• Aerospace Engineering and Technology
• /
• 제11권2호
• /
• pp.208-215
• /
• 2012

The acoustic noise around a launch pad by launches of space launch vehicles was analyzed. The magnitudes of sound noise at some points near launch pad were predicted by locating the sound source at the exhaust jet plume of the rocket engine and considering several factors such as the directivity of the sound propagation and atmospheric attenuation. Specifically, the launch noise of Korea Space Launch Vehicle-I (KSLV-I) was estimated, and was compared to the actual measurement results. The analysis results proved to be heavily affected by the characteristics of directivity of sound propagation and the analysis showed good agreements with the measurements when the directivity of the sound was appropriately adjusted.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• 제38권3호
• /
• pp.280-287
• /
• 2010

The first Korean satellite launch vehicle, KSLV-I(Korea Space Launch Vehicle-I), was launched for its first flight test on Aug. 25, 2009 from Naro Space Center located in south Jolla province. Because launch vehicles usually fly long range with large amount of propellants aboard, preparation of countermeasures against potential malfunctions during flight is essential in launch operation. In this paper, the flight safety operation, prepared to guarantee flight safety during launch operation of KSLV-I, is presented. Prior to flight test, flight safety analysis is performed to estimate associated risk levels quantitatively, and during flight, flight safety systems are operated to cope with any risky situations. Real-time flight monitoring including computation of instantaneous impact point using tracking data is executed normally and the flight test is completed without activation of flight termination system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• 제38권7호
• /
• pp.737-745
• /
• 2010

This paper describes the operation results of the GPS receiver system for KSLV (Korea Space Launch Vehicle)-I on the launch site at Naro Space Center that is the first spaceport of South Korea located at Goheung. All equipments of KSLV-I including the GPS receiver system should be monitored and controlled through hard-wired interface during KSLV-I is on standby at the launch pad. The GPS receiver for KSLV-I is connected to triple almost omni-directional patch antennas mounted on the cylindrical surface of KSLV-I that should be erected vertically on the launch pad until lift-off. Signal interference and multipath effects observed in the GPS receiver on the launch site are analyzed in this paper based on the GPS signals received from each GPS antenna.

• Journal of the Korean Society of Propulsion Engineers
• /
• 제22권5호
• /
• pp.107-114
• /
• 2018

Korea Space Launch Vehicle (KSLV)-I flight test data and the modified 1-dimensional steady state modeling data from the critical design results of the KSLV-II liquid oxygen filling system operation are compared to validate the reliability of critical design modeling. A comparison of major flow rates and pressure values between test data and calculation results are conducted. The relative errors relative to maximum total flow rate for each cooling, filling, and replenishment mode are determined within 6.7%. Calculated pressure values at the outlet of the pump and the inlet of flow control valves are within 5.1%. The pressure at the inlet of the launch vehicle for each operation mode are within the measured pressure range.

• Aerospace Engineering and Technology
• /
• 제9권1호
• /
• pp.116-124
• /
• 2010

Ground complex composed of Assembly Complex(AC) and Launch Complex(LC) which is located on Oenarodo space center in Kohung is necessary for successful launching of KSLV-I. AC performs accepting of a KSLV-I 1st stage and 2nd stage, stage assembly, the integrated launch vehicle, the checked out, and all kinds of performance test, pre-launch tests and processing. At AC, the mechanical support equipments, that is called the technological equipments, are installed in the Launch Vehicle Assembly Test Building(LVATB). These technological equipments have diverse forms of an interface with mechanical/electric device of the launch vehicle and have to provide a condition and the performance guarantee of an optimum in the launching operation process. In this paper, the requirements specification and manufacturing performance test for the mechanical support equipments which are used in the assembly/disassembly and test of the launch vehicle are introduced.

• Journal of the Korean Society of Propulsion Engineers
• /
• 제14권4호
• /
• pp.71-80
• /
• 2010

The KSLV-II(Korea Space Launch Vehicle-II) which being a successor of the KSLV-I is a space launch vehicle capable of delivering 1.5 ton-class satellite into a low earth orbit. The development of a 75 tonf-class liquid rocket engine(LRE) is planned on the basis of the technologies mastered through the preceded research of a 30 tonf-class LRE. The thrust chamber of the LRE is required to have higher combustion stability, structural integrity and thermal durability. This paper deals with the design requirements of the 75-tonf thrust chamber and a variety of technical considerations which have been conducted analytically in the course of the design for the realization of the requirements.

• Bulletin of the Korean Space Science Society
• /
• 한국우주과학회 2009년도 한국우주과학회보 제18권2호
• /
• pp.49.1-49.1
• /
• 2009

Ground Complex, which is located at Naro Space Center, consists of Assembly Complex(AC) and Launch Complex(LC) which is necessary for successful launch of KSLV-I(NARO). AC consists of Assembly/Testing Building(ATB), Payload Processing Building(PPB), Kick Motor Building(KMB). The purpose of AC is accepting of KSLV-I components, testing, checkout, assembly(disassembly) of the launch vehicle(LV), readiness for transferring LV to LC, accepting of integrated Launch Vehicle(ILV) in case of launch cancellation and short/long time storage, and so on. Qualification tests(QT) for the total system at AC are carried out to check hardware used for operations with first stage unit mockup, upper stage unit Mockup and integrated mockup(GTV). The qualification tests is carried out according to program and procedures of QT. By course of this process, AC is certificated that all the systems and facilities of AC are guaranteed by the fulfillment of technological operations envisioned in the program of qualification tests during the work with the mock-up.

• Bulletin of the Korean Space Science Society
• /
• 한국우주과학회 2004년도 한국우주과학회보 제13권2호
• /
• pp.274-277
• /
• 2004

KSLV (Korea Space Launch Vehicle)-I telemetry system will be composed of two telemetry streams: a lower stage telemetry stream and an upper stage telemetry stream. In this paper, the authors present design, implementation and test results of the upper stage telemetry interface for KSLV-I. The telemetry system currently is in the stage of the prototype model development, and its engineering model and flight model will be developed in the near future.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.448-451
• /
• 2008

KARI is developing a satellite launch vehicle that is called KSLV(Korea Space Launch Vehicle)-I. During the flight, launch vehicles are exposed to aerodynamic heating conditions while flying at high Mach numbers in the atmosphere. KARI constructed Aerodynamic Thermal Simulation Facility to simulate aerodynamic heating on the ground. ATSF is a facility that can simulate given temperature profile using about 4,000 halogen heaters on fairing model. Aerodynamic heating profile is got from result of thermal analysis using MINIVER, Thermal Desktop, and SINDA/FLUINT. Aerodynamic heating test of fairing of KSLV-I was done using engineering model of payload fairing and Aerodynamic Thermal Simulation Facility. It was found that thermal analytic results show good agreement with aerodynamic heating test results within 6$^{\circ}$C at fairing inner surface. Also it was confirmed that maximum temperature of fairing nose-cone inner surface during flight is lower than allowable temperature limit.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• 제47권3호
• /
• pp.19-27
• /
• 2010

KSLV(Korea Space Launch Vehicle)-I is designed as a launch vehicle to enter a 100 kg-class satellite to the LEO(Low-Earth Orbit). Attitude angles of the upper-stage, including roll, pitch and yaw are controlled by cold gas thruster system using nitrogen gas. The thruster for the KSLV-I is the main pneumatic valve in the RCS(Reaction Control System). In this paper, the design, function tests, and environment tests of the thruster for KSLV-I are described. The developed thrusters are experimentally evaluated and successfully passed the required qualification and acceptance tests.