• Journal of Energy Engineering
• /
• v.20 no.3
• /
• pp.224-230
• /
• 2011

For developing high performance fuel cell, peripheral devices and key components have to be studied in priority. In this study, centrifugal pump was studied for heat recovery. For PEM fuel cell system, a four-impeller centrifugal pump was designed, tested and compared with result of commercial product (IWAKI). In addition, effects of number of impeller were analyzed by CFD. The experiment and analysis were progressed in the same conditions. The results showed the quantitative difference under 30% between the numerical and the experimental pressure difference and mass flow rate.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2017.05a
• /
• pp.83-83
• /
• 2017

Electrorefining is a key step in pyroprocessing. The electrorefining process is generally composed of two recovery steps - the deposit of uranium onto a solid cathode and the recovery of the remaining uranium and TRU elements simultaneously by a liquid cadmium cathode. The solid cathode processing is necessary to separate the salt from the cathode since the uranium deposit in a solid cathode contains electrolyte salt. Distillation process was employed for the cathode processing. It is very important to increase the throughput of the salt separation system due to the high uranium content of spent nuclear fuel and high salt fraction of uranium dendrites. In this study, a mesh-covered crucible was investigated for the sat distillation of electrorefiner uranium deposits. A liquid salt separation step and a vacuum distillation step were combined for salt separation. The adhered salt in uranium deposits was efficiently removed in the mesh-covered crucible. The salt distiller was operated simply since repeated cooling - heating step was not necessary for the change of the crucible. The operation time could be reduced by the use of the mesh-covered crucible and the combined operation of the two steps. A method to preserve a vacuum level was proposed by double O-rings during the operation of the distiller with the mesh-covered crucible. After the salt distillation, the salt content was measured and was below 0.1wt% after the salt distillation. The residual salt after the salt distillation can be removed further during melting of uranium metal.

• Journal of Global Scholars of Marketing Science
• /
• v.19 no.4
• /
• pp.57-63
• /
• 2009

With an exponential increase in electronic commerce (e-commerce), marketers are attempting to gain a competitive advantage by emphasizing service quality and post interaction service aspects, which leads to customer satisfaction or behavioral consequence. Particularly for apparel, service quality is one of the key determinants in encouraging customer e-loyalty, and hence the success of apparel retailing in the context of electronic commerce. Therefore, this study explores e-service quality (E-SERVQUAL) factors and their unique effects on e-loyalty for apparel online shopping based on Parasuraman et al' s (2005) framework. Specific objectives of this study are to identify underlying dimension of E-SERVQUAL, and analyze a structural model for examining the effect of E-SERVQUAL on e-loyalty for online apparel shopping. For the theoretical framework of service quality in the context of online shopping, literatures on traditional and electronic service quality factors were comparatively reviewed, and two aspects of core and recovery services were identified. This study hypothesized that E-SERVQUAL has an effect on e-loyalty; customer satisfaction has a positive effect on e-service loyalty for apparel online shopping; and customer satisfaction mediates in the effect of E-SERVQUAL on e-loyalty for apparel online shopping. A self-administered questionnaire was developed based on literatures. A total of 252 usable questionnaires were obtained from online consumers who had purchase experience with online shopping for apparel products and reside in standard metropolitan areas, in the United States. Factor analysis (e.g., exploratory, confirmatory) was conducted to assess the validity and reliability and the structural equation model including measurement and structural models was estimated via LISREL 8.8 program. Findings showed that the E-SERVQUAL of shopping websites for apparel consisted of five factors: Compensation, Fulfillment, Efficiency, System Availability, and Responsiveness. This supports Parasuraman (2005)'s E-S-QUAL encompassing two aspects of core service (e.g., fulfillment, efficiency, system availability) and recovery related service (e.g., compensation, responsiveness) in the context of apparel shopping online. In the structural equation model, there are five exogenous latent variables for e-SERVQUAL factors; and two endogenous latent variables (e.g., customer satisfaction, e-loyalty). For the measurement model, the factor loadings for each respective construct were statistically significant and were greater than .60 and internal consistency reliabilities ranged from .85 to .88. In the estimated structural model of the e-SERVEQUAL factors, the system availability was found to have direct and positive effect on e-loyalty, whereas efficiency had a negative effect on e-loyalty for apparel online shopping. However, fulfillment was not a significant predictor for explaining consequences of E-SERVQUAL for apparel online shopping. This finding implies that perceived service quality of system available was likely to increase customer satisfaction for apparel online shopping. However, it was not supported that e-loyalty was determined by service quality, because service quality has an indirect effect on e-loyalty (i.e., repurchase intention) by mediating effect of value or satisfaction in the context of online shopping for apparel. In addition, both compensation and responsiveness were found to have a significant impact on customer satisfaction, which influenced e-loyalty for apparel online shopping. Thus, there was significant indirect effect of compensation and responsiveness on e-loyalty. This suggests that the recovery-specific service factors play an important role in maximizing customer satisfaction levels and then maintaining customer loyalty to the online shopping site for apparel. The findings have both managerial and research implications. Fashion marketers can establish long-term relationship with their customers based on continuously measuring customer perceptions for recovery-related service quality, such as quick responses to problem and returns, and compensation for customers' problem after their purchases. In order to maintain e-loyalty, recovery services play an important role in the first choice websites for consumers to purchase clothing. Given that online consumers may shop anywhere, a marketing strategy for improving competitive advantages is to provide better service quality, maximize satisfaction, and turn to creating customers' e-loyalty for apparel online shopping. From a researcher's perspective, there are some limitations of this research that should be considered when interpreting its findings. For future research, findings provide a basis for the further study of this important topic along both theoretical and empirical dimensions. Based on the findings, more comprehensive models for predicting E-SERVQUAL's consequences can be developed and tested. For global fashion marketing, this study can expand to a cross-cultural approach into e-service quality for apparel by including multinational samples.

• Journal of Chest Surgery
• /
• v.22 no.4
• /
• pp.525-547
• /
• 1989

Hemorrhagic tendency observed in open heart surgery patients has been attributed, among other causes, to increased fibrinolytic activity during extracorporeal circulation. But the exact mechanism of enhanced fibrinolytic activity which occurs during extracorporeal circulation is still unknown. So, we studied and compared the changes of parameters of fibrinolytic and protein C system according to time obtained from the plasma of 31 adult open heart surgery patients[EGG group] and 10 adult general thoracic surgery patients[control group], in order to confirm the hypothesis that the activated protein C system might affect the fibrinolytic system during extracorporeal circulation. In ECC group, the nature of the enhanced fibrinolytic activity that evolved during extracorporeal circulation was characterized by significant increase in fibrin degradation products[P < 0.01] and significant decrease in plasminogen and alpha2-antiplasmin[P < 0.05, P < 0.01] in spite of adequate amount of heparin administration. These changes were most pronounced in the early phase of extracorporeal circulation and normalized after termination of extracorporeal circulation. The results of these observations were the same after volume correction with the value of hematocrit. The change of volume corrected protein C ratio during extracorporeal circulation revealed similar pattern to those of plasminogen and alpha2-antiplasmin [P < 0.01], but volume corrected ratio of free protein S showed significant increase after the commencement of extracorporeal circulation then decreased after extracorporeal circulation. Although the above mentioned changes occur similarly in both bubble type oxygenator-used and membrane oxygenator-used patients groups, but the degree of decrease was more severe in membrane oxygenator-used patients group [P < 0.01] and showed much slower recovery to reach to the preextracorporeal circulation level. These results confirm the hypothesis that the enhanced fibrinolysis during extracorporeal circulation might be caused by the activation of protein C system and the activation is possibly linked to the appearance of thrombin from contact activation of blood after wide exposure to the synthetic surfaces of extracorporeal circuit. Key words: Extracorporeal circulation, Enhanced fibrinolysis, Protein C system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10A
• /
• pp.1546-1554
• /
• 1999

In this paper, Dynamic Fault Tree algorithm(DFT algorithm) is presented. This algorithm provides a concise representation of dynamic fault tolerance system including fault recovery techniques with fault detection, mask and switching function. And this algorithm define FDEP, CSP, SEQ, PAG gate which captures the dynamic characteristics of system. It show that this algorithm solved the constraints to satisfy the dynamic characteristics of system which there are in Markov and also this is able to satisfy the dynamic characteristics of system which there are in Markov and also this is able to covered the disadvantage of Fault tree methods. To show the key advantage of this algorithm, a traditional method, that is, Markov and Fault Tree, applies to TMR and Dual-Duplex systems with the dynamic characteristic and a presented method applies to those. He results proved that the DFT algorithm for solving the problems of the system is more effective than the Markov and Fault tree analysis model..

• Journal of Power Electronics
• /
• v.11 no.4
• /
• pp.606-611
• /
• 2011

Power electronics is a key technology for electric, hybrid, plug-in hybrid, and fuel cell vehicles. Typical power electronics converters used in electric drive vehicles include dc/dc converters, inverters, and battery chargers. New semiconductor materials such as silicon carbide (SiC) and novel topologies such as the Z-source inverter (ZSI) have a great deal of potential to improve the overall performance of these vehicles. In this paper, a Z-source inverter for fuel cell vehicle application is examined under three different scenarios. 1. a ZSI with Si IGBT modules, 2. a ZSI with hybrid modules, Si IGBTs/SiC Schottky diodes, and 3. a ZSI with SiC MOSFETs/SiC Schottky diodes. Then, a comparison of the three scenarios is conducted. Conduction loss, switching loss, reverse recovery loss, and efficiency are considered for comparison. A conclusion is drawn that the SiC devices can improve the inverter and inverter-motor efficiency, and reduce the system size and cost due to the low loss properties of SiC devices. A comparison between a ZSI and traditional PWM inverters with SiC devices is also presented in this paper. Based on this comparison, the Z-source inverter produces the highest efficiency.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.04b
• /
• pp.693-696
• /
• 2001

최근 네트워크 보안에 대한 사용이 증가하고 있다. 그러나 암호는 본래 가지고 있는 키 관리의 어려움 때문에 여러 가지 문제가 발생할 수 있다. 이러한 암호의 사용이 야기하는 역기능을 해소하고 순기능을 조장하기 위하여 키 복구 개념이 도입되었다. 이러한 키 복구 방법 중 본 논문에서는 캡슐화 방식을 사용한다. 하지만 이 방식에서의 문제점은 키 협상 부분에서 키 복구에 대한 부분도 협상해야 한다. 그렇기 때문에 복잡한 키 협상 자정이 더욱 복잡해지며 마찬가지 이유로 SPD(Security Policy Database) 역시 복잡해진다. 그리고 키 복구에 대한 정보를 정해진 시간을 주기로 계속 보내야 하기 때문에 네트워크 소스 역시 많이 소비된다. 이러한 점을 해결하고자 본 논문에서는 TOS(Type Of Service)의 4bit를 이용하여 한 번의 키 복구 정보를 보내고, 사용자가 이러한 서비스를 자신이 사용하고자 할 경우에만 선택할 수 있도록 함으로써 해결하였다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.3
• /
• pp.429-438
• /
• 2021

The mandatory installation of the ECDIS (Electronic Chart Display and Information System) became an important navigational equipment for navigation officer. In addition, ECDIS is a key component of the ship's digitalization in conjunction with various navigational equipment. Meanwhile, cyber-attacks emerge as a new threat along with digitalization. Damage caused by cyber-attacks is also reported in the shipping sector, and IMO recommends that cybersecurity guidelines be developed and included in International Security Management (ISM). This study analyzed the cybersecurity hazards of ECDIS, where various navigational equipment are connected. To this end, Importance-Performance Analysis (IPA) was conducted on navigation officer using ECDIS. As a result, the development of technologies for cyber-attack detection and prevention should be priority. In addition, policies related to 'Hardware and Software upgrade', 'network access control', and 'data backup and recovery' were analyzed as contents to be maintained. This paper is significant in deriving risk factors from the perspective of ECDIS users and analyzing their priorities, and it is necessary to analyze various cyber-attacks that may occur on ships in the future.

• Journal of the Korea Convergence Society
• /
• v.10 no.7
• /
• pp.281-287
• /
• 2019

Application of heat recovery system applying air supply and cexhaust ventilation device essential in energy management system for the optimum ventilation system utilization and energy saving. This is a key element of infrastructure technology for high-efficiency energy buildings, because it can save heating and cooling energy in winter and summer. In this paper, heat transfer efficiency was simulated using paper, plastic, and aluminum materials that was examined to compare heat exchanger performance under uniform flow conditions. We tested heat transfer efficiengy according to the shape of two of that, one is orthogonal and the other is refraction shape. Based on the simulation results, it is expected to contribute to the production of high performance heat exchanger with heat transfer performance and pressure loss.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.4
• /
• pp.617-624
• /
• 2022

The small electric vehicles equipped with V2X(vehicle to everything) systems may provide more information and function to the existing navigation system of the vehicle. The key components of V2X technology include V2V (vehicle to vehicle), V2N(vehicle to network) and V2I (vehicle to infrastructure). This study is to design and implementation of VI type E-PTO which is interfaced with external equipments, the work designs the components of E-PTO such as DC/DC converter, DC/AC converter, battery bidirectional charging system etc. Also, it implements the devices and control systems for driving. The test results of VI type E-PTO components showed allowable 10% requirements of transient voltage variation rate and recovery time within 100ms for start/stop and normal operation.