• 중환자간호학회지
• /
• 제10권1호
• /
• pp.41-50
• /
• 2017

Purpose: The purpose of this study was to describe what critical care nurses perceived about life-sustaining treatment at end of life. Methods: A qualitative content analysis method was utilized. The unit of analysis was interview text obtained from fifty critical care nurses of a general hospital. Results: Seven categories in two content areas were abstracted. In the negative perception area, the following five categories were abstracted: patients' suffering, dying with damaged dignity, patients' isolation from family members, regret about choosing life-sustaining treatment, and family members' burden. In the positive perception area, the following two categories were abstracted: willingness to sustain life and duty as family members. Conclusions: Nurses have better competencies pertaining to understanding patients' responses and suffering than any other health care professions do. Nurses should play an important role in advocating for patients and their family in the process of end-of-life care decision making.

• 대한약침학회지
• /
• 제3권2호
• /
• pp.213-232
• /
• 2000

Hemiplegic shoulder pain(HSP) is one of the most frequent and difficult problems affecting poststroke hemiplegic patients. Honeybee venom acupuncture therapy(BVAT) is known for its pain relieving effects in arthralgia. To evaluate the effectiveness of BVAT on HSP, 24 patients were sequential1y allocated into BVA T treatment group and control group and monitored for 4 weeks at time interval of initial(T0), 1 week(T1), 2 weeks(T2) and 4 weeks(T4). In treatment group, 1:10000 honeybee venom solution 0.2㎖ was injected into acupoint(s) following Deqi three times a week. Kyonu(LI15) was used in the first week. Thereafter Kyonu(LI15) and Nosu(SI10) were used. Visual analogue scale of pain severity showed significant decrease in treatment group compared to control group at T2 and T4 evaluation. Painless passive range of motion of shoulder external rotation showed significant increase in treatment group compared to control group at T4 evaluation. Fugl-Meyer Motor Assessment of upper limb motor function and Modified Ashworth scale of the spasticity of upper limb showed no difference between two groups. BVAT showed as an effective therapy in HSP and further extensive clinical studies are expected.

• 한국재료학회지
• /
• 제9권6호
• /
• pp.589-594
• /
• 1999

The effect of $\beta$-heat treatment on th microstructure, mechanical properties and texture in the nuclear fuel cladding of Zircaloy-4 tubes was chosen at 1000, 1100 and 120$0^{\circ}C$, and the tubes were heat-treated by a high frequency vacuum induction furnace. Morphology of the second phase particles and $\alpha$-grain of as-received tubes were markedly changed by heat treatment. The average sizes of second phase particles of as-received and $\beta$-heat treated tubes were 0.1$\mu\textrm{m}$ and 0.076$\mu\textrm{m}$, respectively. However, the average sizes of second phase particles were not much changed in the $\beta$-heated temperatures. With increasing heat treatment temperatures, the 0.2% yield strength and the hoop strength were decreased because of changes in preferred orientation as will as $\alpha$-plate width. Heat treated Zircaloy-4 tubes exhibited texture changes but the preferred orientation of grains still remained.

• 한국재료학회지
• /
• 제9권1호
• /
• pp.65-72
• /
• 1999

In order to minimize flexible printed circuit(FPC), which is used in computer, communication, medical facility, aviation space industry, it is required to improve the interfacial adhesion of polymide/epoxy or polyimide/polyimide consists of FPC. In this study, it was considered to improve the adhesion strength of polyimide/epoxy joint by introducing functional group on polyimide film and improving mechanical property of epoxy. Functional group on polyimide film was introduced by changing polyimide film surface to polyamic acid in KOH aqueous solution. The optimum conditions for surface modification were the concentration of 1M KOH and treatment time of 5min. Also, the optimum adhesion strength of polyimide/epoxy joint was obtained using rubber modified epoxy and polyamic acid as a base resin and curing agent of epoxy adhesive, respectively. The degree of surface modification of polyimide film examined with contact angle measurement of FTIR, thus modification of polyimide to polyamic acid was identified. Fracture surface of plymide/epoxy joint was analyzed by scanning electron microscopy, and modified polyamic acid reimidezed to polymide as increasing curing temperature.

• Transactions on Electrical and Electronic Materials
• /
• 제15권2호
• /
• pp.81-86
• /
• 2014

The process parameter in optimized KOH alkali activation of soft carbon series coke material in high purity was set with DOE experiments design. The activated carbon was produced by performing the activation process based on the set process parameters. The specific surface area was measured and pore size was analyzed by $N_2$ absorption method for the produced activated carbon. The surface functional group was analyzed by Boehm method and metal impurities were analyzed by XRF method. The specific surface area was increased over 2,000 $m^2/g$ as the mixing ratio of activation agent increased. The micro pores in $5{\sim}15{\AA}$ and surface functional group under 0.4 meq/g were obtained. The contents of the metal impurity in activated carbon which is the factor for reducing the electrochemical characteristics was reduced less than 100 ppm through the cleansing process optimization. The electrochemical characteristics of activated carbon in 38.5 F/g and 26.6 F/cc were checked through the impedance measuring with cyclic voltammetry scan rate in 50~300 mV/s and frequency in 10 mHz ~100 kHz. The activated carbon was made in the optimized activation process conditions of activation time in 40 minutes, mixing ratio of activation agent in 4.5 : 1.0 and heat treatment temperature over $650^{\circ}C$.

• 대한핵의학회지
• /
• 제22권1호
• /
• pp.93-98
• /
• 1988

$^{67}Ga$ scintigraphy has been used in the evaluation of sarcoidosis, particularly for delineating sites of involvement and grading activity. Three patients admitted in SNUH between Jan. 1986 and Jun. 1987 were diagnosed as sarcoidosis after clinical examination and $^{67}Ga$ scintigraphy. $^{67}Ga$ scintigraphy disclosed increased uptake of radioactivity in both hilar region, mediastinum, both lacrimal glands and parotid glands prior to treatment. In one case after prednisolon therapy, there was definit improvement of clinical findings and $^{67}Ga$ scintigraphy was normalized.

• 한국응용과학기술학회지
• /
• 제19권3호
• /
• pp.213-221
• /
• 2002

Activated carbons with high surface area of 2,600 $m^{2}/g$ and high pore volume of 1.2 cc/g could be prepared by KOH activation of rice hulls at a KOH:char ratio of 4:1 and $850^{\circ}C$. In order to increase the adsorption capacity of hydrogen sulfide, which is one of the major malodorous component in the waste water treatment process, various contents of $Na_{2}CO_{3}$ and $KIO_{3}$ were impregnated to the rice-hull activated carbon. The impregnated activated carbon with 5 wt.% of $Na_{2}CO_{3}$ showed improved $H_{2}S$ adsorption capacity of 75 mg/g which is twice of that for the activated carbon without impregnation and the impregnated activated carbon with 2.4 wt.% of $KIO_{3}$ showed even higher $H_{2}S$ adsorption capacity of 97 mg/g. The improvement of $H_{2}S$ adsorption capacity by the introduction of those chemicals could be due to the $H_{2}S$ oxidation and chemical reaction with impregnated materials in addition to the physical adsorption of activated carbon.

• Journal of Korean Neurosurgical Society
• /
• 제30권9호
• /
• pp.1144-1149
• /
• 2001

Schwannomas of the jugular foramen, originating from the glossopharyngeal nerve, vagus and accessory nerve represent approximately 0.17-0.72% of all intracranial tumor, and consists of 1.4-2.9% of all intracranial schwannomas. The clinical presentation of these tumors varies significantly according to originated nerve and it's growth pattern. Magnetic resonance(MR) image and temporal bone computed tomography(CT) scan have a major role for diagnosis of such tumor. The treatment of choice is total resection whenever possible. Generally, suboccipital approach is sufficient for the removal of the tumor, but in case with large size, combination of resection of petrous part of temporal bone with or without transection of sigmoid sinus is may be necessory. We have recently experienced one case of giant jugular foramen schwannoma and postoperative fatal complication in a 34-year-old male who was treated with combined posterior petrous and suboccipital approach with transection of sigmoid sinus

• 한국결정성장학회지
• /
• 제17권4호
• /
• pp.172-178
• /
• 2007

수평회전식 수열법에 의해 운모 분말을 합성하였다. 수열조건은 출발원료로 $K_2O,\;Al(OH)_3$ 그리고 $SiO_2$의 비는 1 : 3 : 3mol%로 하고 수열용매로 8mol%의 KOH를 함께 추가하여 $260^{\circ}C$에서 72시간 동안 반응시켰다. 합성한 분말은 수직형 수열처리법에 의한 은나노 코팅 운모 제조를 위해 사용하였다. 은나노 코팅의 처리를 위한 수열조건은 출발원료로 합성한 분말로 하고, 수열용매로 $0.5{\ell}$ 3차 증류수, 그리고 1,000ppm의 은나노 졸을 코팅원료로 사용하여 $160{\sim}260^{\circ}C$ 범위에서 72시간 동안 반응시켰다. 처리 후 결정구조, 은나노 코팅 여부 및 코팅된 운모의 특성은 XRD, SEM, TEH-EDX 및 shake plask법을 통해 분석하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.347.1-347.1
• /
• 2016

Screen printing is commonly used to form the electrode for crystalline silicon solar cells. However, it has caused high resistance and low aspect ratio, resulting in decrease of conversion efficiency. Accordingly, Ni/Cu/Ag plating method could be applied for crystalline silicon solar cells to reduce contact resistance. For Ni/Cu/Ag plating, laser ablation process is required to remove anti-reflection layers prior to the plating process, but laser ablation results in surface damage and then decrease of open-circuit voltage and cell efficiency. Another issue with plating process is ghost plating. Ghost plating occurred in the non-metallized region, resulting from pin-hole in anti-reflection layer. In this paper, we investigated the effect of Ni/Cu/Ag plating on the electrical properties, compared to screen printing method. In addition, phosphoric acid layer was spin-coated prior to laser ablation to minimize emitter damage by the laser. Phosphorous elements in phosphoric acid generated selective emitter throughout emitter layer during laser process. Then, KOH treatment was applied to remove surface damage by laser. At this step, amorphous silicon formed by laser ablation was recrystallized during firing process and remaining of amorphous silicon was removed by KOH treatment. As a result, electrical properties as Jsc, FF and efficiency were improved, but Voc was lower than screen printed solar cells because Voc was decreased due to surface damage by laser process. Accordingly, we expect that efficiency of solar cells could be improved by optimization of the process to remove surface damage.