• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.7
• /
• pp.706-712
• /
• 2004

This paper presents the design technique of output multiplexer(OMUX) for the Ka-band satellite transponder. Output multiplexer consists of low-pass filter(LPF), channel filter and manifold. Channel filters adopt dual-mode technique in design for mass and volume reduction and frequency response of channel filters is 4-pole elliptic response for high frequency selectivity. w-pass filters are designed to be of 13th order corrugated type for high rejection characteristic over reception band of satellite transponder. After initial design of channel filters and manifold, we optimized only a few design parameters for fast and easy optimization instead of optimizing all the design parameter. Measured results of a realized output umltiplexer for Ka-band satellite transponder show good agreement with the computed ones.

• Journal of IKEEE
• /
• v.7 no.2 s.13
• /
• pp.230-235
• /
• 2003

A small and integrated MMIC VCO(Voltage Controlled Oscillator) at Ka-band has been developed. This oscillator was designed as Clapp-Gouriet type scheme, fabricated, and implemented on the carrier. This was connected to an alumna substrate on the carrier providing output port for module, utilizing ribbon and wire bonding technique allowing the loss of 0.2dB. This VCO module showed the excellent performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.7
• /
• pp.1770-1776
• /
• 1998

This paper presents a waveguide-to-mircostrip transition at Ka-band using antipodal finlines. Critical design parameters were identified with the help of theoretical analysis. Experimental optimization was performed together with 3-D FEM analysis in an effort to find optimum dimensions of the transition. In addition to the conventional antipodal finline transition, a new dielectric impedance transformer was introduced to further reduce the insertion loss. Optimized waveguide-to-microstrip transition showed an insertion loss of 0.3~0.4dB/transition at Ka-band. This transition provides superior reproducibility and better performance than conventional coaxcable-to-microstrip transition.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.1
• /
• pp.74-79
• /
• 2002

The EM(Engineering Model) VCO(Voltage Controlled Oscillator) is nonlinear designed for LO(Local Oscillator) of Ka-band satellite transponder. The microstripline coupled with dielectric resonator is implemented as a high impedance inverter to improve the phase noise, and the quality factor of resonant circuit can be transferred to active device with the enhanced loaded quality factor. The developed VCO has the oscillating tuning range of 9.7965~9.8032 GHz for the control voltage range of 0~12 V. This VCO requires the DC power of 8 V and 17 mA. The phase noise characteristics are -96.51 dBc/Hz @10 KHz and -116.5 dBc/Hz @100 KHz, respectively. And, the output power of 7.33 dBm is measured.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.179-182
• /
• 2000

BWLL용 Ka-Band MMIC 저잡음 증폭기 칩을 InGaAs/GaAs 0.15um Gate 길이의 p-HEMT 공정을 이용하여 개발하였다. 칩 크기 2.5$\times$1.5$\textrm{mm}^2$의 2단으로 설계된 칩의 On-wafer 측정 결과, 24～27 GHz BWLL 주파수 대역에서 최소 19$\pm$0.2dB 이득과 최대 1.7dB의 잡음 지수와 최소 13dB의 반사손실의 특성을 얻었다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.279-282
• /
• 2001

Ka-Band MMIC Mixer 칩 을 InGaAs/GaAs p-HEMT 공정의 Schottky Diode을 이용하여 개발하였다 설계된 칩은 상/하향 주파수 변환기로 사용할 수 있으며 Double Balance 구조로 되어있다. 크기 3.0$\times$2.4 $\textrm{mm}^2$ 칩의 On-wafer측정 결과, RF주파수 24～27 GHz와 LO주파수 16.28 GHz, IF 주파수 7.72～10.72GHz 상/하향에 대해서, 변환손실 <7dB와 Port별 격리도 >20dBc의 특성을 얻었다.

• ETRI Journal
• /
• v.25 no.5
• /
• pp.379-386
• /
• 2003

This paper presents the design of a narrow-band channel filter and its group-delay equalizer for a Ka-band satellite transponder. We used an 8th order channel filter for high selectivity with an elliptic-integral function response and an inline configuration. We designed a 2-pole, reflection-type, group-delay equalizer to compensate for the steep variation of the group-delay at the output of the channel filter, keeping the thermal stability at ${\pm}7$ ns of group-delay variation at the band edges over 15-55$^{\circ}C$. We devised a new tuning technique using short-ended dummy cavities and used it for tuning both the filter and equalizer; this removes the necessity of additional tuning after the cavities are assembled. Through measurement, we demonstrate that the group-delay-equalized filter meets the equipment requirements and is appropriate for satellite input multiplexers.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.5 s.108
• /
• pp.461-475
• /
• 2006

In this paper, it is described about the tri-band mobile antenna system design to provide broadband multimedia and direct broadcasting services using goo-stationary Koreasat 3, simultaneously operated in Ka/K/Ku band. The radiating part of the antenna system with a fan beam characteristic in the elevation plane is composed of the quasi-offset dual shaped reflector and the tri-band feeder. The tri-band feeder is also composed of the Ka/K dual band feeder with the protruding dielectric rod, the circular polarizer, the ortho-mode transducer and the circular-polarized Ku band feed array. Especially, the Ka/K dual band circular polarizer was realized firstly using the comb-type structure. For fast satellite-tracking on the movement, the Ku band feed array has the structure of the $2{\times}2$ active phased array which can make electrical beams. And, the circular-polarized characteristic in the feed array was improved by $90^{\circ}$ rotating arrangement of four radiating elements polarized circularly by a $90^{\circ}$ hybrid coupler, respectively. Four beam forming channels to make electrical beams at Ku band are divided into the main beam channel and the tracking beam channel in the output, and noise temperature characteristics of each channel were analyzed on the basis of the contributions of internal sub_units. From the fabricated antenna system, the output power at $P_{1dBc}$ of Ka_Tx channel was measured more than 34.1 dBm and the measured noise figures of K/Ku_Rx channels were less than 2.4 dB and 1.5 dB, respectively, over the operating band. The radiation patterns with co- and cross-polarization in the tri-band were measured using a near-field measurement in the anechoic chamber. Especially, Ku radiation patterns were measured after correcting each initial phase of active channels with partial radiation patterns obtained from the independent excitation of each channel. The antenna gains measured in Ka/K/Ku band of the antenna system were more than 39.6 dBi, 37.5 dBi, 29.6 dBi, respectively. And, the antenna system showed good system performances such as Ka_Tx EIRP more than 43.7 dBW and K/Ku_Rx G/T more than 13.2 dB/K and 7.12 dB/K, respectively.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.86-90
• /
• 2002

본 논문에서는 Ka-band 위성중계기에 사용되어지는 수신하향변환기(Receiver-Downconverter) 모듈의 설계 및 제작 그리고 시험 결과에 대하여 기술하였다. 개발된 수신하향변환기는 30.6~31㎓ 대역의 신호를 입력으로 받아들여 20.8~21.2㎓ 대역의 신호를 출력하는 일종의 Downconverter 이지만, 모듈의 입력단에 저잡음 증폭부가 포함된 수신기의 역할도 하고 있다. 개발된 모듈은 제작과정 및 시험과정에 있어 위성중계기 부품 제작 규정을 준수하였으며, 그 개발된 성능은 현재까지 알려진 국내외 유사 부품중의 최고의 성능을 보여주고 있다. 측정된 모듈의 성능은 상온에서 1.9㏈의 잡음지수, 55㏈ 이득, 58dBc의 C/l3 값을 보여주고 있다. 제작된 모듈의 크기는 93mm$\times$84mm$\times$26mm이며 무게는 240g으로서 국내외 유사 제품에 비해 소형이다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.10
• /
• pp.1060-1070
• /
• 2003

The frequency selective surface for use in Ka/Ku band parabolic antenna of domestic satellite communications is proposed. The frequency selective surface structure consists of the infinite periodic arrays of the triple square loop slot element with narrow width on the honeycomb structure of multi-layered dielectric. The frequency selective surface is fabricated and measured. The good agreement is obtained between theory and experiment. It is demonstrated that the frequency selective surface passes 14/12 GHz band wave while reflecting 30/20 GHz band wave as required.