• Nuclear Engineering and Technology
• /
• v.53 no.5
• /
• pp.1556-1568
• /
• 2021

The plate-type fuel assembly adopted in nuclear research reactor suffers from complicated effect induced by non-uniform irradiation, which might affect stress conditions, mechanical behaviors and thermal-hydraulic performance of the fuel assembly. This paper is the Part II work of a two-part study devoted to analyzing the complex unique mechanical deformation and thermal-hydraulic characteristics for the typical plate-type fuel assembly under irradiation effect, which is on the basis of developed and verified numerical thermal-fluid-structure coupling methodology under irradiation in Part I of this work. The mechanical deformation, thermal-hydraulic performance and Mises stress have been analyzed for the typical plate-type fuel assembly consisting of support plates under non-uniform irradiation. It was interesting to observe that: the plate-type fuel assembly including the fuel plates and support plates tended to bend towards the location with maximum fission rate; the hot spots in the fuel foil appeared at the location with maximum thickness increment; the maximum Mises stress of fuel foil was located at the adjacent location with the maximum plate thickness increment et al.

• Smart Structures and Systems
• /
• v.17 no.6
• /
• pp.1107-1127
• /
• 2016

Studies on dynamic characteristics of the hanger vibration using field monitoring data are important for the design and evaluation of high-speed railway truss arch bridges. This paper presents an analysis of the hanger's dynamic displacement responses based on field monitoring of Dashengguan Yangtze River Bridge, which is a high-speed railway truss arch bridge with the longest span throughout the world. The three vibration parameters, i.e., dynamic displacement amplitude, dynamic load factor and vibration amplitude, are selected to investigate the hanger's vibration characteristics in each railway load case including the probability statistical characteristics and coupled vibration characteristics. The influences of carriageway and carriage number on the hanger's vibration characteristics are further investigated. The results indicate that: (1) All the eight railway load cases can be successfully identified according to the relationship of responses from strain sensors and accelerometers in the structural health monitoring system. (2) The hanger's three vibration parameters in each load case in the longitudinal and transverse directions have obvious probabilistic characteristics. However, they fall into different distribution functions. (3) There is good correlation between the hanger's longitudinal/transverse dynamic displacement and the main girder's transverse dynamic displacement in each load case, and their relationships are shown in the hysteresis curves. (4) Influences of the carriageway and carriage number on the hanger's three parameters are different in both longitudinal and transverse directions; while the influence on any of the three parameters presents an obvious statistical trend. The present paper lays a good foundation for the further analysis of train-induced hanger vibration and control.

• Journal of the Ergonomics Society of Korea
• /
• v.23 no.3
• /
• pp.25-38
• /
• 2004

Selection of a key dimension (s) by considering the characteristics of hand dimensions is needed to design gloves and construct a sound sizing system for gloves The present study identified key dimensions of glove design by analyzing the relationships between hand dimensions and demonstrated the construction process of a glove sizing system. By conducting correlation and regression analyses on 70 hand dimensions including 3 key dimension candidates (hand length; hand circumference; hand breadth) with the 1988 US Army data, hand length and hand circumference were selected as key dimensions for glove design. Glove sizing systems were constructed for males and females by applying the selected key dimensions, 0.5 inch of sizing intervals, and 2％ of presence rate criterion to the US Army data. This study suggests that glove sizing systems for males and females be very different from each other and a glove sizing system for males include more sizes than that for females.

• Convergence Security Journal
• /
• v.10 no.3
• /
• pp.29-41
• /
• 2010

Survelliance and Reconnaissance Sensor Network(SRSN) which can collect various tactical information within battlefield in real time plays an important role in NCW environment, of sensor to shooter architecture. However, due to the resource-limited characteristics of sensor nodes and the intrinsic attributes of sensor network such as wireless communication, the SRSN may be vulnerable to various attacks compared to traditional networks. Therefore, in this paper, we propose a new group key management scheme to guarantee confidentiality, integrity, availability, and authentication during the operation of the SRSN. Proposed scheme generates and distributes the group key based on the topological characteristic of the SRSN and the probabilistic key sharing. The communication cost for distributing the group key is O(logn).

• Genes and Genomics
• /
• v.40 no.11
• /
• pp.1137-1148
• /
• 2018

Freshwater gobies Rhinogobius cliffordpopei and R. giurinus are invasive species with particular concern because they have become dominant and were fierce competitors in the invaded areas in Yunnan-Guizhou Plateau (southwest of China). Information about genetic characteristics of R. giurinus have been published, but there were still no relevant reports about R. cliffordpopei. In present study, the complete mitochondrial genome of R. cliffordpopei was determined, which was 16,511 bp in length with A+T content of 51.1%, consisting of 13 protein-coding genes, 22 tRNAs, 2 ribosomal RNAs, and a control region. The gene composition and the structural arrangement of the R. cliffordpopei complete mtDNA were identical to most of other teleosts. Phylogenetic analyses placed R. cliffordpopei in a well-supported monophyletic cluster with other Rhinogobius fish. But the phylogenetic relationship between genus Rhinogobius and Tridentiger remained to be resolved.

• Journal of Power Electronics
• /
• v.19 no.3
• /
• pp.827-834
• /
• 2019

Wireless power transfer via coupled magnetic resonances has been a hot research topic in recent years. In addition, the number of related devices has also been increasing. However, reverse signals transfer is often required in addition to wireless power transfer. The structure of the circuit for a wireless power transfer system via coupled magnetic resonances is analyzed. The advantages and disadvantages of both parallel compensation and series compensation are listed. Then the compensation characteristics of the inductor, capacitor and resistor were studied and an appropriate compensation method was selected. The reverse signals can be transferred by controlling the compensation of the resistor. In addition, it can be demodulated by extracting the change of the primary current. A 3.3 MHz resonant frequency with a 100 kHz reverse signals transfer system platform was established in the laboratory. Experimental results demonstrate that wireless power and reverse signals can be transferred synchronously.

• Current Optics and Photonics
• /
• v.8 no.1
• /
• pp.86-96
• /
• 2024

This research investigation employs a terahertz (THz) time-domain spectroscopy system to study the terahertz spectral characteristics of five different citrates in both solution and solid state. The citrates under examination are lithium citrate, monosodium citrate, disodium citrate, trisodium citrate, and potassium citrate. The results show that the THz absorption coefficients of the first four citrate solutions exhibit a decreasing trend with increasing concentration. However, the potassium citrate solution shows an opposite phenomenon. At the same time, the absorption coefficients of lithium citrate, trisodium citrate, and potassium citrate solutions are compared at the same concentration. The results indicate that the absorption coefficient of citrate solution increases in proportion to the increase of metal cation radius, which is explained from the perspective of the influence of metal cations on hydrogen bonds. In addition, we also study the absorption peaks of solid citrates, and characterize the formation mechanism of the absorption peaks by molecular dynamics simulations. This methodology can be further extended to the study of multitudinous salts, presenting theoretical foundations for the detection in food and medicine industries.

• Journal of Veterinary Science
• /
• v.23 no.5
• /
• pp.63.1-63.14
• /
• 2022

Background: Chicken anemia virus (CAV) causes chicken infectious anemia, which results in immunosuppression; the virus has spread widely in chicken flocks in China. Objectives: The aim of this study was to understand recent CAV genetic evolution in chicken flocks in Guangxi Province, southern China. Methods: In total, 350 liver samples were collected from eight commercial broiler chicken farms in Guangxi Province in southern China from 2018 to 2020. CAV was detected by conventional PCR, and twenty CAV complete genomes were amplified and used for the phylogenetic analysis and recombination analysis. Results: The overall CAV-positive rate was 17.1%. The genetic analysis revealed that 84 CAVs were distributed in groups A, B, C (subgroups C1-C3) and D. In total, 30 of 47 Chinese CAV sequences from 2005-2020 belong to subgroup C3, including 15 CAVs from this study. There were some specific mutation sites among the intergenotypes in the VP1 protein. The amino acids at position 394Q in the VP1 protein of 20 CAV strains were consistent with the characteristics of a highly pathogenic strain. GX1904B was a putative recombinant. Conclusions: Subgroup C3 was the dominant genotype in Guangxi Province from 2018-2020. The 20 CAV strains in this study might be virulent according to the amino acid residue analysis. These data help improve our understanding of the epidemiological trends of CAV in southern China.

• Nuclear Engineering and Technology
• /
• v.53 no.6
• /
• pp.1834-1845
• /
• 2021

Liquid lead-bismuth cooled fast reactor is one of the most promising reactor types among the fourth-generation nuclear energy systems. The flow and heat transfer characteristics of lead-bismuth eutectic (LBE) are completely different from ordinary fluids due to its special thermal properties, causing that the traditional Reynolds analogy is no longer recommended and appropriate. More accurate turbulence flow and heat transfer model for the liquid metal lead-bismuth should be developed and applied in CFD simulation. In this paper, a specific CFD solver for simulating the flow and heat transfer of liquid lead-bismuth based on the k - 𝜀 - k_𝜃 - 𝜀_𝜃 model was developed based on the open source platform OpenFOAM. Then the advantage of proposed model was demonstrated and validated against a set of experimental data. Finally, the simulation of LBE turbulent flow and heat transfer in a 7-pin wire-wrapped rod bundle with the k - 𝜀 - k_𝜃 - 𝜀_𝜃 model was carried out. The influence of wire on the flow and heat transfer characteristics and the three-dimensional distribution of key thermal hydraulic parameters such as temperature, cross-flow velocity and Nusselt number were studied and presented. Compared with the traditional SED model with a constant Pr_t = 1.5 or 2.0, the k - 𝜀 - k_𝜃 - 𝜀_𝜃 model is more accurate on predicting the turbulence flow and heat transfer of liquid lead-bismuth. The average relative error of the k - 𝜀 - k_𝜃 - 𝜀_𝜃 model is reduced by 11.1% at most under the simulation conditions in this paper. This work is meaningful for the thermal hydraulic analysis and structure design of fuel assembly in the liquid lead-bismuth cooled fast reactor.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.11 no.3
• /
• pp.211-216
• /
• 2011

The detection of defective parts in a factory is usually performed by the human eye. Therefore, heavy manpower is in demand for minor enterprises. An image processing system is desired to solve this drawback. However, due to the variety of the products characteristics, an general algorithm is needed that can adapt to these characteristics. Therefore, in this paper, the key pad parts' characteristics which need to be dealt with are analyzed in order to embody the image processing algorithm that is suggested. The experimental results show the probability of detecting a defective part is 95% with a detection time of 0.203 seconds, on the average.