• Nuclear Engineering and Technology
• /
• 제53권3호
• /
• pp.842-850
• /
• 2021

Real Time Simulation (RTS) has long been used in the nuclear power industry for operator training and engineering purposes. And, Online Simulation (OLS) is based on RTS and with connection to the plant information system to acquire the measurement data in real time for calibrating the simulation models and following plant operation, for the purposes of analyzing plant events and providing indicative signs of malfunctioning. An OLS system has been developed to support PWR operations for CPR1000 plants. The OLS system provides graphical user interface (GUI) for operators to monitor critical plant operations for preventing faulty operation or analyzing plant events. Functionalities of the OLS system are depicted through the maneuvering of the GUI for various OLS functional modules in the system.

• KIEAE Journal
• /
• 제8권3호
• /
• pp.37-42
• /
• 2008

The purpose of this study was to comprehend specific characteristic of interface and present the standardized interface of Long Life Housing, which could be obtained by the total and various approaches. With this in mind we analyzed related studies of interface through previous studies, and based on the analysis we created standardized factors of categorization in view of characteristic of interface. Using these factors, we can determine whether the interface could be used systematically in Long Life Housing. And as these were presented in the form of Key Map for expedite the synthetic understanding of interface, we could easily reconize types of interface. Especially, we only dealt the wall of flexible interface of Long Life Housing. Throughout systemizing and standardizing works, we can expedite the understanding of interface of Long Life Housing and finally, we want to make basic data used for date base of interface which can be available for Long Life Housing.

• Geomechanics and Engineering
• /
• 제11권3호
• /
• pp.345-359
• /
• 2016

In order to investigate the influence of the interfacial angel on failure characteristics and mechanism of combined coal-rock mass, 35 uniaxial/biaxial compressive simulation tests with 5 different interfacial angels of combined coal-rock samples were conducted by PFC2D software. The following conclusions are drawn: (1) The compressive strength and cohesion decrease with the increase of interfacial angle, which is defined as the angle between structure plane and the exterior normal of maximum principal plane, while the changes of elastic modulus and internal friction angle are not obvious; (2) The impact energy index $K_E$ decreases with the increase of interfacial angle, and the slip failure of the interface can be predicted based on whether the number of acoustic emission (AE) hits has multiple peaks or not; (3) There are four typical failure patterns for combined coal-rock samples including I (V-shaped shear failure of coal), II (single-fracture shear failure of coal), III (shear failure of rock and coal), and IV (slip rupture of interface); and (4) A positive correlation between interfacial angle and interface effect is shown obviously, and the interfacial angle can be divided into weak-influencing scope ($0-15^{\circ}$), moderate-influencing scope ($15-45^{\circ}$), and strong-influencing scope (> $45^{\circ}$), respectively. However, the confining pressure has a certain constraint effect on the interface effect.

• 한국재료학회지
• /
• 제30권11호
• /
• pp.581-588
• /
• 2020

Reducing CO₂ into high value fuels and chemicals is considered a great challenge in the 21st century. Efficiently activating CO₂ will lead to an important way to utilize it as a resource. This article reviews the latest progress of g-C₃N₄ based catalysts for CO₂ reduction. The different synthetic methods of g-C₃N₄ are briefly discussed. Article mainly introduces methods of g-C₃N₄ shape control, element doping, and use of oxide compounds to modify g-C₃N₄. Modified g-C₃N₄ has more reactive sites, which can significantly reduce the probability of photogenerated electron hole recombination and improve the performance of photocatalytic CO₂ reduction. Considering the literature, the hydrothermal method is widely used because of its simple equipment and process and easy control of reaction conditions. It is foreseeable that hydrothermal technology will continue to innovate and usher in a new period of development. Finally, the prospect of a future reduction of CO₂ by g-C₃N₄-based catalysts is predicted.

• 한국재료학회지
• /
• 제31권6호
• /
• pp.345-352
• /
• 2021

In this study, Ni nanoparticle supported by graphene oxide (GO) (Ni-GO) is successfully synthesized through hydrothermal synthesis and calcination, and Cr(VI) is extracted from aqueous solution. The morphology and structure of Ni-GO composites are characterized by scanning electron microscopy (SEM), trans mission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). High-resolution transmission electron microscopy (HRTEM) and XRD confirms the high dispersion of Ni nanoparticle after support by GO. Loading Ni on GO can obviously enhance the stability of Ni-GO composites. It can be calculated from TGA that the mass percentage of Ni is about 60.67 %. The effects of initial pH and reaction time on Cr(VI) removal ability of Ni-GO are investigated. The results indicate that the removal efficiency of Cr(VI) is greater than that of bared GO. Ni-GO shows fast removal capacity for Cr(VI) (<25 min) with high removal efficiency. Dynamic experiments show that the removal process conforms to the quasi-second order model of adsorption, which indicates that the rate control step of the removal process is chemical adsorption. The removal capacity increases with the increase of temperature, indicating that the reaction of Cr(VI) on Ni-GO composites is endothermic and spontaneous. Combined with tests and characterization, the mechanism of Cr(VI) removal by rapidly adsorption on the surface of Ni-GO and reduction by Ni nanoparticle is investigated. The above results show that Ni-GO can be used as a potential remediation agent for Cr(VI)-contaminated groundwater.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제15권11호
• /
• pp.866-870
• /
• 2009

최근 터치스크린을 탑재한 휴대폰의 출시가 늘어나면서 기존의 모바일 게임 콘텐츠를 터치스크린 콘텐츠로 변환하여 재사용하고자 하는 요구가 증가하고 있다. 하지만, 기존에 개발된 콘텐츠는 터치스크린 인터페이스를 갖고 있지 않기 때문에 터치스크린 콘텐츠로 자동 변환하는 것은 매우 어려운 문제이다. 본 논문에서는 터치스크린 인터페이스가 없는 모바일 게임 콘텐츠에 대하여 키보드 인터페이스 정보를 이용하여 자동으로 터치스크린 인터페이스를 생성하는 방법을 제안한다. 이 방법은 콘텐츠에서 사용되는 키 이벤트의 종류를 분석하여 최적의 스크린 키보드 레이아웃을 구성하고, 터치스크린 이벤트에 대해 자동으로 대응되는 키 이벤트를 발생시켜 키보드 이벤트 핸들러가 실행되는 터치 스크린 인터페이스를 생성한다. 끝으로, 실험을 통해 콘텐츠에 최적화된 터치스크린 인터페이스가 생성됨을 확인한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.540-541
• /
• 2005

• Educational Technology International
• /
• 제18권1호
• /
• pp.49-71
• /
• 2017

The purpose of the study was to identify key design features of virtual reality with head-mounted displays (HMD) and touchless interface for the hearing-impaired and hard-of-hearing learners. The virtual reality based training program was aimed to help hearing-impaired learners in machine operating learning, which requires spatial understanding to operate. We developed an immersive virtual learning environment prototype with an HMD (Oculus Rift) and a touchless natural user interface (Leap Motion) to identify the key design features required to enhance virtual reality for the hearing-impaired and hard-of-hearing learners. Two usability tests of the prototype were conducted, which revealed that several features in the system need revision and that the technology presents an enormous potential to help hearing-impaired learners by providing realistic and immersive learning experiences. After the usability tests of hearing-impaired students' exploring the 3D virtual space, interviews were conducted, which also established that further revision of the system is needed, which would take into account the learners' physical as well as cognitive characteristics.

• Structural Engineering and Mechanics
• /
• 제86권1호
• /
• pp.139-156
• /
• 2023

The reinforced concrete lining in the hydraulic pressure tunnel tends to crack during the water-filling process. The lining will be detached from the surrounding rock due to the inner water exosmosis along concrete cracks. From the previous research achievements, the cohesive element is widely adopted to simulate the concrete crack but rarely adopted to simulate the lining-rock interface. In this study, the zero-thickness cohesive element with hydro-mechanical coupling property is not only employed to simulate the traditional concrete crack, but also innovatively introduced to simulate the lining-rock interface. Combined with the indirect-coupled method, the hydro-mechanical coupling algorithm of the reinforced concrete lining in hydraulic pressure tunnels is proposed and implemented in the finite element code ABAQUS. The calculated results reveal the cracking mechanism of the reinforced concrete lining, and match well with the observed engineering phenomenon.

• 대한인간공학회지
• /
• 제28권3호
• /
• pp.87-94
• /
• 2009

The aim of the study is to investigate the usability of wheel navigation key(WNK) recently adopted for the new models of mobile phone and MP3 product. In this study, an experiment was designed to evaluate the functional benefit of WNK by using a performance test. A questionnaire was also used to examine the personal preference. In results, a significant difference was found in performance time between wheel-type and button-type product. In general, the difference was more significant as subject's skill level was higher. In particular, the performance time was significantly shortened with the WNK when a searching task was required, but push button was an effective interface for simple search task among beginners. Therefore, the wheel navigation key can be used to improve the usability of product by reducing the searching time in mobile phone and mp3. For practical application, the user's level of skill needs to be considered to maximize the effect of interface when choosing WNK or push button.