• PNF and Movement
• /
• 제19권1호
• /
• pp.79-86
• /
• 2021

Purpose: The purpose of this study was to investigate muscle activity according to knee flexion angle during single-limb-deadlift exercises. Methods: In total, 26 healthy volunteers participated. The single-limb-deadlift consisted of 0˚, 15˚, and 30˚ knee joint bending. The electromyography data were collected from the semitendinosus (SM), the biceps femoris (BF), the rectus femoris (RF), the vastus lateralis (VL), and the vastus medialis (VM). In addition, hamstrings and quadriceps (HQ) ratio was measured during the single-limb-deadlift using electromyography. Results: During the single-limb-deadlift, RF, VL, and VM were significantly higher at 30˚ bending angles compared to muscle activity of 0˚ and 15˚ knee-joint bending. The HQ ratio had significant differences in all three knee joint bending angles. In particular, the single-limb-deadlift carried out to a 30˚ knee-joint bend showed the closest value to 1. Conclusion: The most balanced coactivation ratios were observed during a single-limb-deadlift to a 30˚ knee-joint bend angle. A single-limb-deadlift at a knee-bend angle of less than 30˚ could be used as an exercise to prevent ACL injury. It could also be used for post-injury rehabilitation programs by increasing knee-joint stability.

• 한국운동역학회지
• /
• 제16권4호
• /
• pp.175-187
• /
• 2006

The purpose of this study was to find the relationship between Achilles tendon angle, angular velocity from 2D cinematography utilized to easily analyze the functions of shoes, ankle joint moment, knee joint moment, and hip joint moment from 3D cinematography utilized to predict the injury. Also, this study was to provide the optimal standard to analyze the injury related to the shoes. Subjects in this study were 30 university male students and 18 conditions (2 types of running speed, 3 of midsole hardness, 3 of midsole height) were measured using cinematography and force platform. The results were as following. 1) Hip joint abduction moment was effected by many variables such as running speed, midsole height, maximum achilles tendon angle, ground reaction force. 2) Knee joint rotational moment in running was approximately 1/10 - 1/4 times of the injury critical value and eversion moment was approximately 1/4 - 1/2 times of the injury critical value. 3) Ankle joint pronation moment in running was 1/3 - 1/2 times of the injury critical value. 4) Knee joint rotational moment was found to be irrelevant with maximum achilles tendon angle or angular velocity. 5) Pronation from running was thought to be relevant to rather eversion moment activity than rotational moment activity of knee joint. 6) Plantar flexion abductor of ankle showed significant relationship with the ground reaction force variable. 7) When the loading rate for ground reaction force in passive region increased, extensor tended to be exposed to the injury. Main variables in biomechanical analysis of shoes were impact absorption and pronation. Among these variables, pronation factor was reported to be relevant with knee injury from long duration exercise. Achilles tendon angle factor was utilized frequently to evaluate this. However, as the results of this study showed, the relationship between these variables and injury relating variable of knee moment was so important. Studies without consideration on this finding should be reconsidered and reconfirmed.

• 한국운동역학회지
• /
• 제13권2호
• /
• pp.49-63
• /
• 2003

For this study, four male university Taekwondo players were randomly chosen, between the weight categories of 60Kg and 80Kg. Their side kicks (yeop chagi), which are part of foot techniques, were kinematically analyzed in terms of the time, angle, and angular velocity factors involved with the kicks through the three-dimensional imaging. The results of the analysis are as fellows. 1. Time factor The first phase(preparation) was 0.48sec on average, accounting for 60% of the entire time spent; the second phase(the minimum angle of the knee joint) was 0.21sec on average, taking up 26% of the whole time spent; and the third phase(hitting) was 0.11sec on average, representing 14% of the entire time spent. 2. Angle factor In the first phase(preparation), rotating their bodies along the long axis, the players bended their hip and knee joints a lot, by moving fast in the vertical and horizontal directions, in the second phase(the minimum angle of the knee joint), the players continued to extend their bodies along the vertical axis, while pronating their lower legs and bending their hip and knee joints a lot to reduce the radius of gyration, and in the third phase(hitting), they extended their knee joints greatly so that the angle movements of their lower bodies shifted to circle movements. 3. Angular velocity factor In the first phase(preparation), the angular velocity of the hip and knee joints increased. while moving horizontally and rotating the body along the long axis; in the second phase(the minimum angle of the knee joint), the angular velocity increased by bending the hip and knee joints fast to reduce the rotation radios; and in the third phase(hitting), the angular velocity was found to have increased, by rotating the body along the long axis to increase the angular velocity and shifting the angular momentum of the pronated knee joint to the circular momentum.

• Advances in biomechanics and applications
• /
• 제1권1호
• /
• pp.57-66
• /
• 2014

The purpose of the study was to investigate the kinematics between the double collar-tie and double underhook Thai Boxing clinching positions. Ten amateur mixed martial arts athletes executed six knee strikes for both clinching positions with their dominant limb directed towards a target. A standard two-dimensional video motion analysis was conducted, and the results showed a statistical significant difference at the hip joint angle and the angular acceleration of the knee and ankle. Within both clinching positions, there was a statistically significant correlation between the hip and knee joint angles, hip and knee angular velocities, and hip angular acceleration. Between both clinching positions, there was a statistically significant correlation at the knee joint angle, knee angular velocity, and hip angular acceleration. This study demonstrates the importance of the hip and knee joint movements in both clinching positions, which implies the applications of strength training and flexibility at these joints for sports performance and injury prevention. It is suggested that future studies analyzing the non-dominant leg are warranted to fully understand the Thai Boxing clinch.

• 한국전문물리치료학회지
• /
• 제30권2호
• /
• pp.110-119
• /
• 2023

Background: Osteoarthritis is a common condition with an increasing prevalence and is a common cause of disability. Osteoarthritic pain decreases the quality of life, and simple gait training is used to alleviate it. Knee osteoarthritis limits joint motion in the sagittal and lateral directions. Although many recent studies have activated orthotic research to increase knee joint stabilization, no study has used patellar tendon straps to treat knee osteoarthritis. Objects: This study aimed to determine the effects of patellar tendon straps on kinematic, mechanical, and electromyographic activation in patients with knee osteoarthritis. Methods: Patients with knee osteoarthritis were selected. After creating the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), leg length difference, Q-angle, and thumb side flexion angle of the foot were measured. Kinematic, kinetic, and muscle activation data during walking before and after wearing the orthosis were viewed. Results: After wearing the patellar tendon straps, hip adduction from the terminal stance phase, knee flexion from the terminal swing phase, and ankle plantar flexion angle increased during the pre-swing and initial swing phases. The cadence of spatiotemporal parameters and velocity increased, and step time, stride time, and foot force duration decreased. Conclusion: Based on the results of this study, the increase in plantar flexion after strap wearing is inferred by an increase due to neurological mechanisms, and adduction at the hip joint is inferred by an increase in adduction due to increased velocity. The increase in cadence and velocity and the decrease in gait speed and foot pressure duration may be due to joint stabilization. It can be inferred that joint stabilization is increased by wearing knee straps. Thus, wearing a patellar tendon strap during gait in patients with knee osteoarthritis influences kinematic changes in the sagittal plane of the joint.

• 한국전문물리치료학회지
• /
• 제14권3호
• /
• pp.23-31
• /
• 2007

The purpose of this study was to determine the influence of high-heeled shoes on walking of obese women as it was already proven an extrinsic factor of knee osteoarthritis in women with normal weight. In this study the aimed therefore in particular was to utilize high-heeled shoes in proving it's causal influence on knee osteoarthritis by measuring the angle and torque of the knee joint. Fifteen obese women (BMI>25 $kg/m^2$) were measured in their twenties. Each angle and torque of their knee joints during walking on 6.5 cm high-heeled shoes and with a bare feet, were compared with each other and analyzed with a 3D motion analysis system. There was no significant difference in walking speed, cadence and stride length between the two conditions. However, there was a significant increase in a double limb support time and the stance phase when walking on high-heeled shoes as when walking with bare feet. The peak knee flexion angle and peak knee varus torque was higher when walking on high-heeled shoes than with bare feet. On the contrary, the peak knee flexion angle in the swing phase was not statistically different. The prolongation of peak knee varus torque was also proven. There was a significant increase in peak knee varus torque in the initial and last stance phases during walking on high-heeled shoes as compared to walking on bare feet. Through the above results, it was proven that when obese women walked on high-heeled shoes, rather than with bare feet, peak knee flexor and varus torque increased along with the changes of the in knee joint angle. Therefore, the influence of high-heeled shoes might be a significant intrinsic factor in knee osteoarthritis of obese women.

• 대한임상전기생리학회지
• /
• 제11권1호
• /
• pp.39-44
• /
• 2013

Purpose : The purpose of present study is to evaluate the joint angles of legs in the standing posture for six patients with unilateral knee osteoarthritis. Methods : The participants underwent unilateral total knee replacement. A motion analysis was used to measure the joint angles of the hip, knee, and ankle. The measurements were taken before the surgery, one week and two weeks after the surgery. Both sides of the legs were evaluated. Results : This result showed that after a certain healing period, both hip joint angles showed a significant difference while there was no significant difference in the knee and ankle joint angles. After surgery, the angle of ankle dorsiflexion was smaller on the operated side than the opposite side compared to the pre-surgery measurements. Conclusion : After surgery, the asymmetry in a standing position left unchanged due to contracture of the knee joint and tightness in the hamstring muscle. Therefore, when physiotherapists plan an initial exercise programs for TKR patients, it is essential to apply adequate exercises which consider the contracture of the leg joints.

• 한국운동역학회지
• /
• 제24권1호
• /
• pp.67-74
• /
• 2014

This study researched into the left-right inclination of the rear foot at the lower limb joints, knee joint angle, angular velocity of the knee joint, angular acceleration and the max. Based on the analysis of kinematics according to the changes in the height of step box (6, 8, 10 inches) during step aerobics of female college students majoring in physical education. The findings of this study are as follows: Then angle of the knee joint decreased as the height of the step box increased the min. Angle was measured right before the right foot was on the step box, and the angle tended to decrease as the step box get heightened. The left-right inclination of the rearfoot angle according to the height of step box increased as the height increased. In the 'pull-up' stage during which the weight was loaded on the right foot the angle increased, while in the right foot stepping stage during which the right foot was on the ground, the left-right inclination of the rearfoot angle increased as the height of the step box increased. The angular velocity of the knee joint according to the height of step box started increasing when the right foot initially stepped on the step box and during the initial stepping section, the angular velocity decreased as the height of step box increased. The changes in angular acceleration of the knee joint according to the height of step box increased as the height of step box increased.

• 한국운동역학회지
• /
• 제28권2호
• /
• pp.143-149
• /
• 2018

Objective: This study aimed to investigate the influence of landing foot orientations on biomechanics of knee joint in order to identify vulnerable positions to non-contact knee injuries during single-legged landing. Method: Seventeen men (age: $20.5{\pm}1.1 years$, height: $175.2{\pm}6.4cm$, weight: $68.8{\pm}5.8kg$) performed single-leg drop landings repeatedly with three different landing foot orientations. They were defined as toe-in (TI) $30^{\circ}$ adduction, neutral (N, neutral), and toe-out (TO) $30^{\circ}$ abduction positions. Results: The downward phase time of TI was significantly shorter than those of N and TO. The flexion and valgus angle of N was greater than those of TI and TO at the moment of foot contact. At the instance of maximum knee flexion, N showed the largest flexion angle, and TO position had the largest varus and external rotation angles. Regarding ground reaction force (GRF) at the moment of foot contact, TO showed the forward GRF, while others showed the backward GRF. TI indicated significantly larger mediolateral GRF than others. As for the maximum knee joint force and joint moment, the main effect of different foot positions was not significant. Conclusion: TI and TO might be vulnerable positions to knee injuries because both conditions might induce combined loadings to knee joint. TI had the highest mediolateral GRF with a shortest foot contact time, and TO had induced a large external rotation angle during downward phase and the peak forward GRF at the moment of foot contact. Conclusively, N is the preferred landing foot orientation to prevent non-contact knee injuries.

• 한국운동역학회지
• /
• 제18권2호
• /
• pp.75-83
• /
• 2008

본 연구의 목적은 보행 속도의 차이에 따른 최대 관절 모멘트와 최대 모멘트 발생 시점의 관절 각도 상관관계를 규명하는데 있다. 8명의 $20{\sim}30$대 남성을 대상으로 보행 속도의 3가지 단계(1.5m/s, 1.8m/s, 2.1m/s)를 나누어 속도에 따른 보행을 실시하여 얻어진 결론은 다음과 같다. 1. 보행 속도가 증가함에 따라 무릎 최대 신전 모멘트는 증가하였고, 굴곡, 외전 모멘트는 큰 영향을 받지 않았다. 2. 최대 신전 모멘트가 발생하는 시점의 무릎 관절 각도는 굴곡의 움직임이 커졌으나, 다른 무릎 관절 각도에는 변화가 없었다. 3. 힙 최대 신전, 굴곡, 외전 모멘트는 증가하였다. 4. 최대 굴곡과 신전 모멘트가 발생하는 시점의 힙 관절 각도의 신전과 굴곡의 증가 현상을 보였으나, 최대 외전 모멘트가 발생하는 시점의 무릎 관절 각도에는 변화가 없었다. 5. 무릎 최대 신전, 굴곡, 외전 모멘트와 무릎 관절 각도를 least square method를 이용하여 적합도 검사를 실시한 결과 R2값이 높게 나타나 상관관계의 설명력이 높았다. 이렇게 근사된 곡선의 근사식은 보행 속도에 따른 무릎 관절의 평가 자료로 이용될 것으로 기대된다.