• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.5 s.23
• /
• pp.75-80
• /
• 2002

Depending upon geographical features and surrounding errors in the survey field, inaccurate positioning is inevitable in a kinematic DGPs survey. Therefore, a data inaccuracy detection algorithm and an interpolation algorithm are essential to meet the requirement of a digital map. In this study, GPS characteristics are taken into account to develop the data inaccuracy detection algorithm. Then, the data interpolation algothim is obtained, based on the feature type of the survey. A digital map for 20km of a rural highway is produced by the kinematic DGPS survey and the features of interests are lines associated with the road. Since the vertical variation of GPS data is relatively higher, the trimmed mean of vertical variation is used as criteria of the inaccuracy detection. Four cases of 0.5%, 1%, 2.5% and 5% trimmings have been experimented. Criteria of four cases are 69cm, 65cm, 61cm and 42cm, respectively. For the feature of a curved line, cublic spine interpolation is used to correct the inaccurate data. When the feature is more or less a straight line, the interpolation has been done by a linear polynomial. Difference between the actual distance and the interpolated distance are few centimeters in RMS.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.3
• /
• pp.133-142
• /
• 2005

The purpose of this study was to compare of the kinematic variables from takeoff preparation to takeoff used by long jumpers who recorded over 8meters in 2002 Busan Asian Game and 2003 Daegu Universiade and 2001 national championship. The kinematic characteristics from the last three stride to takeoff at the takeoff board were analyzed such as velocities, heights and angles. The conclusion were as follows; In order to record over 8meters the national long jumpers should have under 5cm height variation at the penultimate stride of the run-up. In the approach phase the horizontal velocity of the jumpers should reach to 10m/s in touchdown at takeoff board The vertical velocity must have 3.75m/s simultaneously in order to record 8meters. The jumpers need to continue talent of the horizontal velocity in touchdown at takeoff board and require jumping power of the takeoff leg at takeoff board The appropriate body variation range ratio between takeoff and touchdown should be 1.2 vs 1 and the trunk angle at touch down on the board should be close to the erect posture for higher body flight.

• Water for future
• /
• v.22 no.4
• /
• pp.453-461
• /
• 1989

The analytical diffusion model is first formulated and its characteristics are critically reviewed. The flood events during the 1986-1988 flood seasons i the IHP Pyungchang Representative Basin are routed by this model and are compared with those by the kinematic wave model. The results showed that the analytical diffusion model simulates the observed flood events much better than the analytical kinematic wave model. The present model is proven to be an excellent means of taking the backwater effect due to lateral inflow or down river stage variations into consideration in channel routing of flood flows. It also requires much less effort and computing time at a desired station compared to any other reliable flood routing methods.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.6
• /
• pp.609-616
• /
• 2011

In the study, we analyzed the collision characteristics of a so-called arch-type submarine cable protector by considering the changes in drop heights of a stock anchor and material models for concrete and steel reinforcing bars. We considered plastic kinematics model and Johnson-Holmquist Concrete model for the concrete and linear elastic model and plastic kinematics model for the reinforcing bars. The drop heights of 2-ton stock anchor were selected as 3, 5, and 8.83m, respectively. ANSYS, a finite element analysis program, was used for the collision analysis. To save computational time, we converted those drop heights into initial velocities by the principle of energy conservation. From the sensitivity of the material models on the drop height changes, it is shown that the collision response of the reinforcing bars is sensitive firstly on the steel models and secondly on the concrete models, while the collision response of the concrete is sensitive only on the concrete models.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.3834-3842
• /
• 2011

The purpose of this study is to analyze the kinematic characteristics of children with Down syndrome got congenitally joint laxity and muscle hypotonic. The subjects are boys with Down syndrome and don't have the other disabilities. We got three dimensional position data and then calculated spatiotemporal and kinematic variables during walking on treadmill used increasingly for gait analysis and training. In result, in order to overcome their gait instability due to their musculoskeletal characteristics they walked with hip, knee and ankle joints more flexed than the typical gait pattern, and on the propulsion phase they extend the lower limb joints less than the typical, result in propel the body less than. The reason is that the more is the propulsion by extending the joints, the greater is the reaction force from the ground on heel contact. This result is expected to be used to develop the training program for intensification of musculoskeletal system aim to improve the other musculoskeletal disabilities as well as Down syndrome.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.2
• /
• pp.33-42
• /
• 2006

It is important to analyze the characteristics of normal gait in clinical and biomechanical aspects. Although gait characteristics can be varied by anthropometric, racial and cultural factors, normal gait studies have been performed mostly for Western people. The present study conducted a gait analysis for Korean young adults and compared the gait characteristics with those of Western people for the establishment of Korean normal gait data. A total of thirty-two adults in twenties(20 males and 12 females) were participated in the gait experiment and their spatio-temporal and kinematic/kinetic gait characteristics were analyzed. The comparison of the gait characteristics between Korean and Western people, revealed that the stride length and walking speed of Korean were significantly smaller than those of Western people by 0.1~0.3m and 0.15~0.40m/s respectively. And the knee abduction moment of Korean was larger than that of Western people, while the other moments(such as hip flexion/extension moments, abduction/adduction moments, and knee flexion/extension moments) were smaller than those of Western people. The ranges of joint angles between the gait studies were largely different with each other, but most of motion patterns and excursions were similar.

• Korean Journal of Applied Biomechanics
• /
• v.24 no.3
• /
• pp.239-248
• /
• 2014

The purpose of this study was to quantify kinematic and kinetic characteristics of Yin-yang Bo gait according to their motor expertise, one of the Seokmun Ilwol martial art gait patterns. Yin-yang Bo gait pattern shows initial forefoot contact instead of heel contact, and increased time of stance phase time, internal-external rotation of ankle-knee-hip joints and pelvic. It aims to produce and store the more energy through continuous homeostasis of center of gravity (COG) and performance of stretch-shortening cycle. Some of these characteristics also were similar to the gait modification strategies for reducing knee adduction moment such as toe-out progression, medial thrust, internal rotation of hip joint. To identify the characteristics, four factors of expert Yin-yang Bo gait performance group were compared to that of none expert group; 1) angles of COG displacement and rotation 2) distal joint pre-rotation in internal-external rotation of ankle-knee-hip joints and pelvic, 3) invariability pelvic potential and pelvic segment total energy 4) knee abduction moment. Six healthy(three male) subjects participated in the experiment to perform Yin-yang gait pattern. Three-dimensional and force plate data were collected. Kinematic and kinetic data were compared between two groups using t-tests. Results showed that 1) the peak point of COG internal rotation angle was reduced in expert group, 2) kneeexternal and hip joint -internal and pelvic rotation angle peak frames were more near points in expert group.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.380-389
• /
• 2020

The conversion characteristics and fuel properties for producing biodiesel (BD) by blending beef-tallow, an animal waste resource with a high-saturated fatty acid content, and sunflower-oil, a vegetable oil with a high-unsaturated fatty acid content, were investigated. For this investigation, the effects of the control factors, such as the oil-blend ratio and methanol-to-oil molar ratio, on the fatty acid methyl ester and BD production yield were also investigated. The kinematic viscosity reduction effects of BD using heating and ultrasonic irradiation were verified, and the optimal temperature of each BD-diesel fuel blend for reducing the kinematic viscosity was derived using the correlation equation. As a result, the optimal conditions for producing blended biodiesel were verified to be TASU7 and a methanol-to-oil molar ratio of 10:1. The analysis results of the fuel properties of TASU7 satisfied the BD quality standard; hence, the viability of BD blended with waste tallow as fuel was verified. The experimental results on the kinematic viscosity reduction showed that heating is more effective in reducing the kinematic viscosity because it took less time than ultrasonic irradiation, and the equipment was cheaper and more straightforward than the ultrasonic irradiation method.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.5
• /
• pp.595-602
• /
• 2011

The long jump motion of 8 finalist of men's long jump of IAAF World Championships Daegu 2011 were analysed and the kinematic characteristics of the technique were investigated. The kinematic characteristics of long jump motion of 8 finalist were as follows. In the run-up phase, the average length of 3, 2, and 1 stride were $2.21{\pm}0.08$ m, $2.46{\pm}0.18$ m, and $2.19{\pm}0.16$ m, respectively. The change in the height of the center of gravity was $0.09{\pm}0.02$ m. The average velocity of 3, 2, and 1 stride was $10.37{\pm}0.32$ m/s, $9.63{\pm}0.32$ m/s, and $10.69{\pm}10.69$ m/s, respectively. In the take-off phase, the horizontal velocity, the vertical velocity, the reduction of horizontal velocity was $9.00{\pm}0.37$ m/s, $3.04{\pm}0.27$ m/s, and $1.69{\pm}0.34$ m/s, respectively. The minimum knee angle and the take off angle was $157{\pm}6.57^{\circ}$ and $18.5{\pm}2.24^{\circ}$, respectively. In the flight phase, the flight time and the maximum height of the center of gravity was $0.82{\pm}0.05$ s, and $1.70{\pm}0.10$ m, respectively. In the landing phase, the landing length was $0.51{\pm}0.06$ m. The body angle, the knee angle, and the hip angle was $71{\pm}20.93^{\circ}$, $136{\pm}19.19^{\circ}$, and $85{\pm}9.58^{\circ}$, respectively. The kinematic characteristics of long jump motion with good record were shown as follows. The reduction of the horizontal velocity in the take-off phase was minimized while the velocity of the run-up were maximally maintained. The vertical velocity in the take-off phase was increased with rapidly extended knee and the high center of gravity.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.5
• /
• pp.603-610
• /
• 2011

The long jump motions of 8 finalists in the women's long jump at the IAAF World Championships, Daegu 2011 were analyzed, and the kinematic characteristics of their techniques were investigated. The kinematic characteristics of the long jump motion of the 8 finalists were as follows. In the run-up phase, the length of the 2 stride was $108{\pm}6.92%$ that of the 3 stride. The length of the 1 stride was $91{\pm}5.78%$ that of the 2 stride. The change in the height of the center of gravity was $0.07{\pm}0.03$ m. The maximum velocity during the run-up phase was $9.44{\pm}0.13$ m at the 1 stride. In the take-off phase, the horizontal velocity, vertical velocity, reduction in horizontal velocity were $7.80{\pm}0.15$ m/s, $2.96{\pm}0.14$ m/s, and $1.64{\pm}0.19$ m/s, respectively. The minimum knee angle and take-off angle were $151{\pm}8.89^{\circ}$ and $20.7{\pm}1.03^{\circ}$, respectively. In the flight phase, the flight time and maximum height of the center of gravity were $0.78{\pm}0.03$ s, and $1.60{\pm}0.05$ m, respectively. In the landing phase, the landing length was $0.50{\pm}0.07$ m. The trunk angle, knee angle, and hip angle were $74{\pm}18.75^{\circ}$, $131{\pm}10.45^{\circ}$, and $82{\pm}9.03^{\circ}$, respectively. The kinematic characteristics of the motion of a good long jump were as follows. The reduction in the horizontal velocity in the take-off phase was minimized, and the maximum velocity of the run-up was maintained. The vertical velocity in the take-off phase was increased using a rapidly extended knee and high center of gravity.