• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.245-250
• /
• 2012

Branched polypropylenes (PP) with long chain branch were prepared by solid state reaction with three different branching agent of 0.3 wt% content. The chemical structures, non-isothermal crystallization behavior and complex viscosity of the branched PP were investigated by FTIR, DSC, optical microscope, and dynamic rheological measurement. The chemical structure of the branched PP was confirmed by the existence of =C-H stretching peak of the branching agent at 3100 $cm^{-1}$. There was no distinct change in melting temperature in case of PP-D-0-3 and PP-F-0-3, but PP-H-0-3 indicated a decrease in melting temperature. The decrease in melting temperature was interpreted by the fact that the degradation reaction of PP was more dominant than branched reaction, and confirmed by a decrease in complex viscosity. The non-isothermal crystallization behavior of the branched PP was analyzed using by Avrami equation. The Avrami exponent of PP was 3, and the values of the branched PP with DVB and FS were below 3. The activation energy of PP calculated by Kissinger method was 25 kJ/mol, and there were no big difference in activation energies of the branched PPs compared to PP.

• Nuclear Engineering and Technology
• /
• v.25 no.3
• /
• pp.361-370
• /
• 1993

Low power physics tests should be peformed for the domestic pressurized light water reactors (PWRs) after refueling. The tests are peformed to ensure that operating characteristics of the core are consistent with predictions and that the core can be operated as designed. But in some low power physics tests, slow but steady reactivity increasing phenomena were noticed after step reactivity insertion by the control rod movement. These reactivity increasing phenomena are due to the low flux level and the gamma background because an uncompensated ion chamber (UIC) is used as the ex-core neutron detector. The gamma background may affect the results or the lour power physics tests. The aims or this paper are to analyze the grounds of such phenomena, to simulate a reference bank worth measurement test and to present a resolution quantitatively. In this study, the gamma background level was estimated by numerically solving the point kinetics equations accounting the gamma background effect. The reactivity computer check test was simulated to verify the model. Also, an appropriate neutron flux level was determined by simulating the reference bank worth measurement test. The determined neutron flux level is approximately 0.3 of the nuclear heating flux. This level is about 3 times as high as the current test upper limit specified in the test procedure. Then, the findings from this work were successfully applied to Kori unit 4 cycle 7 and Yonggwang unit 1 cycle 7 physics tests.

• Journal of the Korean Vacuum Society
• /
• v.21 no.4
• /
• pp.219-224
• /
• 2012

We study for long-term performance of amorphous silicon solar cells under light exposure. The performance is predicted with a kinetic model in which the carrier lifetimes are determined by the defect density. In particular, the kinetic model is described by the stretched-exponential relaxation of defects to reach equilibrium. In this report, we simulate the light-induced degradation of the amorphous silicon solar cells with the kinetic model and AMPS-1D computer program. And data measured for outdoor performances of various solar cells are compared with the simulated results. This study focuses on examining the light-induced degradation for the following amorphous silicon pin solar cells: thickness${\approx}$300 nm, built-in potential${\approx}$1.05 V, defect density (at t=0)${\approx}5{\times}10^{15}cm^{-3}$, short-circuit current density (at t=0)${\approx}15.8mA/cm^2$, fill factor (at t=0)${\approx}0.691$, open-circuit voltage (at t=0)${\approx}0.865V$, conversion efficiency (at t=0)${\approx}9.50%$.

• Food Science and Preservation
• /
• v.22 no.1
• /
• pp.1-11
• /
• 2015

Raspberries are a good resource of polyphenols and have a powerful antioxidant activity, but shelf life for raspberries is short which brings a lot of economic losses. In this study, we try to use cool-air ($20{\sim}40^{\circ}C$) or hot-air ($60{\sim}100^{\circ}C$) to produce semi-dried raspberries with extended shelf life, and to determine the best method for improving fruit quality by minimizing nutrient losses during drying processes. The effects of process variables (drying temperature and processing time) on the quality of final dried raspberries were investigated. Response surface methodology was employed to establish statistical models for simulating the drying processes, and the moisture residue content and the loss ratios of total phenolic content (TPC), vitamin C (VC), and ellagic acid (EA) that result from the drying processes of raspberries using either hot or cool-air were predicted. Superimposed contour plots have been successfully used in the determination of the optimum zone within the experimental region. Optimal conditions determined for achieving minimal losses of TPC, VC, and EA, and a final moisture residue of 45% using the hot-air drying process were a drying temperature of $65.75^{\circ}C$ and a processing time of 4.3 hr. While for the cool-air process, the optimal conditions predicted were $21.3^{\circ}C$ and 28.2 hr. Successful application of response surface methodology provided scientific reference for optimal conditions of semi-drying raspberries, minimizing nutrient losses and improving product quality.

• Korean Journal of Food Science and Technology
• /
• v.37 no.5
• /
• pp.850-855
• /
• 2005

Model was developed to predict the growth of Listeria monocytogenes in raw pork. Experiment condition for model development was full 5-by-7 factorial arrangements of temperature (0, 5, 10, 15, and $20^{\circ}C$) and time (0, 1, 2, 3, 18, 48, and 120 hr). Gompertz values A, C, B, and M, and growth kinetics, exponential growth rate (EGR), generation time (GT), lag phase duration (LPD), and maximum population density (MPD) were calculated based on growth increased data. GT and LPD values gradually decreased, whereas EGR value gradually increased with increasing temperature. Response surface analysis (RSA) was carried out using Gompertz B and M values, to formulate equation with temperature being main control factor. This equation was applied to Gompertz equation. Experimental and predictive values for GT, LPD, and EGR, compared using the model, showed no significant differences (p<0.01). Proposed model could be used to predict growth of microorganisms for exposure assessment of MRA, thereby allowing more informed decision-making on potential regulatory actions of microorganisms in raw pork.

• Korean Journal of Food Science and Technology
• /
• v.16 no.2
• /
• pp.235-241
• /
• 1984

Two fractions of pectinesterase from Chinese cabbage were isolated by ammonium sulfate fractionation, ion exchange chromatography on DEAE-cellulose and Sephadex G-150 gel filtration. The fraction F-A and F-B were purified approximately 340- and 10-fold. The similar salt effects and pH optima (pH 7.5-8.0) were obtained for the two pectinesterase fractions. The maximum activity of both two. fractions were obtained at 20-50mM of divalent rations and at 250mM of monovalent rations. The apparent Michaelis constant of the F-A was 0.01% for citrus pectin. The temperature optima for F-A and F-B were $48^{\circ}$ and $55^{\circ}C$, respectively and both fractions were stable in the region of pH 5.0-8.0 at room temperature. The thermal inactivation of the two fractions followed the first order reaction kinetics. From D and Z-values obtained the thermal resistance of the two fractions were characterized.

• Korean Journal of Food Science and Technology
• /
• v.21 no.5
• /
• pp.676-685
• /
• 1989

Optimal operating conditions of on-farm red pepper dryer were searched by using the simulation-optimization algorithm combining the drying and quality deterioration models of red pepper with Box's complex method. Determination of control variables such as air temperature, air recycle ratio and air flow rate was based on a criterion of minimizing energy consumption under the constrainst conditions that satisfied the specified color retention of carotenoids. As quality constraint was stricter, energy consumption increased and total drying time decreased with lower recycle ratio and higher air flow rate Product mixing during drying was found to be able to improve the energy efficiency and product quality. Currently used air flow rate was assessed to be increased for the optimal operation. Two stage drying at the fixed optimal air flow rate was proven to be useful means for further saying of energy consumption. In the optimal bistaged drying, the second stage began at about one third of the total drying time and low air temperature in the first stage Increased to a high value and air recycle ratio increased slightly in the second stage. Optimal control variable scheme could be explained by the dryer performance and the carotenoids destruction kinetics in red pepper drying.

• KSBB Journal
• /
• v.20 no.1 s.90
• /
• pp.60-65
• /
• 2005

The objective of this work was to evaluate a solid-state fermentation process for the practical production of arachidonic acid(AA) by Mortierella alpina ATCC 32222. In the present investigation, batch culture kinetics for both submerged- and solid-state fermentations was carried out at $25^{\circ}C$ to identify the relationship between growth and arachidonic acid (AA) production. Glucose and yeast extract were used in submerged fermentations by using flasks, while rice bran was used as a sole raw material in the other type of fermentations by using a series of Petri dishes. It was evident that a mixed-growth associated pattern existed between the two variables, irrespective of modes of fermentations. The effect of carbon to nitrogen (CfN) ratio on AA production in solid-state fermentation was studied in the range of 6.5 - 20. As a result, an optimum condition was found to be 6.5. Supplementary carbon source was not necessary to meet the optimum C/N ratio. Unlike the Previous results obtained by other researchers, a supplement of sodium glutamate up to $4\%$ (w/w) to the rice bran medium did not have a positive effect on the AA productivity. However, an increase in AA productivity was obtained with the rice bran medium supplemented with sesame oil.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.2
• /
• pp.195-200
• /
• 1992

Rhizopus oryzae CJ-2114 was selected for its strong polygalacturonase activity among various strains of mold found in soil. The optimum pH for the enzyme activity was 4.0 and optimum temperature was 4$0^{\circ}C$. The activation energy for the polygalacturonase was calculated by Arrhenius equation was 2.048㎉/㏖. The reaction of this enzyme followed typical Michaelis-Menten kinetics with the Km value of 54.05mM with the $V_{max}$ of 13.9m mole/min. The enzyme is relatively stable in acidic condition. The activity of polygalactur-onase was inhibited completely by C $u^{2+}$, P $b^{2+}$ and Z $n^{2+}$, $_Mn^{2+}$ at concentration of 1 mM. The enzyme can be inactivated by the treatment with maleic anhydride and iodine. The results indicate the possible involvement of histidine at active site. When polygalacturonase from Rhizopus oryzae CJ-2114 was reacted with poly-galacturonic acid as a substrate mono-, di-, and oligogalacturonic acid were produced at early and mono-, digalacturonic acid produced at late incubation time. time.

• Korean Chemical Engineering Research
• /
• v.45 no.3
• /
• pp.242-248
• /
• 2007

For an optimal design of automotive electric system, it is important to have a reliable modeling tool to predict the charge-discharge behaviors of the automotive battery. In this work, a two-dimensional modeling was carried out to predict the charge-discharge behaviors of a 12-V automotive lead-acid battery. The model accounted for electrochemical kinetics and ionic mass transfer in a battery cell. In order to validate the modeling, modeling results were compared with the experimental data of the charge-discharge behaviors of a lead-acid battery. The discharge behaviors were measured with three different discharge rates of C/5, C/10, and C/20 at operating temperature of $25^{\circ}C$. The batteries were charged with constant current of 30A until the charging voltage reached to a predetermined value of 14.24 V and then the charging voltage was kept constant. The discharge and charge curves from the measurements and modeling were in good agreement. Based on the modeling, the distributions of the electrical potentials of the solid and solution phases, the porosity of the electrodes, and the current density within the electrodes as well as the acid concentration can be predicted as a function of charge and discharge time.