• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.3
• /
• pp.52-58
• /
• 2009

If a moving target has a linear characteristics, the Kalman filter can estimate relatively accurate the location of a target, but this performance depends on how the dynamic status characteristics of the target is accurately modeled. In many practical problems of tracking a maneuvering target, a simple kinematic model can fairly accurately describe the target dynamics for a wide class of maneuvers. However, since the target can exhibit a wide range of dynamic characteristics, no fixed SKF(Simple Kalman filter) can be matched to estimate, to the required accuracy, the states of the target for every specific maneuver. In this paper, a new AKF(Active Kalman filter) is proposed to solve this problem The process noise covariance level of the Kalman filter is adjusted at each time step according to the study result which uses the neural network algorithm. It is demonstrated by means of a computer simulation that the tracking capability of the proposed AKF(Active Kalman filter) is better than that of the SKF(Simple Kalman Filter).

• Korean Journal of Remote Sensing
• /
• v.31 no.5
• /
• pp.461-471
• /
• 2015

In this study, we generated orthoimages and Digital Elevation Model (DEM) from Unmanned Aerial Vehicle (UAV) to confirm the accuracy of possibility of geospatial information system generation, then compared the DEM with the topographic height values measured from Real Time Kinematic-GPS (RTK-GPS). The DEMs were generated from aerial triangulation method using fixed-wing UAV and rotary-wing UAV, and DEM based on the waterline method also generated. For the accurate generation of mosaic images and DEM, the distorted images occurred by interior and exterior orientation were corrected using camera calibration. In addition, we set up the 30 Ground Control Points (GPCs) in order to correct of the UAVs position error. Therefore, the mosaic images and DEM were obtained with geometric error less than 30 cm. The height of generated DEMs by UAVs were compared with the levelled elevation by RTK-GPS. The value of R-square is closely 1. From this study, we could confirm that accurate DEM of the tidal flat can be generated using UAVs and these detailed spatial information about tidal flat will be widely used for tidal flat management.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.4 s.304
• /
• pp.11-18
• /
• 2005

For expressing intention the human often use body languages as well as vocal languages. Of course the gestures using arms and hands are the representative ones among the body languages. Therefore it is very important to understand the human arm motion in human-computer interaction. In this respect we present here how to estimate 3D pose of human arms by using computer vision systems. For this we first focus on the idea that the human arm motion consists of mostly revolute joint motions, and then we present an algorithm for understanding 3D motion of a revolute joint using vision systems. Next we apply it to estimating 3D pose of human arms using vision systems. The fundamental idea for this algorithm extension is that we may apply the algorithm for a revolute joint to each of the revolute joints of hmm arms one after another. In designing the algorithms we focus on seeking closed-form solutions with high accuracy because we aim at applying them to human computer interaction for ubiquitous computing and virtual reality.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.691-695
• /
• 2012

수위표의 영점에서 수면까지의 높이로 정의되는 해발수위는 유량 및 유사량 등과 같은 관련 수문자료를 생산하는데 기본이 되는 자료이며, 하천 및 수공구조물의 설계 등에 기초자료로 이용될 뿐만 아니라 수자원의 효율적인 관리 및 수문순환 해석을 위한 가장 중요한 기초자료로서 국가 차원의 올바른 수자원 계획과 정책을 수립하는데 널리 활용된다. 이와 같이 해발수위자료의 이용 분야가 다양하고 그 자체로서도 중요한 의미를 가지는 점을 고려할 때 무엇보다도 중요한 것은 자료의 품질이 확보되어야 하는 것이다. 그러나 영점표고검정수준점 및 기준 수위표의 설치 이후 오랜 시간이 경과됨에 따라 노후화와 수위관측소 주변의 환경변화가 발생하게 되어 자료의 정확도가 매우 낮아지고 있다. 본 연구에서는 해발수위 자료의 품질향상을 위해 수위관측소의 영점표고검정수준점 및 수위표 영점표고에 대하여 수준측량 및 RTK(Real Time Kinematic) GPS(Global Positioning System) 측량을 병행하여 수행하였으며, 조사측량된 값을 활용하여 기존에 측량된 영점표고검정수준점 및 수위표 영점표고에 대한 검토를 수행하였다. 금강 및 삽교천 수계에 위치한 50개 수위관측소 대하여 기존 측량값과 비교 검토한 결과 영점표고검정수준점은 0.10m 이하(54.0%), 0.10m 초과 ~ 0.50m 이하(26.0%), 0.50m 초과 ~ 1.00m 이하(6.0%), 1.00m초과 ~ 1.50m 이하(2.0%), 1.50m 초과 ~ 2.00m 이하(2.0%), 2.00m 초과 ~ 3.00m 이하(4.0%), 3.00m 초과(6.0%)의 값을 나타냈으며, 수위표 영점표고는 0.10m 이하(50.0%), 0.10m 초과 ~ 0.50m 이하(32.0%), 0.50m 초과 ~ 1.00m 이하(10.0%), 1.00m초과 ~ 1.50m 이하(2.0%), 1.50m 초과 ~ 2.00m 이하(2.0%), 2.00m 초과 ~ 3.00m 이하(2.0%), 3.00m 초과(2.0%)의 값을 가졌다. 이와 같이 기존과 금회 측량자료를 비교 검토한 결과 대부분이 안정적으로 유지되고 있으나 일부 수위관측소에서 변동량이 크게 발생한 원인은 영점표고검정수준점의 노후화, 기준 수위표의 교체 및 위치 변동, 인위적인 하천공사 등으로 인하여 발생한 것으로 판단된다.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.2
• /
• pp.532-542
• /
• 2021

The purpose of this study was to investigate the body's strategy through kinematic variables of the lower extremities and ground reaction forces to maintain the club-head speed and ball accuracy despite the three stances during the golf swing. Ten male golfers who official handicap two were participate in the experiment. All subjects performed swing after maintaining the address posture according to stance conditions(square; SS, open: OS, closed: CS). Using a 3D motion analysis system and force plateform, the results were calculated with the 7-iron full swing each stance. In result, there was no difference in center of displacement, and left and right hip and knee joint angle displacement. Left ankle joint was largely plantar-flexed in OS, and right ankle joint was largely performed in CS from the address to the downswing. From address to take-back, right foot had a large left direction and the left foot had a right direction were greater in OS than in CS. Therefore, despite various stances, maintaining the same posture at impact is thought to have a positive effect on club head speed and ball direction.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.9
• /
• pp.45-59
• /
• 2006

The successful performance of any numerical geotechnical simulation depends on the accuracy and efficiency of the numerical implementation of constitutive model used to simulate the stress-strain (constitutive) response of the soil. The corner stone of the numerical implementation of constitutive models is the numerical integration of the incremental form of soil-plasticity constitutive equations over a discrete sequence of time steps. In this paper a well known two-surface soil plasticity model is implemented using a generalized implicit return mapping algorithm to arbitrary convex yield surfaces referred to as the Closest-Point-Projection method (CPPM). The two-surface model describes the nonlinear behavior of coarse-grained materials by incorporating a bounding surface concept together with isotropic and kinematic hardening as well as fabric formulation to account for the effect of fabric formation on the unloading response. In the course of investigating the performance of the CPPM integration method, it is proven that the algorithm is an accurate, robust, and efficient integration technique useful in finite element contexts. It is also shown that the algorithm produces a consistent tangent operator $\frac{d\sigma}{d\varepsilon}$ during the iterative process with quadratic convergence rate of the global iteration process.

• 한국체육학회지인문사회과학편
• /
• v.57 no.6
• /
• pp.293-308
• /
• 2018

This study was carried out to investigate the current trends in skiing-related research from existing literature in the field of kinematics, measurement sensor and computer simulation. In the field of kinematics, research is being conducted on the mechanism of ski turn, posture analysis according to the grade and skill level of skiers, friction force of ski and snow, and air resistance. In the field of measurement sensor and computer simulation, researches are being conducted for researching and developing equipment using IMU sensor and GPS. The results of this study are as follows. First, beyond the limits of the existing kinematic analysis, it is necessary to develop measurement equipment that can analyze the entire skiing area and can be deployed with ease at the sports scene. Second, research on the accuracy of information obtained using measurement sensors and various analysis techniques based on these measures should be carried out continuously to provide data that can help the sports scene. Third, it is necessary to use computer simulation methods to clarify the injury mechanism and discover ways to prevent injuries related to skiing. Fourth, it is necessary to provide optimized ski trajectory algorithm by developing 3D ski model using computer simulation and comparing with actual skiing data.

• Journal of Cadastre & Land InformatiX
• /
• v.50 no.1
• /
• pp.107-123
• /
• 2020

With stabilization of the recent multi-GNSS infrastructure, and as multi-GNSS has been proven to be effective in improving the accuracy of the positioning performance in various industrial sectors. In this study, in view that SF(Single frequency) GNSS receivers are widely used due to the low costs, evaluate effectiveness of SF Real Time Point Positioning(SF-RT-PP) based on four multi-GNSS surveying methods with RTCM-SSR correction streams in static and kinematic modes, and also derive response challenges. Results of applying SSR correction streams, CNES presented good results compared to other SSR streams in 2D coordinate. Looking at the results of the SF-RT-PP surveying using SF signals from multi-GNSS, were able to identify the common cause of large deviations in the altitude components, as well as confirm the importance of signal bias correction according to combinations of different types of satellite signals and ionospheric delay compensation algorithm using undifferenced and uncombined observations. In addition, confirmed that the improvement of the infrastructure of Multi-GNSS allows SF-RT-SPP surveying with only one of the four GNSS satellites. In particular, in the case of code-based SF-RT-SPP measurements using SF signals from GPS satellites only, the difference in the application effect between broadcast ephemeris and SSR correction for satellite orbits/clocks was small, but in the case of ionospheric delay compensation, the use of SBAS correction information provided more than twice the accuracy compared to result of the Klobuchar model. With GPS and GLONASS, both the BDS and GALILEO constellations will be fully deployed in the end of 2020, and the greater benefits from the multi-GNSS integration can be expected. Specially, If RT-ionospheric correction services reflecting regional characteristics and SSR correction information reflecting atmospheric characteristics are carried out in real-time, expected that the utilization of SF-RT-PPP survey technology by multi-GNSS and various demands will be created in various industrial sectors.