• The Korean Journal of Petroleum Geology
• /
• v.14 no.1
• /
• pp.12-20
• /
• 2008

Oil sands in Canada are representative example of unconventional resources whose reserve estimates are as large as those in Saudi Arabia. Typical reservoir rocks of oil sands consist of channel-related deposits formed in a tide-dominated depositional setting. The tidal deposits are commonly characterized by spatially complicated and heterogeneous properties. Successful engineering methods to develop oil sands require in-depth understanding in the spatial distribution of reservoir properties. Geological model for oil sand reservoir characterization can be built on the basis of comparative studies of ancient and modem analogues. In particular, modern analogue studies become increasingly indispensable, since they provide better understanding in the reservoir-rock forming process and more importantly in the external mechanism responsible for the reservoir heterogeneity. Tide-dominated environment along the west coast of Korea is considered as one of the most excellent modem analogues of oil-sand forming depositional environment. Korean tidal environment provides insights on the origin of mud breccia, facies and stratigraphic architecture which are key issues to the characterization of oil sand reservoirs.

• Economic and Environmental Geology
• /
• v.52 no.5
• /
• pp.367-379
• /
• 2019

Pyeongan Supergroup (PS) in the Taebaeksan basin preserves key geological evidences to understand the tectonometamorphic evolution of the Songrim orogeny that affected the formation of the Korean Peninsula during the late Paleozoic to early Mesozoic. The aims of this paper therefore are to investigate the characteristics of the Songrim orogeny based on the previous results of metamorphism and deformations of the PS, and then to review geological significance and research necessity of the PS. Age distributions and Th/U ratio of detrital zircon in the PS indicate that sedimentary environment of the Taebaeksan basin during the late Paleozoic was arc-related foreland basin and retro-arc foreland basin at the active continental margin. In addition, the main magmatic activities occurred in the early Pennsylvanian and Middle Permian, thus sedimentation and magmatic activities occurred simultaneously. The PS was affected by lower temperature-medium pressure (M1) and medium temperature and pressure (M2) regional metamorphism during the Songrim orogeny. During M1, slate and phyllite containing chloritoid, andalusite, kyanite porphyroblasts intensively deformed by E-W bulk crustal shortening combined with folding and shearing. And garnet and staurolite porphyroblasts were formed during the N-S bulk crustal shortening accompained by M2. Such regional metamorphism of the PS is interpreted to occur in an area where high strain zone is localized during ca. 220-270 Ma. In order to elucidate the evolution of the Taebaeksan basin and tectonic features of the Songrim orogeny, it is expected that the study will be carried out such as the regional distribution of metamorphic zones developed in the PS, characteristics and timing of deformations, and late Paleozoic paleo-geography of the Taebaeksan basin.

• Korean Journal of Optics and Photonics
• /
• v.30 no.5
• /
• pp.187-192
• /
• 2019

In this paper a pump combiner, a key component of a high-power fiber laser, was fabricated, and its output characteristics measured using a high-power performance measuring instrument. The $(18+1){\times}1$ pump combiner consists of an optical-fiber bundle of one signal fiber and 18 pump fibers, an output optical fiber, and housing. The signal and output fibers were fabricated using polarization-maintaining optical fiber. By measuring the loss of signal light along the tapering length of the optical-fiber bundle, the tapering length was optimized to 18 mm. Signal-light insertion loss, pump-light transmittance, and polarization extinction ratio of the fabricated $(18+1){\times}1$ pump combiner were measured as 6.5%, 98.07%, and 18.0 dB respectively. The temperature distribution of the pump combiner, at a high power of 2 kW using 18 pump laser diodes, was measured and analyzed using a thermal-imaging camera.

• The Journal of Natural Sciences
• /
• v.12 no.1
• /
• pp.85-101
• /
• 2002

Landscape civilization in Korea originated in Cochosun(Ancient Chosun) era, this again succeeding to the period of the Three States - Koguryo, Baekje and Silla. The distribution of this culture showed great progress with the association of two particular religions - Buddhism and Confucianism.. Landscape development in Korea has greatly changed during specific times of both cultural and political upheaval in various societies. Religion has had a great deal of influence on landscape development. Traditionally Korean people have had a tendency to favor more natural landscape than man-made structures in landscape : This trend was a quite different concept from that of other oriental countries, not to mention of western countries. In particular, Buddhism influenced natural landscape, far from artificial craftsmanship in landscape. Oriental garden is a typical 'tabloid edition' of natural landscape which consists lakes, islands, ponds, stone monuments, and fruit trees, quite often raising animal in parks and courtyard style house. This style of garden influenced in Chosun Dynasty landscape. Landscaping was usually for royal gardens, cemetery parks or high level of officer's residence. However, landscaping in Chosun Dynasty which had established Confucianism as a state religion gave us a specific designation. It was neither ethnic imitation of the garden style of both China and Japan : People were used to enjoy nature-friendly landscape or sink into the ecstasy of natural scenery itself. The trend that landscape or establishing garden had been aimed at royal family- or bureaucrat-centered formatives was to become an obstacle to the development of landscape techniques in Korea. An example represented in a beautiful garden with fabulous decoration which established in places. This was completely not fit for the nation's feeling.

• Elastomers and Composites
• /
• v.40 no.2
• /
• pp.93-103
• /
• 2005

In this study, surface treatment of the elastomeric matrix was investigated to develop a substituting material for steel dynamic damper of automobile. The key technology is to get ultra high density elastomeric compound in order to substitute steel dynamic damper. The optimum matrix material(chloroprene rubber) and filler(metal powder) were selected for this. The several properties of elastomeric compound were examined. According to the results, the $t_{s2}$ of filled elastomeric compound was decreased with increasing the filler loading whereas the $t_{90}$ was increased. Also, tensile strength and rebound resilience were decreased with filler loading. To solve the problem of high filler loading, the photo grafting technique was employed on elastomeric matrix. The degree of grafting was determined by FTIR-ATR. Also, the filler surface was modified by chemical etching and the surface morphology was examine by SEM. After chemical treatment of filler, the particle size analyzer was used to examined the particle size, size distribution, and morphology of the modified filler.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.4
• /
• pp.317-330
• /
• 2021

Objectives: By law, companies in Korea must periodically measure workers' exposure to harmful chemicals (the system is called the Work Environment Monitoring Program (WMP)[a]) and report the results to the government. The government also measures exposure to monitor the WMP's reliability (called Reliability Assessment (RA) for WMP[b]). The issue is that measured data from these two sources are so different that the objectivity of WMP needs to be confirmed by comparing the results using the European Centre for Ecotoxicology and Toxicology of Chemicals' Targeted Risk Assessment (ECETOC TRA). Methods: Step 1: Data collection from WMP reports submitted by companies (n=586) and RA for WMP written by the government (n=33). Step 2: Data Standardization by key information included. Step 3: Data conversion to input-variables required to run the ECETOC TRA model, and run the model with specific data (n=514) which meet the predetermined exposure scenario. Step 4: Statistical data analysis by process category (PROC) and ventilation type from each source ([A] and [B]). Step 5: Additional analysis of any unexpected results. Results: The process categories of the production and handling of Dichloromethane were classified into 12 PROCs, and ten of them were selected to run ECETOC TRA. Modeled values tended to be higher than measured values from both sources. For the measured values from WMP, RCR distribution by PROC was narrow (0.197-0.267, 95% CI) and did not have a relationship with ventilation type, which differs from the tendency of the modeling result. Meanwhile, the measured values from RA for WMP were relatively widely distributed (0.301-1.177, 95% CI) by PROC. In particular PROCs (13,19) were high enough to exceed 1. Also, they become low with better ventilation types and appear differently depending on the ventilation type, similar to the model result. Conclusions: This study revealed that ECETOC TRA might have the potential to serve as a screening tool for exposure assessment and to be used as assistive method for WMP to estimate exposure. Further empirical study is required to confirm its availability as a screening tool.

• Korean Journal of Environment and Ecology
• /
• v.32 no.6
• /
• pp.591-602
• /
• 2018

Clithon retropictus has been designated as an endangered wildlife Class II due to its high value as a biological indicator species capable of judging environmental quality such as salinity, water flow, and ground conditions. However, basic research on its physiological and ecological characteristics is still lacking. As such, this study intended to examine the impact of environmental conditions such as salinity and soil particle size on the size and density of Clithon retropictus at the Yeoncho river estuary. The investigation of the salinity, which is a key variable that affects the distribution of organisms in the estuary, showed that Clithon retropictus could grow at a salinity ranging from 0#x2030; (freshwater) to 25‰ (brackish water). The coarse gravel (19-75mm) tended to increase nearer the upper stream (under the Yeoncho weir), while the proportion of particles smaller than sand (less than 19mm) increased toward the downstream. The population and the size of the individuals decreased rapidly in the downstream where water stagnated near the Yeoncho weir, and the salt water joined. The results indicated that Clithon retropictus had a high tolerance to salinity, but the adaptability was weaker toward the extremes since the population, and the size tended to decrease as the salinity increased. The correlation analysis revealed that both salinity and soil particle size affected the population and individual size. The correlation between the individual size and salinity was -0.242 (P <0.01), indicating that the size decreased with increasing salinity. The correlation between individual size and coarse gravel having a particle size of 19mm or more was 0.420 (P <0.01), indicating that the size increased with increasing the particle size.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.2
• /
• pp.69-79
• /
• 2019

The coastal area forms various sedimentary layers according to the environmental conditions such as the topography and geological features of the upper region of the river, ocean currents, and river mouth. Therefore, identifying the characteristics of the marine clay deposited in the coastal area plays a key role in the investigation of the formation of soft ground. In general, alluvial grounds are formed by a variety of factors such as changes in topography and natural environment, they have very diverse qualities depending on the deposited region or sedimentation conditions. The most important thing for the construction of social infrastructures in soft ground areas is economical and efficient treatment of soft ground. In this study, the author collected data from diverse laboratory and field tests on five areas in western and southern offshore with relatively high reliability, and then statistically analyzed them, thereby presenting standard constants for construction design. Correlation between design parameters such as over consolidation ratio, preconsolidation pressure was analyzed using linear and non-linear regression analyses. Also, proposed distribution characteristics of design parameters in consideration of each region's uncertainty through statistical analyses such as normality verification, outlier removal.

• Journal of Climate Change Research
• /
• v.3 no.2
• /
• pp.129-142
• /
• 2012

This study was carried out to evaluate carbon footprint during unhulled rice production and to compare mitigation technologies of methane, main carbon source during rice production, Carbon footprint of unhulled rice was a sum of $CO_2$ emission of agri-materials manufacture, rice cultivation and waste treatment. It was emitted 1.40 kg $CO_2$ during unhulled rice production, its distribution was 71.1% by $CH_4$ emission of rice cultivation, 11.8% of $N_2O$ emission by nitrogen application and 7.6% of complex fertilizer manufacture. $CH_4$ emission could be mitigated by some technologies; cultivation of the early maturing rice variety emitted lower by 44.4% than the mid maturing variety, intermittent drainage of submerged water by 43.8% than the continuous flooding condition, direct seeding by 32.0% than transplanting cultivation, no-ploughing by 20.9% than ploughing cultivation. It means that LCA on Global Warming Potential and the statistical data on innovated technical practice are key tools to systemize Measurable-Reportable-Verifiable (MRV) system for carbon footprint and carbon emission trade in the farm base.

• The Korean Journal of Archival Studies
• /
• no.60
• /
• pp.49-88
• /
• 2019

Today, the civil society plays a key role not only in criticizing and monitoring the functions of the state and the market, but also as an active producer of public services by complementing the government and the public sector. Public records management is also becoming more and more popular. In the case of appraisal and selection, which is the core area of record management, discussions about citizen participation are becoming more serious than any other areas. The concept of 'proactive appraisal', which has emerged as a paradigm of citizens' participation in appraisal, reminds us that citizens themselves are the subjects of public records and are no longer alienated from the appraisal system. The problem is, while the growth of the Korean civil society about institutional participation is spreading rapidly, but citizen participation is hard to find in the field of public records. The purpose of this paper is to examine the role of citizen participation in the process of appraisal of public records, and to debunk the role of citizen participation in the appraisal processes by exploring the examples in the UK, Canada, and Australia. This paper emphasizes that the appraisal system of the national public records in crisis today could be largely restored through the domestic application of this active citizen participation cases. First of all, this study presents a conceptual appraisal model that could reflect citizen participation in the field of record management along with the analyses of the advanced cases in some western countries. Specifically, this paper focuses on presenting the models of 'appraisal documentation' and 'governance-based appraisal', reflecting the active citizen participation. This study suggests that these citizens' participatory evaluation models should be settled in Korea in the future and we should urgently discuss 'citizen participation appraisal'.