• Journal of Power Electronics
• /
• 제19권5호
• /
• pp.1087-1098
• /
• 2019

In this paper, a detuning factor (DeFac) method is proposed to design the key parameters for optimizing the transfer power and efficiency of an Inductively Coupled Power Transfer (ICPT) system with primary-secondary side compensation. Depending on the robustness of the system, the DeFac method can guarantee the stability of the transfer power and efficiency of an ICPT system within a certain range of resistive-capacitive or resistive-inductive loads. A MATLAB-Simulink model of a ICPT system was built to assess the system's main evaluation criteria, namely its maximum power ratio (PR) and efficiency, in terms of different approaches. In addition, a magnetic field simulation model was built using Ansoft to specify the leakage flux and current density. Simulation results show that both the maximum PR and efficiency of the ICPT system can reach almost 70% despite the severe detuning imposed by the DeFac method. The system also exhibited low levels of leakage flux and a high current density. Experimental results confirmed the validity and feasibility of an ICPT system using DeFac-designed parameters.

• Smart Structures and Systems
• /
• 제31권6호
• /
• pp.585-599
• /
• 2023

Field monitoring techniques offer an attractive approach for understanding bridge behavior under in-service loads. However, the investigations on bridge behavior under high-speed train load using field monitoring data are limited. The focus of this study is to explore the structural behavior of an in-service long-span steel truss arch bridge based on field monitoring data. First, the natural frequencies of the structure, as well as the train driving frequencies, are extracted. Then, the train-induced bearing displacement and structural strain are explored to identify the effects of train loads and bearings. Subsequently, a sensitivity analysis is performed for the impact factor of strain responses with respect to the train speed, train weight, and temperature to identify the fundamental issues affecting these responses. Additionally, a similar sensitivity analysis is conducted for the peak acceleration. The results indicate that the friction force in bearings provides residual deformations when two consecutive trains are in opposite directions. In addition, the impact factor and peak acceleration are primarily affected by train speed, particularly near train speeds that result in the resonance of the bridge response. The results can provide additional insight into the behavior of the long-span steel truss bridges under in-service high-speed train loads.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
• /
• pp.143-146
• /
• 2003

In mobile Internet banking service through wireless local area network, security is a most important factor to consider. We describe the development of mobile banking service using Personal Digatal Assistant (PDA). In order to increase the strength of encryption, we adopted hybrid approach where both of the public key algorithm and the secret key algorithm are used during the transaction among PDA, banking server and authentication server.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 추계학술대회
• /
• pp.259-267
• /
• 2004

Enterprise must establish a properly competitive strategy according to environmental changes and international competitions. It is necessary to develop the strategy of competitive power for an efficient operation as well as system, industry, product and price competitions. This paper aims to propose a choice method of Competitive Power Key Factors which can be applied to unit parts and finished products, construction products, soft wear products based on Reliability.

• 정보처리학회논문지C
• /
• 제12C권7호
• /
• pp.949-958
• /
• 2005

이 논문에서 우리는 여러 사용자들이 동시에 세션키를 교환하는 키 교환 스킴에 대해서 연구한다. 이런 상황은 사용자들을 그래프 노드들로 표현하고 두 사용자간에 키를 만들어야 하는 상황을 에지로 표현하는 키 그래프에 의해서 묘사될 수 있다. 우리는 키 그래프에 있는 모든 에지들을 위한 세션키들을 하나의 세션에서 동시에 만드는 키 교환 스킴을 설계한다. 키 그래프를 위한 키 교환은 양자간 키 교환의 확장판이라고 할 수 있다. 우리는 양자간 키 교환 안전성 모델을 확장해서 키 그래프를 위한 키 교환 안전성 모델을 제안한다. 우리는 란수 직 산용 테크닉을 사용해서 두개의 키 그래프를 위한 키 교환 스킴을 설계하며 안전성을 증명한다. 우리가 제안하는 스킴들의 안전성은 decisional Diffie-Hellman 가정에 의존한다. 첫 번째 스킴은 일 라운드 키 교환 프로토콜이며 키 독립성을 보장한다. 두 번째 스킴은 일 라운드이며 전방위 안전성을 보장한다. 제안하는 두 가지 스킴들의 안전성은 모두 표준 모델에서 증명된다. 제안되는 프로토콜들은 최초의 다중 키 교환 프로토콜이며, 단순히 양자간 키 교환 프로토콜들을 반복 사용해서 키들을 만드는 것보다 훨씬 효율적이다. 예로서 한 사용자가 n명의 다른 사용자와 키를 만든다고 가정하자. 가장 단순한 프로토콜은 각각의 사용자들과의 키 교환을 위해서 양자간 키 교환을 사용하는 것으로서, 이 때는 계산량과 메시지 전송량이 n에 비례하게 된다. 제안되는 프로토콜들은 n개의 키를 만드는데 있어서 계산량은 n에 비례하나 전송되는 메시지의 양은 교환되는 키들의 수에 상관없이 일정하다.

• 품질경영학회지
• /
• 제34권4호
• /
• pp.22-32
• /
• 2006

In these days, most of Korean industries advocates and utilizes Six Sigma as an integrated innovation tool for all their business and manufacturing processes. Six Sigma is known to bring more financial and managerial achievements than other innovation methods and tools. However, such successes are not always guaranteed. To adopt and implement Six Sigma successfully, it is necessary to grasp and understand essential characteristics of Six Sigma and then identify suitable elements and complements in consideration of vision, strategies, capability, circumstance and environment of the company. Step by step implementation plan may be built based on those ingredients. This study is to find out key ingredients (KIs) of Six Sigma. Potential ingredients selected from previous studies of success factors and ingredients of Six Sigma and TQM, and criteria of quality awards like MBNQA, EFQM, Deming prize and Korean National Quality Awards (KNQA) are classified into 11 categories based on experts' opinion and affinity analysis: management leadership, belt system, training, six sigma system, compensation, organization, corporate culture, customer focused, project selection, management of project results, and managerial achievements. Irrelevant or ineffective potential ingredients are discarded using factor analysis for the questionnaires answered by champions, MBB's and BB's of 90 Korean companies that have more than 3 years experience of Six Sigma. Also from the factor analysis, 3 factors are derived for each categories respectively except the managerial achievement category. Those 11 categories and 30 factors are defined as KIs of Six Sigma. This study also reveals that there is difference according to enterprise size, type of business, and implementation time in terms of KI's, and prioritizes KI's that an enterprise to pursue Six Sigma successfully should consider according to its characteristics.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권2호
• /
• pp.149-154
• /
• 2005

Secretion of the expressed heterologous proteins can reduce the stress to the host cells and is beneficial to their recovery and purification. In this study, fed-batch cultures of Escherichia coli YK537 (pAET-8) were conducted in a 5-L fermentor for the secretory production of human epidermal growth factor (hEGF) whose expression was under the control of alkaline phosphatase promoter. The effects of feeding of glucose and complex nitrogen sources on hEGF production were investigated. When the fed-batch culture was conducted in a chemically de-fined medium, the cell density was 9.68 g/L and the secreted hEGF was 44.7 mg/L in a period of 60 h. When a complex medium was used and glucose was added in pH-stat mode, the secreted hEGF was improved to 345 mg/L. When the culture was fed with glucose at a constant specific rate of $0.25\;gg^{-1}h^{-1}$, hEGF reached 514 mg/L. The effects of adding a solution containing yeast extract and tryptone were further studied. Different rate of the nitrogen source feeding resulted in different levels of phosphate and acetic acid formation, thus affected hEGF expression. At the optimal feeding rate, hEGF production achieved 686 mg/L.

• The Korean Journal of Pain
• /
• 제34권1호
• /
• pp.47-57
• /
• 2021

Background: Lumbar disc herniation (LDH) is a common cause of radicular pain, but the mechanism is not clear. In this study, we investigated the engagement of toll-like receptor 4 (TLR4) and the nuclear factor-kappa B (NF-κB) in radicular pain and its possible mechanisms. Methods: An LDH model was induced by autologous nucleus pulposus (NP) implantation, which was obtained from coccygeal vertebra, then relocated in the lumbar 4/5 spinal nerve roots of rats. Mechanical and thermal pain behaviors were assessed by using von Frey filaments and hotplate test respectively. The protein level of TLR4 and phosphorylated-p65 (p-p65) was evaluated by western blotting analysis and immunofluorescence staining. Spinal microglia activation was evaluated by immunofluorescence staining of specific relevant markers. The expression of proand anti-inflammatory cytokines in the spinal dorsal horn was measured by enzyme linked immunosorbent assay. Results: Spinal expression of TLR4 and p-NF-κB (p-p65) was significantly increased after NP implantation, lasting up to 14 days. TLR4 was mainly expressed in spinal microglia, but not astrocytes or neurons. TLR4 antagonist TAK242 decreased spinal expression of p-p65. TAK242 or NF-κB inhibitor pyrrolidinedithiocarbamic acid alleviated mechanical and thermal pain behaviors, inhibited spinal microglia activation, moderated spinal inflammatory response manifested by decreasing interleukin (IL)-1β, IL-6, tumor necrosis factor-α expression and increasing IL-10 expression in the spinal dorsal horn. Conclusions: The study revealed that TLR4/NF-κB pathway participated in radicular pain by encouraging spinal microglia activation and inflammatory response.

• BMB Reports
• /
• 제45권3호
• /
• pp.153-158
• /
• 2012

Geft is a guanine nucleotide exchange factor, which can specifically activate Rho family of small GTPase by catalyzing the exchange of bound GDP for GTP. Geft is highly expressed in the excitable tissue as heart and skeletal muscle and plays important roles in many cellular processes, such as cell proliferation, migration, and cell fate decision. However, the in vivo role of Geft remains unknown. Here, we generated a Geft conditional knockout mouse by flanking exons 5-17 of Geft with loxP sites. Cre-mediated deletion of the Geft gene in heart using Mef2c-Cre transgenic mice resulted in a dramatic decrease of Geft expression. Geft knockout mice develop normally and exhibit no discernable phenotype, suggesting Geft is dispensable for the development of the second heart field in mouse. The Geft conditional knockout mouse will be a valuable genetic tool for uncovering the in vivo roles of Geft during development and in adult homeostasis.

• Safety and Health at Work
• /
• 제7권4호
• /
• pp.347-353
• /
• 2016

Background: This study aimed to investigate the relation between key strike forces and musculoskeletal symptoms (MSS). Moreover, this study presents a key strike force measurement method to be used in a workplace setting. The correlation between key strike force characteristics and MSS was previously studied, but the measurement methods used either a single-key switch or force platforms applied under the keyboard. Most of the studies were conducted in a laboratory setting. The uniqueness of measurement methods in the current study is their ability to measure forces applied to a specific key in a workplace setting and to provide more information about specific key strike forces during typing. Methods: Twenty-four healthy computer workers were recruited for the study. The demographic questionnaire, and self-reported questionnaires for psychosocial status (General Nordic Questionnaire for Psychological and Social Factors at Work) and for detecting MSS were filled up, which later helped in dividing the participants into two groups (12 participants with pain and 12 without pain). Participants typed a predetermined text that utilized the instrumented keys multiple times. The dynamic forces applied to the keys were recorded and collected, using four thin and flexible force sensors attached to the preselected keys according to their location. Results: The results demonstrated that participants with high levels of MSS, specifically in the back and neck, in the last year exerted significantly higher key strike forces than those with lower levels of symptoms (p < 0.005). Conclusion: The key strike force exerted while typing on a keyboard may be a risk factor for MSS, and should therefore be considered in ergonomic evaluations and interventional programs.