• Journal of the Korean Ceramic Society
• /
• v.56 no.6
• /
• pp.589-595
• /
• 2019

The top-seeded solution growth (TSSG) method is an effective approach for the growth of high-quality SiC single crystals. In this method, the temperature gradient in the melt is the key factor determining the crystal growth rate and crystal quality. In this study, the effects of the aperture at the top of the hot-zone on the growth of the SiC single crystal obtained using the TSSG method were evaluated using multiphysics simulations. The temperature distribution and C concentration profile in the Si melt were taken into consideration. The simulation results showed that the adjustment of the aperture at the top of the hot-zone and the temperature gradient in the melt could be finely controlled. The surface morphology, crystal quality, and polytype stability of the grown SiC crystals were investigated using optical microscopy, high-resolution X-ray diffraction, and micro-Raman spectroscopy, respectively. The simulation and experimental results suggested that a small temperature gradient at the crystal-melt interface is suitable for growing high-quality SiC single crystals via the TSSG method.

• International Journal of CAD/CAM
• /
• v.7 no.1
• /
• pp.1-10
• /
• 2007

The compression of CAD models is a key technology for realizing Internet-based collaborative product development because big model sizes often prohibit us to achieve a rapid product information transmission. Although there exist some algorithms for compressing discrete CAD models, original precise CAD models are focused on in this paper. Here, the characteristics of hierarchical structures in CAD models and the distribution of their redundant data are exploited for developing a novel data encoding method. In the method, different encoding rules are applied to different types of data. Geometric data is a major concern for reducing model sizes. For geometric data, the control points of B-spline curves and surfaces are compressed with the second-order predictions in a local coordinate system. Based on analysis to the distortion induced by quantization, an efficient method for computation of the distortion is provided. The results indicate that the data size of CAD models can be decreased efficiently after compressed with the proposed method.

• Mycobiology
• /
• v.47 no.2
• /
• pp.191-199
• /
• 2019

Most of lichens are formed by Ascomycota, less than 1% are lichenized Basidiomycota. The flora investigation of lichenized Ascomycota of South Korea has been well studied in the past three decades; however, prior to this study, none of basidiolichens was discovered. During the recent excursion, an unexpected clavarioid basidiolichen, Sulzbacheromyces sinensis was collected. Morphology and ecology has been recorded in detail. DNA was extracted, and ITS, 18S, 28S nuclear rDNA were generated. In order to further confirm the systematic position of the Korean specimens, maximum likelihood and Bayesian inference analysis including all the species of the order Lepidostromatales were conducted based on the ITS. As a result, the phylogenetic tree of the order Lepidostromatales was reconstructed, which differed from the previous studies. The inferred phylogenetic tree showed that species of Sulzbacheromyces in three different continents (Asia, South Africa and South America) were separated into three clades with support. In this study, the species worldwide distribution map of Lepidostromatales was illustrated, and S. sinensis had a widest distribution range (paleotropical extend to the Sino-Japanese) than other species (paleotropical or neotropical). Prior to this study, the range of distribution, southernmost and northernmost points and the fruiting time of S. sinensis were recorded, and the genus Sulzbacheromyces was firstly reported from Korean peninsula and Philippines.

• Nuclear Engineering and Technology
• /
• v.55 no.11
• /
• pp.4274-4281
• /
• 2023

Blanket is of vital importance for engineering application of the fusion reactor. Nuclear heat deposition in materials is the main heat source in blanket structure. In this paper, the three-dimensional method for thermal-hydraulics/neutronics coupling analysis is developed and applied for the full-scale module of the helium-cooled ceramic breeder tritium breeding blanket (HCCB TBB) designed for China Fusion Engineering Test Reactor (CFETR). The explicit coupling scheme is used to support data transfer for coupling analysis based on cell-to-cell mapping method. The coupling algorithm is realized by the user-defined function compiled in Fluent. The three-dimensional model is established, and then the coupling analysis is performed using the paralleled Coupling Analysis of Thermal-hydraulics and Neutronics Interface Code (CATNIC). The results reveal the relatively small influence of the coupling analysis compared to the traditional method using the radial fitting function of internal heat source. However, the coupling analysis method is quite important considering the nonuniform distribution of the neutron wall loading (NWL) along the poloidal direction. Finally, the structure optimization of the blanket is carried out using the coupling method to satisfy the thermal requirement of all materials. The nonlinear effect between thermal-hydraulics and neutronics is found during the blanket structure optimization, and the tritium production performance is slightly reduced after optimization. Such an adverse effect should be thoroughly evaluated in the future work.

• Journal of The Korean Astronomical Society
• /
• v.29 no.1
• /
• pp.75-81
• /
• 1996

We mapped the $^{13}CO$ line in the dark nebula L134 using the 14-m Taeduck radio telescope with a 57 arcsec beam and one beam spacing. The cloud has a spherical shape with an intensity peak ridge extended from the northwest to the southeast directions. The halfwidth and the radial velocity of the lines peak at the region of the cloud center. The radial velocity decreases from the cloud center towards the north and south directions. The integrated line intensity distributions in the space-velocity plane show some structure and a velocity gradient. The $^{13}CO$ and $H_2CO$ clouds and dark clouds are closely related in space in shape, outer boundary, and intensity peak positions. The $^{13}CO$ integrated line intensity is linearly proportional to the visual extinction.

• Geomechanics and Engineering
• /
• v.38 no.2
• /
• pp.179-189
• /
• 2024

This paper presents a geomechanical framework for designing and optimizing layout patterns of cutterheads for rock Tunnel Boring Machines (TBMs), aiming to enhance their engineering performance. By examining the forces and moments exerted by rock, the study addresses geometric constraints associated with cutter boxes in key regions of the cutterhead, including the center, face, and gage areas, as well as the three-dimensional effects of cutterhead curvature on the geometric constraints of the back of the cutter boxes in the gage area. Novel formulas are proposed for determining the center points of cutter boxes and calculating both the minimum angular spacing and distance spacing between consecutive cutter boxes along a spiral path. The paper outlines an optimized layout design process for four cutterhead configurations: random, random paired, radial, and double spiral designs. Examples are provided to illustrate the results of applying these designs. The findings underscore the efficacy of the proposed methods in achieving a uniform and symmetrical distribution of cutters and buckets on the cutterhead surface. This approach effectively eliminates boundary overlap and minimizes unbalanced forces and moments. From a geomechanical standpoint, this framework offers a robust strategy for enhancing the performance and reliability of TBM cutterheads in rock tunneling operations.

• Korean Journal of Human Ecology
• /
• v.23 no.1
• /
• pp.101-122
• /
• 2014

In this study, the Pine & Gilmore(1998) and Schmitt(1999, 2003), based on previous studies. Recent trends in large department stores and distribution outlets, discount stores and large retail centers, such as the consumer's experience is divided into internal and external fashion brand stores navigation study. Fashion Brand Stores are defined as the inside of the fashion brand store of the form that sells only the products of a fashion company's brand. Meanwhile, shopping center is defined as all the places at the inside and out of the shopping center excluding the inside of the fashion brand store. Likewise, definitions are clarified as such for use. As for the research method for this study, semi-structured focus group interviews were used since they could provide many more data compared to in-depth interviews. Accordingly, data was collected while carrying out free discussions while two to three subjects listened to each other's opinion regarding the key words raised by the interviewer and while thinking about their experience at the inside and outside of the fashion brand stores. As for the subjects, female consumers between the ages of 20 and 50 were targeted, and the interviews conducted with four, seven, four and three women in their 20s, 30s, 40s and 50s, were used, respectively. Likewise, there were a total of 18 subjects. Exploratory Study of Customer Experience area was classified into integration of significance and categorization. In particular, the contents were classified into elements of experience inside the fashion brand stores and fashion brand stores outsider experience in the shopping center elements and the elements of the common experience of fashion stores and shopping centers based on the results concerning the key contents identified in-depth from the customer aspect. The key experience elements at the inside of fashion brand stores were identified as VMD experience, emotional experience, and experience of the service provided by sales representatives. As for the key experience elements at the shopping center which is at the outside of the fashion brand store, they included service scape experience, cultural event experience, playful behavior experience. Meanwhile, elements of common experience included educational experience and exclusivity experience and human respect experience, which demonstrated some difference in terms of the contents.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.9
• /
• pp.1430-1438
• /
• 2019

Objective: This experiment was designed to determine the effects of coated cysteamine hydrochloride (CC) on muscle fiber characteristics, amino acid composition and transporters gene expression in the longissimus dorsi muscle (LDM) of finishing pigs. Methods: Two hundred and sixteen Duroc/Landrace/Yorkshire cross-bred male finishing pigs were fed with a corn-soybean basal diet supplemented with 0, 70, and 140 mg/kg cysteamine. Each group contained eight replicates of nine pigs per replicate. After 29 days, one pig was randomly selected from each replicate and slaughtered. Blood and LDM samples were collected and analyzed. Results: The results showed that supplemental dietary CC increased (p<0.05) the muscle fiber density. And CC supplementation also up-regulated (p<0.05) the expression of myosin heavy chain 1 (MyHC1) and MyHC2x mRNA levels, and down-regulated (p<0.05) MyHC2b expression in the LDM. Additionally, supplemental dietary CC reduced (p<0.05) the concentration of total cholesterol in the plasma and enhanced (p<0.05) the concentrations of essential amino acid and total amino acid in the LDM. The relative expression levels of chloramphenicol acetyltransferase 2, $b^{0,+}$ amino acid transporter, and $y^+$-L-type amino acid transporter 1 were upregulated (p<0.05) in the LDM when pigs were fed with the dietary CC of 70 mg/kg. Conclusion: Cysteamine supplementation could increase fiber density and distribution of fiber types. It also improved the deposition of protein in the LDM by up-regulated the expression of amino acid transporters.

• Nuclear Engineering and Technology
• /
• v.54 no.2
• /
• pp.666-673
• /
• 2022

The optimization of a transmission type bremsstrahlung conversion target was carried out with Monte Carlo code FLUKA for intense pulsed electron beams with electron energy of several hundred keV for maximum photon fluence. The photon emission intensity from electrons with energy ranging from 300 keV to 1 MeV on tungsten, tantalum and molybdenum targets was calculated with varied target thicknesses. The research revealed that higher target material element number and electron energy leads to increased photon fluence. For a certain target material, the target thickness with maximum photon emission fluence exhibits a linear relationship with the electron energy. With certain electron energy and target material, the thickness of the target plays a dominant role in increasing the transmission photon intensity, with small target thickness the photon flux is largely restricted by low energy loss of electrons for photon generation while thick targets may impose extra absorption for the generated photons. The spatial distribution of bremsstrahlung photon density was analyzed and the optimal target thicknesses for maximum bremsstrahlung photon fluence were derived versus electron energy on three target materials for a quick determination of optimal target design.

• Geomechanics and Engineering
• /
• v.28 no.3
• /
• pp.299-311
• /
• 2022

Water-resisting key stratum (WKS) between coal seams is an important barrier that prevents water inrush from goaf in roof under multi-seam mining. The occurrence of water inrush can be evaluated effectively by analyzing the fracture of WKS in multi-seam mining. A "long beam" water inrush mechanical model was established using the multi-seam mining of No. 2+3 and No. 8 coal seams in Xiqu Mine as the research basis. The model comprehensively considers the pressure from goaf, the gravity of overburden rock, the gravity of accumulated water, and the constraint conditions. The stress distribution expression of the WKS was obtained under different mining distances in No. 8 coal seam. The criterion of breakage at any point of the WKS was obtained by introducing linear Mohr strength theory. By using the mechanical model, the fracture of the WKS in Xiqu Mine was examined and its breaking position was calculated. And the risk of water inrush was also evaluated. Moreover, breaking process of the WKS was reproduced with Flac3D numerical software, and was analyzed with on-site microseismic monitoring data. The results showed that when the coal face of No. 8 coal seam in Xiqu Mine advances to about 80 m ~ 100 m, the WKS is stretched and broken at the position of 60 m ~ 70 m away from the open-off cut, increasing the risk of water inrush from goaf in roof. This finding matched the result of microseismic analysis, confirming the reliability of the water inrush mechanical model. This study therefore provides a theoretical basis for the prevention of water inrush from goaf in roof in Xiqu Mine. It also provides a method for evaluating and monitoring water inrush from goaf in roof.