• Journal of the Korea Institute of Building Construction
• /
• v.17 no.6
• /
• pp.499-506
• /
• 2017

This study is to present empirical data about the needs for quality security of aggregate by randomly selecting aggregate from 4 major locations including A, B, C, D province in Korea, by investigating its quality status in terms of physical properties and particle distribution based on Korean industrial standards(KS). The test results indicated that wide variance in quality, and some of aggregate samples were far below the standard, still many of them are not satisfying KS standards. In addition, the current aggregate manufacturing process that does not include inspection of particle size distribution by sieving and fineness modulus, can induce a possibility of non-KS aggregate's distribution; this provide that the current status of aggregate quality security of Korea is seriously threatened. Thus, it is important to secure each aggregate's quality level under KS standards.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.2
• /
• pp.125-135
• /
• 2016

The objective of this paper is to provide integrated Korea industrial standards(KS) for concrete aggregates, which has been separately provided with ten kinds of KS, in order to improve the way of quality management of concrete aggregate and to prevent distribution of unsuitable aggregates. For the sequences of the paper, typical foreign standards related to concrete aggregates including ASTM for US, EN for EU, JIS for Japan are reviewed and compared to provide necessities and feasibilities of the paper. Based on the analysis above results, existing KS for concrete aggregates, which have been separately provided with ten kinds being lack of correlation between each KS is integrated to KS F 2526 "Aggregates for concrete" in this paper. By doing this, in terms of terminology, the expression of the aggregate, which has been currently classified into specified terminologies of aggregates depending on sources, manufacturing methods of each aggregates, is able to be integrated to single expression of the aggregate for concrete. It is believed that integrated KS presented herein provides more desirable way in terms of its better accessibility, easier revision and closer connection between each aggregate kinds.

• Magazine of the Korea Concrete Institute
• /
• v.13 no.1
• /
• pp.66-72
• /
• 2001

지구 온난화, 천연 자원의 고갈, 처분 장소의 핍박 등 환경문제가 사회적인 문제로 대두되고 있다. 특히 건설분야에서 천연산 골재의 부족은 매우 심각한 상황에 있으며, 이를 해결하기 위해 재생골재의 재활용 등 많은 연구가 이루어져 1999년도에는 아스팔트 콘크리트용 재생골재(KS F 2572), 콘크리트용 재생골재(KS F 2573), 도로기층용 재생골재(KS F 2574)에 대한 규격을 제정함으로써 실용화의 단계에까지 이르고 있다 그러나 제철소의 제강 및 정련 공정상에서 발생하는 철강슬래그를 콘크리트용 골재로서 활용하기 위한 국내의 연구는 몇몇 연구자들에 의해서만 이루어지고 있어 초기 단계에 있다고 할 수 있다. 이에 본고에서는 콘크리트용 천연산 골재의 대체 재료로서 각종 철강슬래그의 적극적인 재활용을 도모하기 위해 최근 슬래그를 골재로서 사용하기 위해서 연구한 결과 및 실례를 수록한 문헌을 조사 검토하여 슬래그 골재의 특성에 대하여 소개하고자 한다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.120-121
• /
• 2015

In this research, to evaluate the influence of using non-KS aggregate on concrete performance, the engineering properties of normal strength concrete were assessed depending on the KS aggregate and non-KS aggregate from various sources in mid-Korea. From the experiment, when the non-KS aggregate was used, low compressive strength was achieved with increased water-to-cement ratio caused by increased unit water due to high absorption rate of the non-KS aggregate.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.465-468
• /
• 2008

This study investigated the best condition when mixed sand with a river and crushed sand was used though the experiment for the properties of the concrete corresponding to the control of fine aggregate ratio to apply the mixed sand and properties of the fine aggregate at the ready-mixed concrete factory on Yeongnam and Honam. The physical properties of Yeongnam and Honam is satisfied with KS F 2526 and KS F 2527 except fineness modulus and passing amount of 8mm sieve. And, the mixed sand above two types which were incongruent to use individually was being used at each factory, and it was managed in accordance with KS. The flowabillity of the mixture proportion of concrete which was estimated by method of unit volume weight according to the fine aggregate ratio at each factory on Yeongnam and Honam was higher than existing mixture proportion. It was analyzed that the residual water due to decline of the surface area caused by reducing fine aggregate ratio was increased relatively. Accordingly, it was considered that the effect on the economic mixture proportion and improvement of durability might be possible.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.5
• /
• pp.449-456
• /
• 2013

This study was carried out to assess the suitability in terms of the standards of material quality of basalt aggregates from JEJU Island as a source for concrete aggregate. Quality assessments on the basalt aggregates were performed to assess the soundness of coarse aggregates using sodium sulfate solution, aggregate crushing test, and Los Angeles abrasion test. In addition, XRD, XRF, porosity, and compressive and tensile strength tests were performed to analyze the chemical components and the mechanical properties. In general, the mechanical properties of basalt aggregates from some areas did not meet the Korea Standards (KS), but the levels of compressive and tensile strength were higher than those of granite, andesite, and sandstone of other regions.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.255-256
• /
• 2009

This purpose of this study was to evaluate the controlling effect of alkali-aggregate reactivity using mineral admixtures for aggregates in Korea according to test methods: chemical test by KS F 2545; mortar bar test by KS F 2546; accelerated mortar bat test by ASTM C 1260.

• Resources Recycling
• /
• v.29 no.2
• /
• pp.18-27
• /
• 2020

Chemical experiment KS F 2545 and Physical experiment ASTM C 1260 has been accomplished to estimate the potential of alkali aggregate. Used for testing aggregate samples are forest aggregate and recycled aggregate which collected in Gangwon province Samcheok and Pyeongchang, Jeollabuk province Gimje and Kochang, and Gyeongsangnam province Goryeong. As the results of chemical experiment confirmed that if silicate rock and carbonate rock are mixed, reduction in alkalinity is increase. So it has been identified that case makes a disturb at the result of alkali aggregate reaction. In 9 out of the 62 aggregate samples check dissolved silica exceeding 100 mmol/ℓ. and mortar bar length increase rate confirmed that 5 of 9 chemical method aggregates were 0.1~0.2% and 2 aggregates were 0.2%. As a result of the alkaline aggregate reaction test using the chemical method and the mortar bar method, the aggregates showing alkali aggregate reaction are sandstone and tuff aggregates. Therefore, Alkali aggregate reaction tests are required to use clastic sedimentary rocks and volcanic pyroclastic rocks aggregates.

• Economic and Environmental Geology
• /
• v.38 no.3 s.172
• /
• pp.319-334
• /
• 2005

Some of old fluvial sediments are originally composed of fine and silty-clay grains with sands or some of them have been segregated by weathering as a result of the influence of groundwater fluctuations. For this reason, some of old fluvial sediments are not suitable for using as fine aggregates. Furthermore, the old fluvial aggregates with comparatively good quality have been exploited for a long time and quality of most remainders have been significantly poor. Though many old fluvial aggregates do not satisfy the quality controls(QC) standards such as KS F2526 and KS F 2527, they must be utilized to various usage suitable far different quality categories. Thus, we try to make constant efforts to utilize aggregates of all qualities. This study shows that physical properties of old fluvial aggregates are both controlled by source rocks and also related to old fluvial environment.

• Journal of the Korea Concrete Institute
• /
• v.20 no.6
• /
• pp.689-696
• /
• 2008

The purpose of this study was to evaluate the alkali-silica reactivity for aggregates in Korea according to test methods: accelerated mortar bar test (AMBT) by ASTM C 1260; chemical test by KS F 2545 (ASTM C 289). The results are as follows: The AMBT (ASTM C 1260) results showed that two (2) igneous rocks (two mica granite and felsite), three (3) sedimentary rocks (arkose, red sandstone and shale), two (2) metamorphic rock (slate and vitric tuff), one (1) mineral (quartz) showed more expansion than 0.1% at 14 days. But, some sedimentary rocks and metamorphic rocks expanded more than 0.1% at 28 days even though they were less than 0.1% at 14 days. Therefore, it is necessary to extend the experimental dates more than 14 days to evaluate the possibility of alkali-aggregate reactivity. The chemical test (KS F 2545) results showed that five (5) igneous rocks (andesite, diabase, granite porphyry, muscovite granite and diorite) were indicative of potentially deleterious expansion, while two (2) igneous rocks (diorite porphyry and quartz porphyry) were possible indicative of expansion, and three (3) igneous rocks (biotite granite, two mica granite and felsite) were indicative of innocuous reactivity. The above results showed that the results from chemical method (KS F 2545) and AMBT (ASTM C 1260) had little relationship.