was insignificant(p<0.01). The change of the MVC according to the horizontal, vertical distance appeared similar from of RWL. The results of normalized MVC measurement were decreased about 16%, 24%, 34% respectively as the asymmetry angle was $30^{\circ}$, $60^{\circ}$, $90^{\circ}$. RMS EMG values of right erector spinae muscles were decreased as the work posture went to $90^{\circ}$ and those of left erector spinae muscles were increased until the asymmetry angle was $40^{\circ}$ but decreased continually over $40^{\circ}$. 7 subjects, activities of left and right latissimus dorsi muscles were maintained constantly, while for remainer, those were irregular. MVC reduced maximum 23% by type of handle. MVC was highest in straight posture, but was lowest in right angle posture. As a result of ANOVA, MVC paid attention to posture, coupling(p<0.01). To all handle types, biceps brachii activity was increased in right angle posture, but reduced in straight posture. Based on the results of this study, it is suggested that the NIOSH guideline should not be directly applied to Korean without reasonable reexamination. In addition, we need to afterward study through an age classification.

• Fashion & Textile Research Journal
• /
• v.22 no.5
• /
• pp.595-606
• /
• 2020

This study develops an optimal two-dimensional (2D) pattern from three-dimensional human scan data by considering the cycling posture and dermatome of high school male cyclists. By analyzing the body surface change in the cycling posture and considering the dermatome of the lower limbs, the optimal cutting line setting and the development of cycling tights for individual cyclists were presented to provide data that could be used in the clothing industry. We designed three cycling tights to solve the size unsuitability. 3D design 1 is a non-extension design based on the analysis of the 3D human body scan data, in which parts were connected diagonally from the front of the knee to the back of the knee. 3D design 2 removed both the front and back to reduce air resistance during cycling. 3D design 3 did not have a cutting line on the front panel because of the air resistance during cycling in the front area. We analyzed the garment pressure for 8 points of lower body and performed a subjective evaluation of the 3D designed tights and the current cycling tights. The 3D design 1 in this study was well received in the omphalion, thigh, and hip area, while 3D design 3 was well received in the omphalion, thigh, hip, and bottom bands. Therefore, the LoNE of 3D design 1 was applied to the front, and the hip cutting line of 3D design 3 was applied to the back.

• Journal of The Korean Society of Integrative Medicine
• /
• v.8 no.2
• /
• pp.97-107
• /
• 2020

Purpose : The purpose of this study is to investigate the effect of squat exercise using a ball on the gap between knees and Q angle of a subject with a genu-varum, and to prove the effect, to provide a clinical basis for developing into a knee correction exercise program. Methods : As a result of posture measurement through GPS, 26 female with genu-varum with a knee length of 5 cm or more were studied. The group was randomly assigned to 13 squat exercise group using ball (experimental group) and 13 general squat exercise groups (control group). The experimental group placed the ball between both knees in a position where the distance between both feet was slightly wider than the shoulder width on a flat support surface, and fixed the ball, and then squat with the start signal. The control group squats without a ball. Each group performed three sets of exercise three times a week for six weeks. Before their exercise, after three and six weeks, EMG, GPS, digital goniometer measurement, the vastus medialis (VM), the vastus lateralis (VL), and the Q-angle were measured in the squat exercise posture. EMG was measured in squat exercise posture. Results : The distance between the knees was reduced. EMG is activated in group A, the group B experimental results showed the high activity of the VL. Q-angle had increased. But the experimental group increased more than the control group. Conclusion : We have confirmed through our experiments that the distance interval between the knees during squat exercises using a ball can be reduced. Furthermore, it would also be helpful to ensure the treatment of genu-varum.

• Journal of The Korean Society of Integrative Medicine
• /
• v.6 no.2
• /
• pp.99-106
• /
• 2018

Purpose : Various studies effects of mental practice. However, there is a lack of research on the effects of practice on postural alignment. Therefore this study to the effect of ankle exercise combined with mental practice on postural alignment of legs. Method : Subjects were randomly assigned to mental practice group (experimental group n=15) and general exercise group (control group n=15). Postural alignment was the hip, knee, and ankle joints. When viewed from the side, an arbitrary point in front of the malleolus makes a straight line with the plumb line. Exercise was performed a week for weeks. Exercise programs included muscle strengthening, relaxation, and proprioception exercise. The experimental group mental practice. Result : Both groups showed significant differences in postural alignment ankle joint, knee joint, and hip joint. In particular, the experimental group showed a larger change than the control group. However, significant difference in postural alignment change only the knee joint (p<0.05), and there was no significant difference the hip joint (experimental group=$0.77{\pm}0.81$, control group=$0.87{\pm}1.13$) and ankle joint (experimental group=$0.52{\pm}0.63$, control group=$0.48{\pm}0.41$). Conclusion : This study suggests that mental practice is effective as an exercise method postural alignment. Mental practice also expected to be musculoskeletal disorders. Therefore, additional studies should be conducted to verify the effect of mental practice on the alignment of various parts.

• The Journal of Korean Physical Therapy
• /
• v.33 no.3
• /
• pp.168-177
• /
• 2021

Purpose: This study applies the ICF to identify the patient's body function, structure, and participation, evaluates the patient's environmental factors and individual factors, and is a high level of movement to return to the society of patients with multiple ligament injury of the knee joint. Methods: Progressive strength training and ROM exercise were performed 30 minutes a day, 5 times a week for 6 weeks. The evaluation was performed by examining the ROM, length, MMT, instability, dynamic balance, pain and depression. Results: The ROM of the knee joint was improved from 110° to 135° after intervention, and the knee flexion length decreased from 69 cm to 45 cm. Knee flexor is Good after intervention from Poor-, and knee extensor is Good+ after intervention from Poor, and the plantar flexor of the ankle joint improved from Poor- before intervention to Good after intervention and dorsi-flexor of the ankle joint improve to Good from Poor. Pain index was moderate before and after the intervention, with a score of 3, 2 after the intervention, and when maintaining the sitting cross-legged, the before intervention score was 7 to 4 after the intervention. Conclusion: The patient's posture of sitting cross-legged was maintained from 30 seconds before intervention to 14 minutes after intervention. These results were able to set the hypothesis design, intervention method and goal that the multifaceted approach of environment and individual factors as well as body function and structure area, activity and participation area using ICF checklists, it is helped the patient to return to daily life.

• Physical Therapy Korea
• /
• v.29 no.2
• /
• pp.117-123
• /
• 2022

Background: Push-up are effective exercises for shoulder stability. Previous studies have documented the effects of support plane and hand position and width on muscle activities during a push-up. Objects: This study aimed to investigate the changes in muscle activities in the upper extremity when performing the standard and the knee-flexed push-up with different hand shapes. Methods: A total of twenty-six healthy males participated in this study. Three different hand shapes (finger abduction, finger adduction, and fists) and two types of push-up posture (standard and knee-flexed push-up) were set as the independent variables. Electrograms were used to measure the muscle activity of the upper trapezius (UT), triceps brachii (TB), pectoralis major (PM), and serratus anterior (SA). Each participant performed the randomly assigned push-up to the sound of the metronome. The mixed-effect linear regression model was used to detect the changes in muscle activities after changing the hand shape and push-up posture. Statistical significance was set at α = 0.05. Results: The UT muscle activity was statistically significantly higher when performing push-up with fists than finger abduction (p = 0.035) or finger adduction (p = 0.044). During the standard push-up, the muscle activity in all muscles was that the push-up with fists showed the highest muscle activity compared to the finger abduction (p < 0.01) and finger adduction (p < 0.01). Regardless of the shape of the hand, UT had the lowest muscle activity compared to other muscles (p < 0.001). In contrast, the SA muscle had the highest muscle activity among four muscles during the standard push-up. Conclusion: Based on the results of this study, we suggest hand shape is related to the difficulty level of push-up either in the standard or the knee-flexed push-up, especially in the push-up with fists. In addition, knee push-up can be recommended as shoulder muscle-strengthening exercises for individuals with low shoulder muscle strength.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.2
• /
• pp.51-62
• /
• 2006

In assessing risks related to working posture, pictures of postures are taken from various directions, which can be a source of observation error. Joint postures of the neck, lower back, knee, shoulder, and elbow were taken from 7 different viewing angles and 19 observers estimated joint angles by observing the pictures in 2-dimensional display. The joint angles were also measured using an optoelectronic motion measurement system. The estimation error increased as the viewing angle varies from the right side of the human body, but the patterns differ according to which joint angles were being observed. Guidelines to increase the validity of observation of joint angles were presented based on the results. In general, it is recommended to maintain the viewing angle within 20 degrees from the right side of the human body, while different ranges of viewing angle are recommended for each joint angle.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.2
• /
• pp.11-22
• /
• 2012

The purpose of this study was to compare drivers' postures with different car pedal systems and skilled levels. Fourteen subjects participated in this experiment and for three-dimensional analyses, six cameras (Proreflex MCU-240, Qualisys) were used to acquire raw data. The parameters were calculated and analyzed with Visual-3D. In conclusion, the patterns of pelvic, hip, knee and ankle joint angles were different as to pedal systems and skilled levels, and distal joints ROA pelvis have large angles. ROA(range of angle) of a double pedal system was small, but ROA of a single pedal system was large. These findings suggested that we should improve a present single pedal system.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.9
• /
• pp.1147-1153
• /
• 1999

The attitude control of a double inverted pendulum with a periodical disturbance at link top is dealt in this paper. The proposed system is consisted of the double inverted pendulum and a disturbing link; a triple inverted pendulum with two motors. The lower link is hinged on the plate to free for rotation in the vertical plane. The upper link is connected to the lower link through a DC motor. The DC motor is used to control the posture of the pendulum by adjusting the position of the upper link. The periodical disturbance can be generated by the additional like attached at the end of link 2 through another DC motor, which is the modeling of a posture for a biped supporting with one leg. The motor for the joint simulates the knee joint(or hip joint) and the disturbance for the legs moving in air. The algorithm for controlling the proposed inverted pendulum which is regarded as a virtual double inverted pendulum with a periodic disturbance, is consisted of a state feedback control and a fuzzy logic controller connected in parallel. The fuzzy controller keeps the center of gravity of the biped within the specified range through the nonlinear feedback compensator. The state feedback control takes over the role to maintain a desired posture regardless the disturbance at the link top. Simulations with a mathematical model and experiments are conducted to show the validity of the proposed controller.