• International Journal of Aeronautical and Space Sciences
• /
• v.6 no.1
• /
• pp.77-88
• /
• 2005

KOMPSAT-2 is the second Korean earth observation satellite after KOMPSAT-l: the 1 meter GSD cartographic capability and planning to launch at the end of 2005 by ROKOT launch vehicle. The dedicated AOCS operational modes are designed for KOMPSAT-2 based on KOMPSAT-l experience All of AOCS operational modes requires gyro information. To compensate this drawback, Power Safe Mode is designed and implemented. Successfully AOCS on-board software is developed and extensively verified through a nonlinear simulation process. The simulation results of Power Safe Mode and Science Fine Submode are provided to demonstrate its functionality as well as its performance.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_2
• /
• pp.1493-1507
• /
• 2020

The LEOP Cal/Val (Launch and Early Operation Phase Calibration/Validation) was carried out during 6 months after KOMPSAT-3A (KOMPSAT-3A Korea Multi-Purpose Satellite-3A) was launched in March 2015. After LEOP Cal/Val was successfully completed, high resolution KOMPSAT-3A has been successfully distributing to users over the past 8 years. The sub-meter high-resolution satellite image data obtained from KOMPSAT-3A is used as basic data for qualitative and quantitative information extraction in various fields such as mapping, GIS (Geographic Information System), and national land management, etc. The KARI (Korea Aerospace Research Institute) periodically checks and manages the quality of KOMPSAT-3A's product and the characteristics of satellite hardware to ensure the accuracy and reliability of information extracted from satellite data of KOMPSAT-3A. To minimize the deterioration of image quality due to aging of satellite hardware, payload and attitude sensors of KOMPSAT-3A, continuous improvement of image quality has been carried out. In this paper, the Cal/Val work-flow defined in the KOMPSAT-3A development phase was illustrated for the period of before and after the launch. The MTF, SNR, and location accuracy are the key parameters to estimate image quality and the methods of the measurements of each parameter are also described in this work. On the basis of defined quality parameters, the performance was evaluated and measured during the period of after LEOP Cal/Val. The current status and characteristics of MTF, SNR, and location accuracy of KOMPSAT-3A from 2016 to May 2020 were described as well.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_4
• /
• pp.1341-1350
• /
• 2019

This research deals with algorithm for forest fire severity classification using multi-temporal KOMPSAT-3A image to mapping forest fire areas. The recent satellite of the KOMPSAT series, KOMPSAT-3A, demonstrates high resolution and multi-spectral imagery with infrared and high resolution electro-optical bands. However, there is a lack of research to classify forest fire severity using KOMPSAT-3A. Therefore, the purpose of this study is to analyze forest fire severity using KOMPSAT-3A images. In addition, this research used pre-fire and post-fire Sentinel-2 with differenced Normalized Burn Ratio (dNBR) to taking for burn severity distribution map. To test the effectiveness of the proposed procedure on April 4, 2019, Gangneung wildfires were considered as a case study. This research used the probability density function for the classification of forest fire damage severity based on R software, a free software environment of statistical computing and graphics. The burn severities were estimated by changing NDVI before and after forest fire. Furthermore, standard deviation of probability density function was used to calculate the size of each class interval. A total of five distribution of forest fire severity were effectively classified.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.4
• /
• pp.327-343
• /
• 2020

This study proposes a method to improve the geometric quality of KOMPSAT (Korea Multi-Purpose Satellite)-3/3A Level 1R imagery, particularly for efficient disaster damage analysis. The proposed method applies a novel grid-based SIFT (Scale Invariant Feature Transform) method to the Planetscope ortho-imagery, which solves the inherent limitations in acquiring appropriate optical satellite imagery over disaster areas, and the KOMPSAT-3/3A imagery to extract GCPs (Ground Control Points) required for the RPC (Rational Polynomial Coefficient) bias compensation. In order to validate its effectiveness, the proposed method was applied to the KOMPSAT-3 multispectral image of Gangnueng which includes the April 2019 wildfire, and the KOMPSAT-3A image of Daejeon, which was additionally selected in consideration of the diverse land cover types. The proposed method improved the geometric quality of KOMPSAT-3/3A images by reducing the positioning errors(RMSE: Root Mean Square Error) of the two images from 6.62 pixels to 1.25 pixels for KOMPSAT-3, and from 7.03 pixels to 1.66 pixels for KOMPSAT-3A. Through a visual comparison of the post-disaster KOMPSAT-3 ortho-image of Gangneung and the pre-disaster Planetscope ortho-image, the result showed appropriate geometric quality for wildfire damage analysis. This paper demonstrated the possibility of using Planetscope ortho-images as an alternative to obtain the GCPs for geometric calibration. Furthermore, the proposed method can be applied to various KOMPSAT-3/3A research studies where Planetscope ortho-images can be provided.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2000.10a
• /
• pp.419-424
• /
• 2000

The land cover classification by using remotely sensed image becomes necessary and useful for hydrologic and water quality related applications. The purpose of this study is to obtain land classification map by using remotely sensed data : Landsat TM and KOMPSAT-1 EOC. The classification was conducted by maximum likelihood method with training set and Tasseled Cap Transform. The best result was obtain from the Landsat TM merged by KOMPSAT EOC, that is, similar with statistical data. This is caused by setting more precise training set with the enhanced spatial resolution by using KOMPSAT EOC(6.6m${\times}$6.6m).

• Korean Journal of Remote Sensing
• /
• v.37 no.1
• /
• pp.123-137
• /
• 2021

In this study, we performed cross calibration of KOMPSAT-3 AEISS imaging sensor with reference to normalized pixels in the Landsat 8 OLI scenes of homogenous ROI recorded by both sensors between January 2014 and December 2019 at the Libya 4 PICS. Cross calibration is using images from a stable and well-calibrated satellite sensor as references to harmonize measurements from other sensors and/or characterize other sensors. But cross calibration has two problems; RSR and temporal difference. The RSR of KOMPSAT-3 and Landsat 8 are similar at the blue and green bands. But the red and NIR bands have a large difference. So we calculate SBAF of each sensor. We compared the SBAF estimated from the TOA Radiance simulation with KOMPSAT-3 and Landsat 8, the results displayed a difference of about 2.07~2.92% and 0.96~1.21% in the VIS and NIR bands. Before SBAF, Reflectance and Radiance difference was 0.42~23.23%. Case of difference temporal, we simulated by 6S and Landsat 8 for alignment the same acquisition time. The SBAF-corrected cross calibration coefficients using KOMPSAT-3, 6S and simulated Landsat 8 compared to the initial cross calibration without correction demonstrated a percentage difference in the spectral bands of about 0.866~1.192%. KOMPSAT-3 maximum uncertainty was estimated at 3.26~3.89%; errors due to atmospheric condition minimized to less than 1% (via 6S); Maximum deviation of KOMPSAT-3 DN was less than 1%. As the result, the results affirm that SBAF and 6s simulation enhanced cross-calibration accuracy.

• Korean Journal of Remote Sensing
• /
• v.33 no.6_3
• /
• pp.1179-1185
• /
• 2017

The KOMPSAT-3A satellite acquires high-resolution MWIR images twice a day compared to conventional Earth observing satellites. New radiometric information of Earth's surface can be provided due to different characteristics from existing SWIR images or TIR images. In this study, the difference image of multitemporal images was generated and compared with existing infrared images to find the characteristics of KOMPSAT-3A MWIR satellite images. A co-registration was performed and the difference between pixel values was minimized by using PIFs (Pseudo Invariant Features) pixel-based relative normalization. The experiment using Sentinel-2 SWIR image, Landsat 8 TIR image, and KOMPSAT-3A MWIR image showed that the distinction between artifacts in the difference image of KOMPSAT-3A is prominent. It is believed that the utilization of KOMPSAT-3A MWIR images can be improved by using the characteristics of IR image.

• Korean Journal of Remote Sensing
• /
• v.19 no.6
• /
• pp.447-456
• /
• 2003

This study investigated the method for obtaining 3-dimensional terrain information on inaccessable areas by evaluating geometric accuracy of the EOC pass image and scene image acquired from the KOMPSAT-1 satellite. For this purpose, the following four experiments were conducted to evaluate the accuracy of the KOMPSAT-1 EOC satellite data. 1) Calculation of ground coordinates by using ancillary data and image coordinates on Level 1R that were processed by the pre-processing system of KOMPSAT-1. 2) Calculation of 3-dimensional ground coordinates from the ground coordinates of stereo images calculated by using ancillary data, based on space intersections. 3) Execution of bundle adjustment by using GCP (Ground Control Point) extracted in a part of the stereo pass image (KOMPSAT-1 EOC, 1 scene size); and then, evaluation of the ground coordinates from the calculated exterior orientation. 4) Evaluation of accuracy by applying the exterior orientation calculated from 3) To the whole pass image.

• Korean Journal of Remote Sensing
• /
• v.33 no.6_3
• /
• pp.1223-1232
• /
• 2017

This paper presents an approach to detect changes caused by urban development over a large area using KOMPSAT optical images. In order to minimize the radiometric dissimilarities between the images acquired at different times, we apply the grid-based rough radiometric correction as a preprocessing to detect changes in a large area. To improve the accuracy of the change detection results for urban development, we mask-out non-interest areas such as water and forest regions by the use of land-cover map provided by the Ministry of Environment. The Change Vector Analysis(CVA) technique is applied to detect changes caused by urban development. To confirm the effectiveness of the proposed approach, a total of three study sites from Sejong City is constructed by combining KOMPSAT-2 images acquired on May 2007 and May 2016 and a KOMPSAT-3 image acquired on March 2014. As a result of the change detection accuracy evaluation for the study site generated from the KOMPSAT-2 image acquired on May 2007 and the KOMPSAT-3 image acquired on March 2014, the overall accuracy of change detection was about 91.00%. It is demonstrated that the proposed method is able to effectively detect urban development changes in a large area.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_4
• /
• pp.1373-1389
• /
• 2019

KOMPSAT-5 is the first satellite in Korea equipped with X-band Synthetic Aperture Radar (SAR) instrument and has been operated since August 2013. KOMPSAT-5 is used to monitor the global environment according to its observation purpose and the availability of KOMPSAT-5 is also highlighted as the need of high resolution wind data for investigating the coastal region. However, the previous study for the validation of wind derived from KOMPSAT-5 showed that the accuracy is lower than that of other SAR satellites. Therefore, in this study, we developed the correction equation of normalized radar cross section (NRCS or backscattering coefficient) for improvement of wind from the KOMPSAT-5 and validated the effect of the equation using the in-situ measurement of ocean buoys. Theoretical estimated NRCS and observed NRCS from KOMPSAT-5 showed linear relationship with incidence angle. Before applying the correction equation, the accuracy of the estimated wind speed showed the relatively high root-mean-square errors (RMSE) of 2.89 m s^-1 and bias of -0.55 m s^-1. Such high errors were significantly reduced to the RMSE of 1.60 m s^-1 and bias of -0.38 m s^-1 after applying the correction equation. The improvement effect of the correction equation showed dependency relying on the range of incidence angle.