• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.966-970
• /
• 2005

On the basis of the development of KSLV-1, KoDSat was designed and manufactured to demonstrate the performance of KSLV-1. KoDSat is exposed to a severe vibrational environment at launch. The structural reliability of KoDSat has to be verified using vibrational test. The structural compatibility and verification of components between analysis and test can be proved using environmental vibration test. In this paper, we review the structural characteristic of thruster control unit for a space launch vehicle and design TCU housing using mathematical model. In order to verify the structural compatibility and reliability, half-sine shock, random and sing sweep vibration test was performed. Especially, sing sweep vibration test result is compared with analysis result and mathematical model is verified.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.71-74
• /
• 2006

This study shows the historical background, and work flow of PRA (Probabilistic Risk Assessment) method which devised by NASA during the space development. It also illustrates the possibility of adoption of the method to evaluation of reliability KSLV project.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.623-626
• /
• 2009

Hanwha Corporation Daejeon Plant have developed apogee Kick Motor of KSLV-I that is the first among nation space launch vehicle for five years from 2003. Now, we are joining in KSLV-II(Korea Space Launch Vehicle-II) project and developing Pyro starter which is turbo pump for the first start-up of liquid propulsion supply.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.219-222
• /
• 2007

This research on 2nd stage solid rocket motor of KSLV-I for performance change was carried out. Solid rocket motor shall ignite on altitude of 300km. Solid Rocket Motor performed Static Firing Test and High Altitude Test for motor performance. A study made an analysis of specific impulse variation for nozzle ambient pressure.

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.332-336
• /
• 2004

This paper describes the remote tracking algorithm using measurements (azimuth, elevation, and slant range) of the radar ground station. Kalman filter model for noise reduction of the measured information is first derived by linearizing with respect to angle, angular rate, range, and range rate. And then a tracking algorithm is introduced to calculate the position of the vehicle during in-flight. The simulation results show that the algorithm is practical and effective enough tracking position of the vehicle in considerably less error.

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.356-359
• /
• 2004

Prelaunch thermal analysis of the KSLV (Korea Space Launch Vehicle)-I PLF (Payload Fairing) was performed to predict maximum/minimum liftoff temperatures and to evaluate of air conditioning performance. Prelaunch thermal analysis includes internal air conditioning effect, external convective heating/cooling, radiation exchange with the ground and sky, radiation between spacecraft and PLF, and solar radiation incident on PLF. Analysis was performed at two extreme conditions, hot day condition and cold day condition. The results showed that the maximum liftoff temperature was $53^{\circ}C$ and the minimum liftoff temperature was $-3.8^{\circ}C$. It was also found that conditioned air supplying, in $20{\pm}2^{\circ}C\;and\;1200\;m^3/hr$, is sufficient to keep the internal air in required temperature range.

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.308-311
• /
• 2004

This paper describes design, implementation and functional test of on-board flight analog video system. Video system is the part of the telemetry system as a means of providing flight vehicle's image data. Adopting analog video transmission technique, we could design and test the system in a short time and implement the prototype model with simpler circuits. As results of the functional test, we have made the verification and validation of two cameras' switching in time, and frequency modulation and demodulation of NTSC color signals successfully.

• Aerospace Engineering and Technology
• /
• v.12 no.1
• /
• pp.81-86
• /
• 2013

This article deals with the manufacturing and performance evaluation on the specimen pipes which have large size diameter and thin thickness. This specimen is for LOX main pipe of KSLV-II propulsion feeding system. The material of specimen is alloy 21-6-9. Alloy 21-6-9 has higher strength and better weldability rather than STS-300 class pipes. We found that the specimen using alloy 21-6-9 satisfied the requirement by pressurization tests.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.1169-1170
• /
• 2017

Engine System Development Document management system(ESDD) 2.0 has already been operated for systematic engine systems development of KSLV-II. In addition, ESDD 3.0 is under development to manage the documents of before and after engine tests. In this paper, the concept and direction of ESDD 3.0 will be briefly described.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.1184-1187
• /
• 2017

The space launch vehicle needs the verification of each stage's propulsion system. The Propulsion System Test Complex(PSTC) is constructed for developing KSLV-II in the Naro space center. Hydraulic and pneumatic system of PSTC should supply propellants and various gases to propulsion system module according to required condition. This paper introduces liquid oxygen filling system of PSTC.