• 제목/요약/키워드: Kerosene properties

검색결과 53건 처리시간 0.024초

Determination of trace icing Inhibitors (ether type) in free-floating fuels by gas chromatography-mass spectrometry

  • Shin, Ho-Sang;Ahn, Hye-Sil;Jung, Dong-Gyun
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2003년도 총회 및 춘계학술발표회
    • /
    • pp.196-200
    • /
    • 2003
  • A gas chromatography/mass spectrometric assay method was developed for the simultaneous determination of ethylene glycol monomethyl ether (EGME) and diethylene glycol monomethyl ether (DEGME) in spilled aviation fuels. Ethylene glycol monobutyl ether (EGBE) and ethylene glycol monoethyl ether (EGEE) were used as internal standard and surrogate, respectively. The sample preparation consists of back-extraction with 7 mL of methylene chloride after extraction of 50 mL of fuel with 2 mL of water. The extract was concentrated to dryness and dissolved with 100L of methanol and analyzed by CC-MS (SIM). The peaks had good chromatographic properties by using semi-polar column and the extraction of these compounds from fuel also gave high recoveries of 75 and 85 % with small variations for EGME and DEGME, respectively. Method detection limits were 1.3 ng/mL for EGME and 1.0 ng/mL for DEGME in spilled fuel. The method may be useful for fuel-type differentiation between kerosene and JP-8, which may originate from the storage tank.

  • PDF

온실(溫室) 난방(暖房)을 위한 태양열(太陽熱)-지하(地下) 잠열(潛熱) 축열(蓄熱) 시스템 개발(開發) (Development of Solar Energy-Underground Latent Heat Storage System for Greenhouse Heating)

  • 송현갑;류영선
    • Journal of Biosystems Engineering
    • /
    • 제19권3호
    • /
    • pp.211-221
    • /
    • 1994
  • In this study, to maximize the solar energy utilization for greenhouse heating during the winter season, solar energy-underground latent heat storage system was constructed, and the thermal performance of the system has been analyzed to obtain the basic data for realization of greenhouse solar heating system. The results are summarized as follows. 1. $Na_2SO_4{\cdot}10H_20$ was selected as a latent heat storage material, its physical properties were stabilized and the phase change temperature was controlled at $13{\sim}15^{\circ}C$. 2. Solar radiation of winter season was the lowest value in December, and Jinju area was the highest and the lowest value was shown in Jeju area. 3. The minimum inner air temperature of greenhouse with latent heat storage system(LHSS) was $7.0{\sim}7.5^{\circ}C$ higher than that of greenhouse without LHSS and was $7.0{\sim}11.2^{\circ}C$ higher than the minimum ambient air temperature. 4. Greenhouse heating effect of latent heat storage system was getting higher according to the increase of solar radiation and was not concerned with the variation of minimum ambient air temperature. 5. The relative humidity of greenhouse with latent heat storage system was varied from 50 to 85%, but that of greenhouse without LHSS was varied from 30 to 93%. 6. The heating cost of greenhouse with solar energy-latent heat storage system was about 24% of that with the kerosene heating system.

  • PDF

점도 변화에 따른 유류오염 모래의 역학적 특성 (Mechanical Properties of Oil Pollution Sand Due to Changes in the Viscosity of Oil)

  • 홍승서;배규진;김영석
    • 지질공학
    • /
    • 제25권4호
    • /
    • pp.577-585
    • /
    • 2015
  • 본 연구에서는 유류로 오염된 모래의 지반공학적 특성에 대하여 분석하였다. 오염물로 사용한 유류는 점도특성을 고려하여 등유, 원유, 자동차 엔진오일을 선정하였고, 모형지반은 주문진 표준사를 사용하였다. 실내시험은 다짐시험, 투수시험, 직접전단시험을 유류의 오염비율에 따라 수행하였다. 투수시험에서 유류의 함유비가 증가할수록 오염되지 않은 지반에 비해 투수계수가 점진적으로 저하되었다. 내부마찰각은 오염되지 않은 지반보다 상대적으로 감소하였다.

비산재로부터 유용성분을 회수하는 청정부유선별공정 (Clean Flotation Process to Recycle useful Materials from Fly Ash)

  • 한광수;김둘선;이동근
    • 청정기술
    • /
    • 제26권3호
    • /
    • pp.177-185
    • /
    • 2020
  • 본 연구에서는 석탄화력발전소에서 전량 폐기되고 있는 석탄재의 재활용 방안으로 석탄회의 80%를 차지하고 있는 비산재로 부터 유용성분을 회수하고 이를 산업재로 활용하기 위한 청정부유선별 공정을 개발하였다. 비산재로부터 미연탄소(unburned carbon, UC) 를 회수하기 위해 비이온성 포수제인 등유 대신에 친환경 식물성 오일인 대두유를 사용하여 등유로부터 악취 발생을 예방하였고 부유선별 후 잔류물로부터 CM (ceramic microsphere)과 CA (cleaned ash)를 분리하기 위해 황산용액을 사용하지 않고 hydro-cyclone를 사용함으로써 산성폐수를 발생시키지 않고 미립의 CM를 회수할 수 있었다. 등유를 포수제로 사용하여 UC를 분리할 때 보다 대두유를 포수제로 사용하였을 때, 대두유의 높은 점성으로 인한 UC의 흡착성 증가와 대두유에 포함된 리놀레산에 의해 부유성 향상으로 UC의 회수율이 85.8%로 높게 나타났다. 회수된 UC에 포함된 연소가능성분(combustible component, CC)은 모두 탄소성분으로 대두유를 사용하였을 때 탄소의 함량이 높게 나타났으며, 회수된 UC는 표면이 거칠면서 기공이 많아 분쇄가 쉬워 미립화로 산업용 소재로 활용할 수 있을 것이다. Hydro-cyclone을 이용한 입도선별 청정분리공정에 의해 회수된 CM과 CA는 구형 형상으로 입자들이 서로 뭉치지 않고 뚜렷하게 분리되었으며 입자의 평균직경(D50)은 5 ㎛로 미세하여 공정변경에 의한 CM의 미립화를 구현할 수 있었다.

삭마 효과에 대한 CNT-페놀 나노복합재료의 미세구조 분석 (Microstructure and Ablation Performance of CNT-phenolic Nanocomposites)

  • 왕작가;권동준;박종규;이우일;박종만
    • Composites Research
    • /
    • 제26권5호
    • /
    • pp.309-314
    • /
    • 2013
  • 소량의 CNT 나노입자를 함유한 CNT-페놀 복합재료를 제조하여 삭마 효과를 확인하였다. CNT 함량을 0.1 wt%에서 0.3 wt%까지 증가시킴에 따른 인장, 압축 강도를 평가하고 삭마 저항성에 대한 차이를 분석하였다. 산소와 등유를 혼합하여 화염 발생시켜 재료의 삭마 효과를 평가하였다. FE-SEM을 이용하여 삭마 실험 이후 발생된 시편의 미세 구조 변화를 확인하였다. CNT 함유 정도에 따른 TGA 열분석을 시도하여 열적 안정성을 평가하였다. 0.3wt% CNT-페놀 복합재료가 일반 페놀 수지 및 0.1 wt% CNT-페놀 복합재료보다 삭마율이 낮았다. 삭마에 따른 재료 변화 메커니즘을 규명하기 위해 TGA 분석 결과와 FE-SEM을 이용한 미세 구조 결과를 분석하였다. 고열의 화염을 이용한 삭마 실험을 통해 시편 내부의 CNT 입자가 존재하는 미세구조를 확인할 수 있었다. 수지 내부에 균일하게 분산된 CNT 입자의 역할이 내삭마성을 증가시키는 결과를 확인하였다.

GTL연료의 배출가스 특성 연구 (The Characteristics of Exhaust Gas Emissions with GTL Fuel)

  • 곽순철;서충열;강대일;박정민;임윤성;황춘식;엄명도;김종춘;이영재;표영덕;정충섭;장은정
    • 한국자동차공학회논문집
    • /
    • 제15권6호
    • /
    • pp.17-22
    • /
    • 2007
  • GTL(Gas-to-Liquids) fuel technology was converted from the natural gas, coal and biomass into the diesel or kerosene by Fisher-Tropsch synthesis. GTL fuel have very good merits on high cetane number, low density, free sulfur, lower aromatics contents and no poly-aromatic hydrocarbons as well as the autoignition characteristics. These physical properties make it valuable as a diesel fuel with lower emissions than the conventional diesel fuel. Furthermore, GTL fuel can be use not to the engine any modification. Therefore, to evaluate emissions of GTL fuel, the tested diesel vehicles were fueled on blends of GTL fuel/ultra low sulfur diesel fuel(ULSD). And then, we found out that GTL fuel reduced regulated emissions(CO, NOx, HC, PM) compare with conventional diesel fuel.

평형화학반응과 복사열전달을 고려한 로켓 플룸 유동 해석 (Numerical Study of Rocket Exhaust Plume with Equilibrium Chemical Reaction and Thermal Radiation)

  • 신재렬;최정열;최환석
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2004년도 춘계 학술대회논문집
    • /
    • pp.146-153
    • /
    • 2004
  • The Numerical study has been carried out to investigate the effects of chemical reaction and thermal radiation on the rocket plume flow-field at various altitudes. The theoretical formulation is based on the Navier-Stokes equations for compressible flows along with the infinitely fast chemistry and thermal radiation. The governing equations were solved by a finite volume fully-implicit TVD(Total Variation Diminishing) code which uses Roe's approximate Riemann solver and MUSCL(Monotone Upstream-centered Schemes for Conservation Laws) scheme. LU-SGS (Lower Upper Symmetric Gauss Seidel) method is used for the implicit solution strategy. An equilibrium chemistry module for hydrocarbon mixture with detailed thermo-chemical properties and a thermal radiation module for optically thin media were incorporated with the fluid dynamics code. In this study, kerosene-fueled rocket was assumed operating at O/F ratio of 2.34 with a nozzle expansion ratio of 6.14. Flight conditions considered were Mach number zero at ground level, Mach number 1.16 at altitude 5.06km and Mach number 2.9 at altitude 17.34km. Numerical results gave the understandings on the detailed plume structures at different altitude conditions. The diffusive effect of the thermal radiation on temperature field and the effect of chemical recombination during the expansion process could be also understood. By comparing the results from frozen flow and infinitely fast chemistry assumptions, the excess temperature of the exhaust gas resulting from the chemical recombination seems to be significant and cannot be neglected in the view point of performance, thermal protection and flow physics.

  • PDF

고속 비행체 냉각을 위해 사용되는 액체연료의 흡열량 측정연구 (Heat Sink Measurement of Liquid Fuel for High Speed Aircraft Cooling)

  • 김중연;박선희;현동훈;전병희;김성현;정병훈;한정식
    • 한국추진공학회지
    • /
    • 제18권2호
    • /
    • pp.10-15
    • /
    • 2014
  • 극초음속 비행체는 속도가 증가할수록 공기와의 마찰열과 엔진열이 증가한다. 이러한 열적부하는 비행체 구조물의 변형을 야기하고 오작동을 유발할 수 있다. 흡열연료는 액체 탄화수소 연료로써 열분해 반응, 촉매분해 반응과 같은 흡열반응을 통해 열을 흡수할 수 있는 연료이다. 본 연구에서는 methylcyclohexane을 모델연료로써 선정하여 흡열특성을 측정하는 연구를 수행하였다. 반응열을 향상시키기 위해 제올라이트를 적용하였고 HZSM-5가 흡열량 향상에 가장 효과적인 것을 확인하였다. 본 연구의 목적은 흡열량 향상에 미치는 촉매의 영향을 연구하는 것이다. 이 촉매는 케로신연료를 흡열연료로써 사용하는 시스템에 적용될 수 있을 것이다.

첨가제에 따른 경유연료의 세탄가 유도세탄가 및 세탄지수 분석 (Determination of the Cetane Number, Derived Cetane Number and Cetane Index for Diesel Fuel by Additives)

  • 임영관;김종렬;정충섭;임의순;김동길
    • Korean Chemical Engineering Research
    • /
    • 제48권3호
    • /
    • pp.375-381
    • /
    • 2010
  • 압축착화엔진용 경유연료 세탄가는 연료의 착화성을 나타내는 연료의 주요 특성중의 하나이다. 기존 CFR 엔진을 이용한 세탄가 분석의 번거로움을 피하기 위해 세탄가를 세탄지수로 대체하여 사용하고 있으나, 현재 다양한 첨가제에 의한 세탄가와 세탄지수 값의 차이를 보이고 있다. 본 연구에서는 첨가제로서 바이오디젤, 등유유분, 세탄가향상제를 베이스경유에 일정 비율로 혼합한 뒤, 세탄가, 유도세탄가 및 세탄지수를 분석하였다. 연구결과, 첨가제에 의한 세탄가와 유도세탄가는 유사한 결과값을 보였지만 세탄지수는 바이오디젤과 세탄가향상제 첨가시 현저한 분석값 차이를 보였다.

논문 : 안정적인 액체연료 공급을 위한 Cavitating Venturi 의 응용 (Papers : Application of Cavitating Venturi for Stable propellant feed system)

  • 박희호;김유;장은영;이수용
    • 한국항공우주학회지
    • /
    • 제30권1호
    • /
    • pp.88-94
    • /
    • 2002
  • 고압의 불활성 기체를 이용하여 엔진에 추진제를 공급하는 액체로켓의 경우, 추진제 탱크의 압력은 정상연소상태의 연소압을 기준으로 하여 설계한다. 그러나 연소초기의 연소실 압력은 대기압 상태이므로 과도한 유량이 공급되어 이로 인해 hard-start가 발생하며, 최악의 경우 엔진의 파손을 가져온다. 본 연구에서는 이러한 문제를 해결하고 안정된 연소를 위하여 개선된 추진제 공급시스템을 제안하며, 이는 실제 연소실험을 통해 그 성능을 규명 하였다. 이 공습시스템은 연소 초기 및 연소 중의 일정한 유량공급을 위해 Cavitating Venturi를 사용하는 시스템이다. Cavitating Venturi는 오직 공급압력에 의해서만 유량이 결정되며, 출구압력에 영향을 받지 않으므로 연소 초기는 물론이고, 연소 중 이상 연소에 의해 연소압이 떨어져도 설계치 이상의 유량이 공급되지 않는다. 본 실험을 통해서 Cavitating Venturi의 설계 영역에서의 유량에 대한 안정성이 입증되었기 때문에, Cavitating Venturi는 액체로켓 이외의 압력강하량 변화가 큰 시스템에서 매우 효과적일 것이다.