• Bulletin of the Korean Chemical Society
• /
• v.34 no.5
• /
• pp.1586-1588
• /
• 2013

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.361-364
• /
• 2006

It is specified in KCI code that long-tenn deflection shall be determined by multiplying the immediate deflection by KCI code multiplier, unless it is obtained by a more comprehensive analysis. Therefore, in this study, the estimation method of long-term deflection by KCI code multiplier is known resonable by comparing analysis results using KCI code multiplier and AEMM.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.566-567
• /
• 2012

본 논문에서는 산성수를 전기분해하여 알칼리 이온수를 생성하는 정수 시스템을 제안하였다. 시스템은 크게 전해조, 냉각 유닛, 콤프레서, 정수?터 등으로 구성되어 있다. 특히 알칼리이온수를 생성하기 위해서는 전기분해를 위한 전력변환 회로가 필요하다. 본 논문에서는 알칼리이온수기를 위한 전해조 구동회로를 PSIM을 통한 검증 하였다.

• Journal of the Korea Institute of Building Construction
• /
• v.4 no.4
• /
• pp.143-150
• /
• 2004

The purpose of this study is to assess economic effects for a new technology-based ventilation system. The study has been performed using LCC technique for the economic analysis. Data for LCC analysis are collected from estimation and interview of estimators and maintenance experts of buildings. Based on the LCC analysis, the economic effect of a new technology-based ventilation system has been predicted as follows: for the investment during 15 years of study period, (1) return rate for the investment is 9.3 times. (2) 7.3% of LCC saving is predicted.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.05a
• /
• pp.179-183
• /
• 2005

In apply roof waterproof system using of synthetic high polymer sheet for rooftop measure physical performance (tension$\cdot$tearing ability, temperature relativity, heating stretch performance, junction performance, wind resistance test) by various test environment condition waterproof test of structure and performance of construction work aspect, present suitable form of construction work under these environment. Also, wish to improve durability of concrete structure as that examine in priority about adhesion method and joint junction method with waterproof out surface, and present new direction about roof system application of waterproofing method for rooftop.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.3
• /
• pp.29-34
• /
• 2012

This paper reports some experimental results in high speed rigid tapping of magnesium alloy(AZ91D). M3 spiral tap and high speed spindle tapping center of gantry type were used in experiments and thrust forces were measured. The experimental results indicate that the thrust forces are proportional to the spindle speed and depth of cut. The thrust forces increase as the depth of cut increases. M3 Tapping was achieved at the spindle speed of 10,000rpm, depth of cut of 1.5D and total stroke of 32mm.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.1
• /
• pp.77-82
• /
• 2009

This paper reports a kinematic analysis and experimental results for the polishing process of G7 LCD glass. A kinematic analysis for the relative motion of the upper plate and lower plate has been done and computer simulation has been programmed. A series of polishing experiments has also been carried out and compared with analytical data. The experimental results agreed well with analytical ones. The experimental results indicate that the polishing removal is proportional to the relative speed and pressure.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.1
• /
• pp.3-8
• /
• 2008

This paper reports some experimental results of cylindrical external grinding using CBN wheels. Many experimental studies for surface grinding have been done, but not for the cylindrical grinding due to the difficulty of grinding force measurement. In this paper a new experimental device has been proposed for the grinding force measurement in cylindrical grinding. The cylindrical grinding experiments were carried out at various grinding conditions with several CBN grinding wheels. The experimental results indicate that the CBN wheels with smaller grains result in the higher grinding forces in both SCM415 and STD11 workpieces. The grinding forces of all wheels were proportional to the infeed speeds and the difference of each wheels was prominent at high infeed speed for SCM415.

• 한국약용작물학회:학술대회논문집
• /
• 2011.04a
• /
• pp.164-165
• /
• 2011

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.284-287
• /
• 2004

A high ductile fiber reinforced mortar has been developed by employing micromechanics-based design procedure. Micromechanical analysis was initially performed to properly select water-cement ratio, and then optimal mixture proportion was determined based on workability considerations, including desirable fiber dispersion without segregation. Subsequent direct tensile tests revealed that the fiber reinforced mortar exhibited high ductile uniaxial tension property, represented by $1.8\%$ strain capacity, which is around 100 times the strain capacity of normal concrete.