• Applied Biological Chemistry
• /
• v.18 no.2
• /
• pp.71-97
• /
• 1975

To improve the food qualities in Korea, two hundred and fourtynine kinds of food additives have been allowed in food processing, of which one hundred and nineteen kinds could be used under the limitted conditions. Hence, in practical uses in food processing, many kinds of them are mixed at random within the permitted amounts for their special purposes. For last several years, many kinds of the food additives were prohibited because they have been proved to be toxic even with the single dose. Until recently a few studies on the toxicity in the mixture of food additives were reported, however, they were shown to be no severe additional effect on the animal. This study was performed to see if any elevation of chronic or subacute toxicity of food additives occur especially when they are mixed with each other, using three kinds of food additives (DHA, AF-2, BHT) most widely used as food preservatives, antiseptics and antioxidants. One hundred and fifty young male rats were taken and divided into ten feeding groups, one first control group (food additives blank), three second control groups (DHA 0.1%, AF-2 0.1%, BHT 0.5%), three mixture groups of low level (mixture of each 60% of two second control level) and three mixture groups of high level (mixture of each 90% of two second control level). As the methods of biological and clinical tests, the change of body weight (growth rate), daily intake of diets, organ to body weight ratio, histopathological findings of organs, hematological observation, liver and kidney function tests were checked three times during the periods of 24 weeks. The following results were obtained. 1. The low level group of DHA, AF-2 mixture and DHA, BHT mixture revealed a little retardation in growth rate than the first control group, however, they were similar to the second controls, while all the mixture groups of high level showed a more remarkable retardation than the first and second controls. 2. Average daily intake of the diets was the same in each group, showing a similar decreasing tendency (70-100g/kg of body weight) in accordance with the growth rate. It was observed that there are no differences in the taste and appetite in each group of rats. 3. Abnormal enlargements of kidney and lung were not seen in all the mixture groups compared with the controls, while a slight hepatomegaly was observed in all mixture groups of low level as in the second controls. Significant differences (almost 1% level) were observed between the high level groups and the first control group. 4. Histopathological effects of the food additives on lung, kidney and liver tissues were found in all mixture group of high level. The less frequencies of the same effects were also seen in the low level groups. 5. The esterified cholesterol to total cholesterol ratio in the mixture groups of high level showed a little lower values, and the activities of serum glutamate oxaloacetate transaminase and alkaline phosphatase decreased almost with significance of 5% level compared with the first control group. The serum A/G ratio in the mixture groups also decreased. The results demonstrated that the liver function was decreased in the mixture groups compared with the controls. 6. In all groups throughout the test period, kidney functions (concentration of protein and creatinine excreated per hour in urine and renal filtration rate) were shown almost as normal as the first control. 7. Average values of hematocrit, erythrocytes and leucocytes in the mixture groups were in the normal ranges as in the controls, which denotes that the production of blood cells in bone marrow were also normal in all groups. With the above results, it is concluded that when the food additives (DHA, AF-2, BHT) were given together to the rats in several combinations even in less amount, they showed more toxic signs than the single doses.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.26 no.1
• /
• pp.52-72
• /
• 1984

This study was performed to obtain the basic data which can be applied to the use of epoxy resin mortars. The data was based on the properties of epoxy resin mortars depending upon various mixing ratios to compare those of cement mortar. The resin which was used at this experiment was Epi-Bis type epoxy resin which is extensively being used as concrete structures. In the case of epoxy resin mortar, mixing ratios of resin to fine aggregate were 1: 2, 1: 4, 1: 6, 1: 8, 1:10, 1 :12 and 1:14, but the ratio of cement to fine aggregate in cement mortar was 1 : 2.5. The results obtained are summarized as follows; 1.When the mixing ratio was 1: 6, the highest density was 2.01 g/cm$^3$, being lower than 2.13 g/cm$^3$ of that of cement mortar. 2.According to the water absorption and water permeability test, the watertightness was shown very high at the mixing ratios of 1: 2, 1: 4 and 1: 6. But then the mixing ratio was less than 1 : 6, the watertightness considerably decreased. By this result, it was regarded that optimum mixing ratio of epoxy resin mortar for watertight structures should be richer mixing ratio than 1: 6. 3.The hardening shrinkage was large as the mixing ratio became leaner, but the values were remarkably small as compared with cement mortar. And the influence of dryness and moisture was exerted little at richer mixing ratio than 1: 6, but its effect was obvious at the lean mixing ratio, 1: 8, 1:10,1:12 and 1:14. It was confirmed that the optimum mixing ratio for concrete structures which would be influenced by the repeated dryness and moisture should be rich mixing ratio higher than 1: 6. 4.The compressive, bending and splitting tensile strenghs were observed very high, even the value at the mixing ratio of 1:14 was higher than that of cement mortar. It showed that epoxy resin mortar especially was to have high strength in bending and splitting tensile strength. Also, the initial strength within 24 hours gave rise to high value. Thus it was clear that epoxy resin was rapid hardening material. The multiple regression equations of strength were computed depending on a function of mixing ratios and curing times. 5.The elastic moduli derived from the compressive stress-strain curve were slightly smaller than the value of cement mortar, and the toughness of epoxy resin mortar was larger than that of cement mortar. 6.The impact resistance was strong compared with cement mortar at all mixing ratios. Especially, bending impact strength by the square pillar specimens was higher than the impact resistance of flat specimens or cylinderic specimens. 7.The Brinell hardness was relatively larger than that of cement mortar, but it gradually decreased with the decline of mixing ratio, and Brinell hardness at mixing ratio of 1 :14 was much the same as cement mortar. 8.The abrasion rate of epoxy resin mortar at all mixing ratio, when Losangeles abation testing machine revolved 500 times, was very low. Even mixing ratio of 1 :14 was no more than 31.41%, which was less than critical abrasion rate 40% of coarse aggregate for cement concrete. Consequently, the abrasion rate of epoxy resin mortar was superior to cement mortar, and the relation between abrasion rate and Brinell hardness was highly significant as exponential curve. 9.The highest bond strength of epoxy resin mortar was 12.9 kg/cm$^2$ at the mixing ratio of 1:2. The failure of bonded flat steel specimens occurred on the part of epoxy resin mortar at the mixing ratio of 1: 2 and 1: 4, and that of bonded cement concrete specimens was fond on the part of combained concrete at the mixing ratio of 1 : 2 ,1: 4 and 1: 6. It was confirmed that the optimum mixing ratio for bonding of steel plate, and of cement concrete should be rich mixing ratio above 1 : 4 and 1 : 6 respectively. 10.The variations of color tone by heating began to take place at about 60˚C, and the ultimate change occurred at 120˚C. The compressive, bending and splitting tensile strengths increased with rising temperature up to 80˚ C, but these rapidly decreased when temperature was above 800 C. Accordingly, it was evident that the resistance temperature of epoxy resin mortar was about 80˚C which was generally considered lower than that of the other concrete materials. But it is likely that there is no problem in epoxy resin mortar when used for unnecessary materials of high temperature resistance. The multiple regression equations of strength were computed depending on a function of mixing ratios and heating temperatures. 11.The susceptibility to chemical attack of cement mortar was easily affected by inorganic and organic acid. and that of epoxy resin mortar with mixing ratio of 1: 4 was of great resistance. On the other hand, when mixing ratio was lower than 1 : 8 epoxy resin mortar had very poor resistance, especially being poor resistant to organicacid. Therefore, for the structures requiring chemical resistance optimum mixing of epoxy resin mortar should be rich mixing ratio higher than 1: 4.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.14 no.3
• /
• pp.108-118
• /
• 2012

To investigate the responses of yellow poplar (Liriodendron tulipifera L.) seedlings to the interactive effects of the elevated atmospheric $CO_2$ level and nitrogen addition, we measured biomass, photosynthetic pigments, photosynthesis, and the contents of nitrogen (N) and carbon (C) from the seedlings after 16 weeks of the treatments. Yellow poplar seedlings were grown under the ambient ($400{\mu}mol\;mol^{-1}$) and the elevated (560 and $720{\mu}mol\;mol^{-1}$) CO2 concentratoins with three different N addition levels (1.2, 2.4, and $3.6g\;kg^{-1}$) in the Open Top Chambers (OTC). The dry weight of the seedlings enhanced with the increased N levels under the elevated $CO_2$ concentrations and the increment of the dry weight differed among the different N levels. Photosynthetic pigment content of the yellow poplar leaves also increased with the increase of the $CO_2$ concentration levels. The effects of the N levels on the photosynthetic pigment content, however, were significantly different among the $CO_2$ levels. Photosynthetic rates were affected by the levels of $CO_2$ and N concentrations. Stomatal conductance and transpiration rates increased with increasing $CO_2$ concentration. The carboxylation efficiency of the seedlings without N addition increased under the higher $CO_2$ concentrations whereas that with N addition decreased under the elevated $CO_2$ concentrations. Nitrogen and carbon uptake in leaf, stem, and root increased with the elevated $CO_2$ concentration level and N addition. In conclusion, under the elevated $CO_2$ concentrations, physiological characteristics and carbon uptake of the yellow poplar seedling were improved and increased with N addition.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.12 no.2
• /
• pp.143-151
• /
• 2010

The impact of climate change on rice plants in Gangwon province was examined by comparing the climatic conditions during the recent 10 years (2000~2009) with those of normal (1971~2000) years, and by evaluating the rice plant responses. The daily mean air temperature increased by $0.5^{\circ}C$ while the daily range decreased by $0.1^{\circ}C$ as compared with the normal years. During the main rice growing period in field (from June to September) precipitation increased from 900 to 1,051mm and sunshine hours decreased from 704 to 619 hours. The respiration consumption effect during the rice growing period increased by 0.07 as a result of increased air temperature and reduced sunshine hours. The optimum heading date (determined by the mean air temperature for 40 days after the heading) was delayed in Chuncheon, Hongcheon, Wonju, and Gangneung compared with the normal. The maximum climatic yield potential based on mean temperature and sunshine hours for 40 days after the rice heading decreased by 94 kg/10a mainly due to the decrease in sunshine. The mean air temperature for 40 days after the rice heading from 1999 to 2009 in Chuncheon, Cheorwon, and Gangneung was generally above $22^{\circ}C$ implying that yield and quality of rice can be reduced. Therefore, it is necessary to delay the heading date by planting mid- to late-maturing varieties or by changing the transplanting date in order to produce high quality rice and to maintain rice productivity. In addition, it is also important to develop or select cultivars suitable to changing climate for each region in Gangwon province.

• The Korean Journal of Pharmacology
• /
• v.29 no.1
• /
• pp.97-105
• /
• 1993

Adenosine receptors in rat adipose tissues have been reported to be of $A_{1}$ subclass, and their stimulation leads to inhibition of adenylyl cyclase, resulting in inhibition of lipolysis. In the present study we investigated changes in $A_{1}$ adenosine receptor-adenylyl cyclase system of adipocytes following induction of experimental diabetes in rats. One week following experimental diabetes were induced by intravenous injection of streptozotocin (50 mg/kg body wt.), adipocytes from rats $(170{\sim}230g)$ fed ad libitum were isolated using collagenase. When adipocytes were incubated for 1 h with 1 unit/ml adenosine deaminase and $1\;{\mu}M$ isoproterenol, and assayed for glycerol formation, it was found that the inhibition of lipolysis in diabetic adipocytes by $(-)-N^{6}-(R-phenylisopropyl)adenosine$ (PIA), an $A_{1}$, adenosine receptor agonist, was twice that of control adipocytes. In an effort to delineate the mechanism(s), $[^{3}H]PIA$ binding to adipocytic membranes from diabetic and control rats were determined. Neither the affinities nor numbers of $A_{1}$ adenosine receptor were significantly different from each other (Best fit parameters for the one-site model are: $K_{d}=0.51{\pm}0.09nM$ and $B_{max}=1.60{\pm}0.12\;pmoles/mg$ protein for control membranes; $K_{d}=0.54{\pm}0.21\;nM$ and $B_{max}=1.72{\pm}0.31\;pmoles/mg$ protein for diabetic membranes). However, the inhibiton by PIA of the isoproterenol-stimulated adenylyl cyclase activities was found to be 1.9 times higher in adipocytic membranes from diabetic rats than those from controls. These results suggest that the increased sensitivity of inhibition of lipolysis to PIA in adipocytic membranes from diabetic rats is due to changes in signal transduction pathways, rather than alterations of $A_{1}4 adenosine receptor molecules themselves.

• The Korean Journal of Physiology
• /
• v.7 no.1
• /
• pp.23-31
• /
• 1973

Numerous factors concern with the absorption of substances through the membrane of the gastrointestinal tract. To simplify the experimental condition, present work has been restricted to observe the disappearance rate of substance from the intestinal loop which was made in the jejunum, 70 cm apart from the pylorus of the adult rabbit. The purpose of the study is to clarify the absorption of urea through the jejunal wall is solely attributable to the concentration difference between the luminal fluid and plasma, and to observe the effect of adding red pepper upon the rate of absorption. The rabbits were anesthetized with nembutal, 35mg/kg I.V. Jejunal loop was made by ligating at 2 spots, 70 cm and 80cm apart from the pylorus. After rinsing with normal saline solution through the polyethylene tubing inserted from the end of the loop, 8 ml of test solution was placed through the same tubing. The test solution contained 200 mg% of urea and 150mg% of polyethylene glycol(M.W. 4,000) in normal saline solution. Right after placing the test solution the first specimen was taken through the tubing, and successive samplings were performed at 5, 10, 20, and 30 minutes. Logarithm of the difference of urea concentration between the luminal fluid and plasma was plotted against time elapsed after the onset of the experiment. If straight line is revealed, it would verify the nature of transport mechanism as diffusion, obeying the Fick's principle. The concentration of polyethylene glycol (PEG) was also measured in order to examine the change in the volume. PEG was used as the marker substance because it is not absorbable in the intestinal tract. Consequently the concentration of PEG relates inversely to the volume of the loop. Instantaneous concentration of urea in the loop times the volume will give the amount of urea remaining in the luminal fluid. The change in the amount of any substance is directly relate to the volume of the compartment and differs from the change in the concentration which is independent of the volume. After completion of the experiment without red pepper, it was added in the test solution and was centrifuged after thorough mixing. Supernatant of the mixture was placed in the loop and similar sampling were performed with the same time intervals that of previous run in order to observe the effects of the red pepper on the passive transport of the water soluble small substance, urea. The results obtained were as follows: 1. Logarithm of the concentration difference of urea between the luminal fluid and plasma was diminished exponentially as time elapsed. The decay constant in the experiment without red pepper was 0.0563/min. By adding red pepper in the test solution as much as the concentration rose to 4,000 mg% and 8,000 mg%, the decay constants were lowered to 0.0493/min and to 0.0506/min, respectively. The time interval by which the concentration difference dropped to one half of the initial value was prolonged. Without red pepper the half concentration time was 13.30 minutes, and by adding extract of red pepper, 15.31 minutes and 15.71 minutes were revealed. 2. The profile of the diminishing rate of tile amount of urea was quite different from that of the concentration because of the change in the volume of the loop during the observed period. 3. By adding the extract of red pepper, it slowed down the rate of absorption of urea in the intestinal loop, suggesting an increase in the diffusional barrier. 4. Larger dosage of red pepper brought an increase in the secretion of intestinal fluid with concomitant expansion of the luminal volume, and the retardation of the absorption of urea was noticed. This effect was largely dependent on the sensitivity of the individual animal to the red pepper, extract. The amount of urea remained after 10 minutes interval was 55.5% of the initial amount in the experiment without red pepper. On the other hand it was not consistent after administration of red pepper, showing 50.6% and 66.5% of the initial figures by adding 400 mg and 800 mg of red pepper in the test solution, respectively. It was postulated that symptom of diarrhea often encountered by taking a hot (red pepper) food might be attributable to the increase of secretion and the retardation of absorption in the intestinal tract.

• Restorative Dentistry and Endodontics
• /
• v.24 no.4
• /
• pp.647-656
• /
• 1999

The purpose of this study was to investigate the shear bond strength and marginal microleakage of composite to enamel and dentin according to different treatment methods when the applied bonding agent was contaminated by artificial saliva. For the shear bond strength test, the buccal and occlusal surfaces of one hundred twenty molar teeth were ground to expose enamel(n=60) and dentin surfaces(n=60). The specimens were randomly assigned into control and 5 experimental groups with 10 samples in each group. In control group, a bonding system(Scotchbond$^{TM}$ Multi-Purpose plus) and a composite resin(Z-100$^{TM}$) was bonded on the specimens according to manufacture's directions. Experimental groups were subdivided into 5 groups. After polymerization of an adhesive, they were contaminated with at artificial saliva on enamel and dentin surfaces: Experimental group 1 ; artificial saliva was dried with compressed air. Experimental group 2 ; artificial saliva was rinsed with air-water spray and dried. Experimental group 3 ; artificial saliva was rinsed, dried and applied an adhesive. Experimental group 4 ; artificial saliva was rinsed, dried, and then etched using phosphoric acid followed by an adhesive. Experimental group 5, artificial saliva was rinsed, dried, and then etched with phosphoric acid followed by consecutive application of both a primer and an adhesive. Composite resin(Z-100$^{TM}$) was bonded on saliva-treated enamel and dentin surfaces. The shear bond strengths were measured by universal testing machine(AGS-1000 4D, Shimaduzu Co. Japan) with a crosshead speed of 5mm/minute under 50kg load cell. Failure modes of fracture sites were examined under stereomicroscope. The data were analyzed by one-way ANOVA and Tukey's test. For the marginal microleakage test, Class V cavities were prepared on the buccal surfaces of sixty molars. The specimens were divided into control and experimental groups. Cavities in experimental group were contaminated with artificial saliva and those surfaces in each experimental groups received the same treatments as for the shear test. Cavities were filled with Z-100. Specimens were immersed in 0.5% basic fuchsin dye for 24 hours and embedded in transparent acrylic resin and sectioned buccolingually with diamond wheel saw. Four sections were obtained from the one specimen. Marginal microleakages of enamel and dentin were scored under streomicroscope and averaged from four sections. The data were analyzed by Kruskal-Wallis test and Fisher's LSD. The results of this study were as follows. 1. The shear bond strength to enamel showed lower value in experimental group 1(13.20${\pm}$2.94MPa) and experimental group 2(13.20${\pm}$2.94MPa) than in control(20.03${\pm}$4.47MPa), experimental group 4(20.96${\pm}$4.25MPa) and experimental group 5(21.25${\pm}$4.48MPa) (p<0.05). 2. The shear bond strength to dentin showed lower value in experimental group 1(9.35${\pm}$4.11MPa) and experimental group 2(9.83${\pm}$4.11MPa) than in control group(17.86${\pm}$4.03MPa), experimental group 4(15.04${\pm}$3.22MPa) and experimental group 5(14.33${\pm}$3.00MPa) (p<0.05). 3. Both on enamel and dentin surfaces, experimental group 1 and 2 showed many adhesive failures, but control and experimental group 3, 4 and 5 showed mixed and cohesive failures. 4. Enamel marginal microleakage was the highest in experimental group 1 and there was a significant difference in comparison with other groups (p<0.05). 5. Dentin marginal microleakages of experimental group 1 and 2 were higher than those of other groups (p<0.05). This result suggests that treatment methods, re-etching with 35% phosphoric acid followed by re-application of adhesive or repeating all adhesive procedures, will produce good effect on both shear bond strength and microleakage of composite to enamel and dentin if the polymerized bonding agent was contaminated by saliva.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.4
• /
• pp.710-716
• /
• 2001

This study was conducted to examine the effects of dietary oligosaccharide on the blood glucose and serum lipid composition in streptozotocin (STZ)-induced diabetic rats. Sprague-Dawley male rats weighing 150$\pm$10g were randomly assigned to one normal and four STZ-induced diabetic groups. Diabetic groups were classified to basal diet(DM group) 10% xylooligosaccharide diet(DM-XO group) 10% isomaltooligosaccharide(DM-IMO group) and 10% fructooligosaccharide (DM-FO). Diabetes was experimentally induced by intravenous injection of 50 mg/kg of body weight of STZ in citrate buffer (pH 4.3) after feeding of experimental diets for 4 weeks. The rats were fed with experimental diet for further 4 weeks in diabetic state. The oligosaccharide diets were not effected on the body weight food intakes and food efficiency ratio. The oligosaccharide diets were also not effected on the body weight food intakes and food efficiency ratio. The oligosaccharide diets were also not effected on the weights of liver kidney and small intestine but the weight of cecum was significantly increased on the groups of xylooligosaccharide and isomaltooligosaccharide diet. The levels of oral glucose tolerance test was more effectively improved by DM-XO group. The levels of blood glucose were markedly lower in oligosaccharide supplemented groups than that of DM group. The levels of blood glucose were markedly lower in oligosaccharide supplemented groups than that of DM group. Activities of two intestinal enzymes such as lactase and sucrase in DM-XO and DM-FO groups were lower than that of DM group while activity of maltase was lower only in DM-XO in DM-FO groups than that of DM-group respectively. The levels of serum triglyceride in DM-XO group were lower than that of DM-group respectively. The levels of serum triglyceride in DM-XO groups were lower than that of DM group however was no significant differences among the oligosaccharide groups. These results suggest that dietary oligosaccharide may act as functional food to be capable of improving carbohydrate and lipid metabolism in diabetic rats.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.5
• /
• pp.644-651
• /
• 2005

Dietary supplement mainly made of herb and fiber was examined whether it could reduce body weight and fat, modify blood lipid concentrations and bowel habits in 30 collegians without intentional diet restriction or lifestyle change for 5 weeks. Free-living subjects were required to take diet pills 2 times daily 30 minutes before meals. Before the study began, 24 hr recall diet record and the questionnaires had been collected. Anthropometric measurements (height, weight, waist and hip circumferences, triceps and abdomen skinfold thickness, and body fat) were performed and blood samples were withdrawn before and after the study. Blood lipid fractions analyzed were total cholesterol (TC), triglyceride (TG), HDL-cholesterol and LDL-cholesterol. After the trial, body weight, body mass index, and percent ideal body weight of the subjects were reduced to mean of 0.5 kg, 0.2 and $0.9\%$, respectively (p<0.05). Percent body fat, triceps and abdomen skinfold thickness, and waist and hip circumferences were all reduced significantly except for $\%$ abdominal fat, but $\%$ body muscle mass increased from $36.5\%$ to $37.4\%$ (p=0.000). TC and TG were remarkably diminished (p<0.01) and LDL-cholesterol tended to decrease, but no change was observed in HDL-cholesterol. Bowel movements were also increased (p<0.01). In conclusion, this specific herb and fiber-rich dietary supplement reduced body weight and body fat indices, improved anthropometric indices, modified blood lipid fractions and bowel movement desirably. The study suggest that herb and fiber-rich dietary supplement might help control body weight, body fat loss and adult diseases positively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.5
• /
• pp.674-680
• /
• 2005

The purposes of this study were to compare the effect of several reheating treatments (heating in the frying pan, convection oven and microwave oven) on sensory characteristics and to evaluate the safety during storage period of cook/chill Pajeon. The sensory evaluations were made on 5 sensory attributes by a 9-member panel using quantitative descriptive analysis (QDA). The fresh cooked Pajeon and the Pajeon reheated in the frying pan obtained a significantly (p<0.01) higher score in taste than the ones reheated in a convection oven and microwave oven. The reheated cook/chill Pajeon had a significantly (p<0.01) lower score in flavor than the freshed cooked one. Regardless of the reheating methods, sensory scores in texture of the Pajeon reheated at $v$ for 1 day were not different from that of fresh cooked one. However, the scores of the reheated ones in a convection oven and in a microwave oven decreased with storage time up to 5 days at $3^{\circ}C$. On the other hand, the Pajeon reheated in the frying pan, even after 3 days' storage at $3^{\circ}C$, was not found to be inferior to the freshed cook one in every quality attributes except flavor. Therefore, the reheating treatment in frying pan may be superior to those in a convection oven and a microwave oven. The safety of Pajeon was also evaluated by measuring total count, coliform count, psychrotrophic count, acid value and peroxide value during 5 days of storage periods at $4^{\circ}C$. Total counts of Pajeon was ranged from not detectable to $5.2\times10^2$ CFU/g. The coliform and psychrotroph were not detected at all experiments. The acid values were ranged from 1.90 to 4.03 mg of KOH/g of fat until 5 days at $4^{\circ}C$. And the peroxide values were ranged from 3.63 to 12.50 meq of peroxide/kg of fat until 5 days of storage period. Therefore, these results demonstrated that Pajeon is microbiologically and chemically safe during 5 days of storage period at refligeration temperature.