• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.4
• /
• pp.67-74
• /
• 2001

Based on the national space development project, the necessity of developing liquid propellant rocket engine is revealed to secure the basic technology for the development of individual artificial-satellite launcher. Consequently, KARI (Korea Aerospace Research Institute) is developing a liquid propellant rocket engine for the KSR-III. Currently, a prototype engine using kerosene/LOx which produces 13-ton thrust is designed, fabricated and tested. In this paper, test procedure and technique for liquid propellant rocket engine are introduced with the analysis of static and dynamic test data.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.384.1-384
• /
• 2002

Rocket propulsion systems generate very high level noise (acoustic loads), which is due to supersonic jet of rocket propulsion system. In practice, the sound power level of rocket propulsion systems is over 180 ㏈. This high level noise excites rocket structures and payloads, so that it causes the structural failure and electronic malfunctioning of payloads. Prediction method of acoustic loads of rocket enables us to determine the safety of payloads. (omitted)

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.267-270
• /
• 2002

Combustion instability, which is one of the most undesirable phenomena in the development of liquid Propellant rocket engine, can cause serious damage to the rocket itself, and must be evaded by all means. Unfortunately, KSR-III rocket went through the combustion instability during engine start at the propulsion test article No.2. To resolve the problem, time sequence has been changed, and the baffle system has been applied. In consequence of the change, stable combustion was achieved.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.364.2-364
• /
• 2002

Thermoacoustic oscillation, which stems from phase correlation between unsteady heat release and acoustic fluctuation, can cause severe vibration and incite the excessive local heat transfer inside the rocket engine. It is very important to understand and prevent this phenomenon in the way of rocket engine development. In this study, the propulsion test facility of KSR-III, which is the first liquid propellant rocket developed by KARI, will be introduced. and the characteristics of thermoacoustic ocillation occurred at the facility will be examined.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.441-447
• /
• 2002

KSR-III(Korea Sounding Rocket - III), which is being developed by Space Technology R&D Division of KARI(Korea Aerospace Research Institute) will be launched in late 2002. It is a three-stage, liquid propellant rocket which can reach 250 km altitude and will carry out observation of ozone layer and scientific experiments, such as microgravity experiment, and atmospheric measurement. KSR-III is believed to be an intermediate to the launch vehicle capable of carrying a satellite to its orbit. Space Test Department of KARI performed GVT(Ground Vibration Test) fer KSR-III EM at Rocket Test Building of KARI. GVT is very important for predicting the behavior of rocket in its operation, developing flight control program and performing aerodynamic analysis. This paper gives an introduction of rocket GVT configuration and information on test procedures, techniques and results of It. In this test. to simulate free-free condition, test object hung in the air laterally by 4 bungee cords specially devised. For the excitation of test object, pure random signal by two electromagnetic shakers was used and total 22 frequency response functions were achieved. Polyreference parameter estimation was performed to identify the modal parameters with MIMO(Multi-Input-Multi-Output) method. As the result of the test, low frequency mode shapes and modal parameters below 60Hz were identified

• Journal of the Korean Society of Propulsion Engineers
• /
• v.6 no.3
• /
• pp.45-52
• /
• 2002

This article deals with the introduction of longitudinal instability of liquid rocket (pogo) and the analytical results on the frequency responses of Korean Sounding Rocket (KSR-III) propulsion feeding system. Both the stiffness of bellows and the cavitation volume of venturi affect the frequency response of the feeding system. Especially, bellows has a great roll to reduce the natural frequency of the feeding system. Also, oxidizer and fuel feeding systems of the KSR-III have natural frequencies of about 280Hz and 90Hz, respectively.

• Aerospace Engineering and Technology
• /
• v.1 no.1
• /
• pp.117-127
• /
• 2002

In this paper, structure design of the payload section of the KSR-III was performed. The payload section of the KSR-III, which corresponds to the second stage, consists of the Scientific Payload Section for the mission of the rocket, the Payload Section (Electronics) for the communication between the rocket and the ground station, and the Payload Section (Attitude Control) for the attitude control of the rocket. In order to accomplish the mission, every payload and component should operate successfully during the mission period and the structure must satisfy the requirements of the payloads. In this research, precise composition of the payload section and payloads arrangement of the KSR-III were performed. And the modification of the structure to meet the requirements were described.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.4
• /
• pp.40-49
• /
• 2001

The basic research on AKM(Apogee Kick Motor) for space launch vehicle was carried out. AKM which will be used as 3rd stage solid rocket motor in 3-stage Korean Sounding Rocket(III) has been developing. KM is a solid rocket motor using composite propellant based on HTPB and is composed of composite motor case and submerged nozzle. To develop KM rocket motor satisfing a given set of requirement, firstly the full-scale KM with diameter 520mm was designed, then sub-scale motors reduced about 60% were manufactured and tested. Full-scale ground firing test is accomplished two times.

• 한국연소학회:학술대회논문집
• /
• 2001.06a
• /
• pp.90-98
• /
• 2001

Characteristics of high temperature rocket nozzle flow is discussed along with the aspects of computational analysis. Three methods of nozzle flow analysis, frozen-equilibrium, shifting-equilibrium and non-equilibrium approaches, were discussed, those were coupled with the methods of computational fluid dynamics code. A chemical equilibrium code developed for the analysis of general hydrocarbon fuel was coupled with three approaches of nozzle flow analysis. The approaches were used for the performance prediction of KSR-III Rocket, and compared with the theoretical results from NASA CEA (Chemical Equilibrium with Applications) code.

• Aerospace Engineering and Technology
• /
• v.2 no.2
• /
• pp.105-114
• /
• 2003

It is conducted to analyze vibration loads on the 1st stage of KSR-III(KSR : Korea Sounding Rocket) during their ground transportation and various handling process. These loads may be different from the real flight environment. Inadequate assessment of these loads can cause not only local damages on the rocket system but also the critical problem like flight mission failure. Therefore, transportation and handling loads must be considered during design and attenuated to ensure that the rocket structural damage does not occur. This work is concerned with the generation of criteria and prediction of transportation and handling loads for KSR-III. The results show that the shipping container is well designed to satisfy the design requirements. The maximum vibration level recorded during whole transportation and handling for KSR-III is less than 2g, the criteria of KSR-III movement condition.