• Journal of radiological science and technology
• /
• v.32 no.4
• /
• pp.361-370
• /
• 2009

The image quality management of bone mineral density is the responsibility and duty of radiologists who carry out examinations. However, inaccurate conclusions due to lack of understanding and ignorance regarding the methodology of image quality management can be a fatal error to the patient. Therefore, objective of this paper is to understand proper image quality management and enumerate methods for examiners and patients, thereby ensuring the reliability of bone mineral density exams. The accuracy and precision of bone mineral density measurements must be at the highest level so that actual biological changes can be detected with even slight changes in bone mineral density. Accuracy and precision should be continuously preserved for image quality of machines. Those factors will contribute to ensure the reliability in bone mineral density exams. Proper equipment management or control methods are set with correcting equipment each morning and after image quality management, a phantom, recommended from the manufacturer, is used for ten to twenty-five measurements in search of a mean value with a permissible range of ${\pm}1.5%$ set as standard. There needs to be daily measurement inspections on the phantom or at least inspections three times a week in order to confirm the existence or nonexistence of changes in values in actual bone mineral density. in addition, bone mineral density measurements were evaluated and recorded following the rules of Shewhart control chart. This type of management has to be conducted for the installation and movement of equipment. For the management methods of inspectors, evaluation of the measurement precision was conducted by testing the reproducibility of the exact same figures without any real biological changes occurring during reinspection. Bone mineral density inspection was applied as the measurement method for patients either taking two measurements thirty times or three measurements fifteen times. An important point when taking measurements was after a measurement whether it was the second or third examination, it was required to descend from the table and then reascend. With a 95% confidence level, the precision error produced from the measurement bone mineral figures came to 2.77 times the minimum of the biological bone mineral density change. The value produced can be stated as the least significant change (LSC) and in the case the value is greater, it can be stated as a section of genuine biological change. From the initial inspection to equipment moving and shifter, management must be carried out and continued in order to achieve the effects. The enforcement of proper quality control of radiologists performing bone mineral density inspections which brings about the durability extensions of equipment and accurate results of calculations will help the assurance of reliable inspections.

• Journal of the Korean Society of Radiology
• /
• v.5 no.2
• /
• pp.73-80
• /
• 2011

Questionnaires were distributed to Radiology departments at hospitals with 300 sickbeds throughout the Pohang region of North Gyeongsang Province concerning awareness and performance levels of infection control. The investigation included measurements of the pollution levels of imaging equipment and assistive apparatuses in order to prepare a plan for the activation of prevention and management of hospital infections. The survey was designed to question respondents in regards to personal data, infection management prevention education, and infection management guidelines. The ATP Public Heath Monitering System was used to measure seven items for pollution levels of imaging equipment and assistive apparatuses in the Radiology Department. Data was analysed using SPSS version 12.0 for paired t-test and Pearson coefficient with a statistically significant level of 0.05. The results of the survey showed a total awareness level of infection management prevention education averaged at $3.73{\pm}0.64$ and performance levels resulted at $3.39{\pm}0.83$ which were statistically significant (p = 0.01). Also the measurements of pollution levels for equipment with high patient contact showed a Pearson Coefficient of over 0.5 implying a focus on pathogenic bacterium. There was no statistical significance with the frequency of imaging (p < 0.05). Therefore for general hospitals with high patient contact, there is a need to supply analyzing equipment for real time monitoring and the implementation of disinfection management that uses a Ministry of Health and Welfare approved antiseptic solution twice every minute.

• Radiation Oncology Journal
• /
• v.20 no.2
• /
• pp.147-154
• /
• 2002

Purpose : Gingko biloba extract (GBE), a natural product extracted from Gingko leaves, is known to increase the radiosensitivity of tumors. This radiosensitization probably arises from the increase in the peripheral blood flow by decreasing the blood viscosity and relaxing the vasospasm. The influence of a GBE on the metabolic status in fibrosarcoma II (FSall) of a C3H mouse was investigated using $^{31}P$ magnetic resonance spectroscopy (MRS). Materials and Methods : Eighteen C3H mice with fibrosarcoma II $(from\;100\;mm^3\;to\;130\;mm^3)$ were prepared for this experiment. The mice were divided into 2 groups; one (9 mice) without a priming dose, and the other (9 mice) with a priming dose of GBE. The GBE priming dose (100 mg/kg) was administered by an intraperitoneal (i.p.) injection 24 hours prior to the measurement. First $^{31}P$ MRS spectra were measured in the mice from each group as a baseline and test dose of GBE (100 mg/kg) was then administered to each group. One hour later, the $^{31}P$ MRS spectra were measured again to evaluate the change in the energy metabolic status. Results : In the group without the priming dose, the mean pH, PCr/Pi, PME/ATP, Pi/ATP, PCr/(Pi+PME) values 1 hour after the test dose were not changed significantly compared to the values at the baseline. However, in the group with the priming dose, the mean PCr/Pi, Pi/ATP, PCr/(Pi+PME) values 1 hour after the test dose changed from the baseline values of 0.49, 0.77, 0.17 to 0.74, 0.57, 0.28 respectively. According to the paired t-test, the differences were statistically significant. Conclusion : The above findings suggest that the metabolic status is significantly improved after administering GBE if the priming dose is given 24 hours earlier. This shows that the radiosensitizing effect of GBE is based on the increase of tumor blood flow and the improvement in the metabolic status.

• Journal of Chest Surgery
• /
• v.31 no.7
• /
• pp.679-683
• /
• 1998

From June 1995 to May 1997, we have implanted 52 Sorin Bicarbon mechanical valves in 41 patients. They were 16 men and 25 women, and their mean age was 47.4${\pm}$14.8(range; 18∼74 y.o.). 35(27 mm∼31 mm) were in mitral position, 15(19 mm∼25 mm) in aortic position, and 2(31 mm) in tricuspid position. 3 CABGs and a tumor excision were taken concomittantly. 35 patients were primary operation, and 6 were re-do operations. By intraoperative transesophageal doppler echocardiography, transvalvular peak/mean pressure gradient was 6.1${\pm}$2.7/2.4${\pm}$1.4 mmHg in mitral position and 27.6/10.7 mmHg in aortic position. The effective valve opening area in mitral position was 3.2${\pm}$0.6 cm2. Follow-up was total 508.6 patient-months, and mean follw-up was 12.7${\pm}$9.2 months. NYHA class was improved from 2.6${\pm}$0.6 to 1.2${\pm}$0.3 in average postoperatively. During that period, there was no operative death. 2 late non-valve related deaths were occurred. One was died of COPD, and the other was possible acute myocardial infarction. Among 7 postoperative complications, one valve related complication(minimal paravalvular leakage) was noticed. In conclusion, Sorin Bicarbon mechanical valve is believed one of the safe choice in clinical settings. It showed excellent hemodynamic and mechanical functions, and very low postoperative valve related complications in short term clinical experience.

• The Korean Journal of Food And Nutrition
• /
• v.25 no.1
• /
• pp.132-141
• /
• 2012

This current survey was conducted to examine consumer attitudes toward factors determining beef purchasing and improving distribution systems. The frequency of beef purchasing was shown to reflect social and economic status, where inhabitants in large cities, such as Seoul, with higher salaries showed a higher frequency. In addition, consumers that were in their forties bought beef more frequently than consumers that were in their twenties. Consumers in Seoul and the megalopolis with a monthly income of higher than 200 million won preferred to purchase meat from department stores and discount markets. In contrast, people in small cities with lower incomes tended to buy meat from butcher shops and brand shops. In a question regarding unsatisfaction factors of retail beef, individuals that were in their thirties with a high income had concerns associated with packaging problems. For people under thirty with low income, the consistency of quality and price were the prime concerns. In regards to the beef grading system, consumer response varied between inhabitants, monthly income and age group, where consumers from small cities that were in their twenties and forties with a low income had a negative viewpoint. For the differential beef distribution system, housewives between the ages of 30 and 40 from a small city with an income higher than 200 million won had a positive response; however, a large number of consumers were not familiar with this system. The most demanding beef cuts were in the following order: loin, flank and rib. In addition, the most important factors determining purchasing beef were as follows: price, breed and portion.

• Food Science of Animal Resources
• /
• v.26 no.4
• /
• pp.525-531
• /
• 2006

Effects of Chlorella powder on the growth of lactic acid bacteria, ripening velocity and organoleptic properties in Appenzeller cheese were investigated. Added levels of Chlorella powder were 0, 0.5, 1.0 and 2.0%. The lactic acid bacteria count was higher in cheese added with Chlorella than those in the control cheese. The pH of cheese increased gradually after 3 weeks, reaching pH $5.4{\sim}6.2$ at 15 weeks of maturation, and the pH was slightly lower in Chlorella added cheese than in control cheese. The soluble nitrogen compounds, non casein nitrogen (NCN) and non protein nitrogen (NPN), in Appenzeller cheese increased during 15 weeks of ripening, and they were higher in Chlorella added cheese than in control cheese. Electrophoresis of cheese proteins revealed that caseins were degraded more rapidly in Chlorella cheese as the level of Chlorella increased so that the cheese with 2% Chlorella could have developed a bitter taste and a stench by an excessive degradation of proteins. Sensory scores of the cheese ripened for 15 weeks were diminished as the level of Chlorella increased especially the cheese added with 2% Chlorella obtained significantly lower values of sensory scores than control cheese. Among the Chlorella cheeses, 0.5% Chlorella added cheese showed the highest score in overall sensory preference. From the results, the adequate level of Chlorella powder being added to produce an Appenzeller cheese product with acceptable quality was suggested to be 0.5%.

• Tuberculosis and Respiratory Diseases
• /
• v.41 no.4
• /
• pp.405-412
• /
• 1994

Background: In Korea, the prevalence of tuberculosis and hepatitis is high, and combined therapy with rifampicin and pyrazinamide is used in tuberculosis, so drug induced hepatitis is not only problem of tuberculosis therapy but also cause of treatment failure. However most of recent reports on drug induced hepatitis during antituberculosis medication have dealt with its pathogenesis and have stressed the biochemical, and histopathological aspects of the disorder, whereas this study was designed primarily to provide information on the clinical features. Method: The subjects of study were 1414 patients treated with antituberculosis drugs on the department of chest medicine at National Medical Center during the 5-year 6-month period from January 1, 1988, to June 30, 1993. Retrospective analysis of clinical features for the 29 patients who developed drug induced hepatitis was done. Results: 1) The incidence of antituberculosis drug induced hepatitis was 2.1%. 2) Male to fema1e ratio of antituberculosis drug induced hepatitis was 2:1, but case rates among males and females were not significantly different. 3) Rates of drug induced hepatitis according to age distribution shows the most common incidence between 35 to 49 year old age group, but rates among groups of age were not significant1y different. 4) Drug induced hepatitis was most common in the case of moderate advanced pulmonary tuberculosis(rate is 2.78%), but rates among types of tuberculosis were not significant1y different. 5) 18 cases(62%) of antituberculosis drug induced hepatitis patients had no signs or symptoms. In remaining cases, they were nausea, vomiting, jaundice, hepatomegaly, icteric sclera, right upper quadrant tenderness in order. 6) 22 cases(76%) of antituberculosis drug induced hepatitis cases had occured within the first month. 7) The duration of abnormal liver function was $28{\pm}5$(Mean${\pm}$SD), ranged from 5 days to 180 days. 8) One case of antituberculosis drug induced hepatitis died. 9) The levels of abnormal GOT ranged from 64 to 1055U/L and GPT from 68 to 931U/L. Conclusion: There are no dicided predisposing factors of antituberculosis drug induced hepatitis, so it should be done biochemical monitoring as well as close monitoring for overt signs or symptoms of hepatitis to avoid the development of irreversible hepatic reaction, especially at the treatment of the first month.

• Korean Journal of Ichthyology
• /
• v.19 no.2
• /
• pp.107-111
• /
• 2007

Sex differentiation of the brown croaker Miichthys miiuy (Basilewsky) is described from hatching to the 120th day post-hatching (dph) (water temperature $24^{\circ}C$). Primordial germ cells (PGCs) were observed on the 20th dph (10.4 mm total length (TL), 0.14 g body weight (BW), and began to protrude into the peritoneal cavity from the 40th dph (19.4 mm TL, 0.39 g BW). On the 65th dph (31.3 mm TL, 0.93 g BW, $1,560D^{\circ}$ (degree-days)), initial ovarian differentiation was identified by the PGCs with condensed chromatin, and their transformation into meiotic oocytes. By the 120th dph (4.60 mm TL, 1.38 g BW, $2,880D^{\circ}$), the oocytes were in the perinucleolus stage and had increased from 20 to $40{\mu}m$ in diameter. While ovaries gradually grew after sex was differentiated, testes continued to multiply from the 65th dph. On the 80th dph (37.9 mm TL, 1.39 g BW, $1,920D^{\circ}$), the beginning of testis lobule formation was indicated by the occurrence of spermatogonial cysts enveloped by somatic cells in some of the testes. On the 120th dph, the testis lobules of some of the fish contained all germ cell stages through to the spermatocytes. Therefore, the sex differentiation type of the brown croaker is identified as gonochoristic.

• Journal of agricultural medicine and community health
• /
• v.41 no.4
• /
• pp.205-216
• /
• 2016

Objectives: We compared the difference of lipid, insulin resistance and metabolic markers based on HCV RNA in Korean adults.Methods: This was a cross-sectional study of 222 subjects visited the health promotion center of Pusan nationaluniversity hospital from 2004 to 2007. Subjects were anti-HCV antibody positive and were performed RT-PCR for HCV RNA. The HCV RNA (+) group were 85 subjects, HCV RNA (-) control group were 115 subjects, and the HCV RNA (-) but past positive group were 22 subjects. We performed anthropometry, anti-HCV, RT-PCR, plasma concentrations of insulin, total cholesterol, LDL-cholesterol, HDL-cholesterol, and triglyceride.Results: BMI, waist circumference, blood pressure, fasting plasma glucose, triglyceride, HDL cholesterol, insulin resistance such as HOMA-IR and QUICKI were not significantly different between HCV RNA positive and negative groups. The serum total cholesterol and LDL cholesterol level were significantly lower in the HCV RNA positive group than in the negative group ($186.24{\pm}37.63$ vs $197.22{\pm}37.23$ mg/dl, p=0.041, $111.66{\pm}34.06$ vs $121.38{\pm}35.50$ mg/dl, p=0.042). After adjusting age and sex, high total cholesterol (${\geq}200mg/dl$) (adjusted OR=0.51, 95%CI 0.28-0.94, p=0.03) and high LDL cholesterol (${\geq}130mg/dl$) (adjusted OR=0.46, 95%CI 0.24~0.87, p=0.02) were inversely associated with being HCV RNA positive (p<0.05). Conclusion: The serum total cholesterol and LDL-cholesterol level were significantly lower in HCV RNA (+) group than in HCV RNA (-) group, but not in HCV RNA (-) but past positive group. Prospective cohort studies are needed to clarify the relationship between HCV RNA and metabolic markers.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.1
• /
• pp.53-64
• /
• 2008

Statement of problem: Peri-implant marginal bone loss is an important factor that affects the success of implants in esthetics and function. Various efforts have been made to reduce this bone loss by improving implant design and surface texture. Previous studies have shown that early marginal bone loss is affected by implant neck designs. Purpose: The purpose of this study was to examine the influence of laser microtexturing of implant collar on peri-implant marginal bone loss. Materials and methods: Radiographical marginal bone loss was examined in patients treated with implant-supported fixed partial dentures. Marginal bone level was examined with 101 implant fixtures installed in 53 patients at three periods(at the time of implantation, prosthetic treatment and 6-month after loading). Four types of implants were examined. The differences of bone loss between implants(ITI standard) with enough biologic width and implants(ITI esthetic plus, Silhouette IC, Silhouette IC Laser-$Lok^{TM}$) with insufficient biologic width have been compared. Resorption angles were examined at the time of prosthetic delivery and 6-month after loading. Results and Conclusion: Within the limitation of this study, the following results were drawn. 1. The marginal bone loss of ITI standard and Silhouette IC Laser-$Lok^{TM}$ was less than that of ITI esthetic plus and Silhouette IC(P<0.05). The marginal bone loss between ITI standard and Silhouette IC Laser-$Lok^{TM}$ had no significant statistical difference(P>0.05). There was no significant statistical difference between marginal bone loss of ITI esthetic plus and Silhouette IC(P>0.05). 2. There was no significant difference in marginal bone loss between maxilla and mandible(P>0.05). 3. There was no significant difference in resorption angle among four types of implants(P>0.05). The marginal bone of implants with supracrestal collar design of less than that of biologic width had resorbed more than those with sufficient collar length. The roughness and laser microtexturing of implant neck seem to affect these results. If an implant with collar length of biologic width, exposure of fixture is a possible complication especially in the anterior regions of dentition that demand high esthetics. Short smooth neck implant are often recommended in these areas which may lack the distance between microgap and the marginal bone level. In these cases, the preservation of marginal bone must be put into consideration. From the result of this study, it may be concluded that laser microtexturing of implant neck is helpful in the preservation of marginal bone.