• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.1
• /
• pp.92-100
• /
• 2016

It is informed that the Voice over LTE(VoLTE) which serves voice and message on IP networks is better in terms of economies of scale than the legacy voice service on 2G/3G circuit-switched networks because of its technological and cost efficiency. In addition, services of voice and data are running on a single LTE network and as a result VoLTE has the more economies of scope. But, there is no study about how much technology-efficiency VoLTE has compared to circuit-based voice service and how much voice charge can be reduced as VoLTE grows up. This paper analyzes empirically cost-efficiency of VoLTE against circuit-based voice service and quantifies the reduction of voice charge as 2G/3G voice traffic shifts to VoLTE. The results describe the first is that the average cost of the total voice traffic rises shortly just after the investment of LTE network for providing VoLTE but it will soon have a capacity available to reduce the charge due to VoLTE's outstanding cost efficiency on the assumption that voice traffic is fixed, and the second is that the charge can be cut to 60% of the current rate in case of all the voice traffic moves to VoLTE. The latter proves partially the validation of data-focusing pricing plan. Our results are expected to become basic data for network operators' establishing pricing strategies and for policy makers' inducing price cutting.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.3
• /
• pp.588-594
• /
• 2015

Although GPS technology for location positioning system has been widely used, it is difficult to be used in intelligent transport systems, due to the large positioning error and limited area for receiving radio signals. Thanks to the rapid development of LED technology, LED lights become popular in many applications. Especially, visible light communications (VLC) has raised a lot of interests because of the simultaneous functioning of LED illumination and communication. Recent studies on positioning system using VLC mainly focused on indoor environments and still difficult to satisfy positioning accuracy and simple implementation simultaneously. In this paper, we propose a positioning system based on VLC using the coordinate information of LEDs installed on the road infrastructure. Extracting the LED signal, obtained through VLC, from the easily accessible camera image, it is possible to estimate the position of the car on the road. Simulation results show that the proposed scheme can achieve a high positioning accuracy of 1 m when large number of pixels is utilized and the distance from the LED light is close.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.2
• /
• pp.206-214
• /
• 2016

Recently, radio frequency energy transfer (RFET) attracts more and more interests for powering sensor nodes in the wireless sensor network (WSN). In the conventional WSN, reducing energy consumption of sensor nodes is of primary importance. On the contrary, in the WSN with RFET, reducing energy consumption is not an important issue. However, in the WSN with RFET, the energy harvesting rate of each sensor node depends on its location, which causes the unbalanced available energy among sensor nodes. Hence, to improve the performance of the WSN with RFET, it is important to develop network protocols considering this property. In this paper, we study this issue with jointly considering routing, scheduling, and power control in the WSN with RFET. In addition, we study this issue with considering two different objectives: 'Max-min' with which we tries to maximize the performance of a sensor node having the minimum performance and 'Max-min fairness' with which we tries to achieve max-min fairness among sensor nodes. We show that our solutions can improve network performance significantly and we also discuss the differences between 'Max-min' and 'Max-min fairness'.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.12
• /
• pp.1185-1194
• /
• 2012

This paper proposes a new terrestrial 3DTV broadcasting standard specification based on synchronization with non-real-time contents in order to overcome quality limitations of the current 3DTV services that are arisen from the limited bandwidth of the legacy broadcasting channel. In the services using the proposed specification, one view sequence of a stereoscopic video content is delivered as a non-real-time content in idle time, and the other view sequence is transmitted in real time broadcasting signal, thereafter two sequences are synchronized in a receiver for display. Thus, it is possible to provide higher-quality stereoscopic video content services than the current 3DTV services. In order to realize these services, a new mechanism is required which enables synchronization between the data that are from different transmission media and time. Therefore, this paper suggests a solution by multiplexing the synchronization signals of non-real-time contents into broadcasting signals with real-time streams together. This solution can provide a accurate synchronization mechanism by minimum updates of legacy broadcasting systems while maintaining compatibility with legacy services.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.12
• /
• pp.1318-1327
• /
• 2012

With the recent increased risk of livestock disease spread and human infection, livestock disease control has become very important. Consequently, there has been an increased attention on an implantable real-time monitoring and traceability system for individual cattle. Therefore, we have developed a robust monitoring and traceability system based on an implantable MFAN/RFID sensor tag. Our design combines the MFAN technology that is capable of robust wireless communication within cattle sheds and the 900MHz RFID technology that is capable of wireless communication without battery. In MFAN/RFID implantable sensor tag monitoring system, UHF sensor tag is implanted under the skin and accurately monitors the body temperature and biological changes without being affected by external environment. In order to acquire power needed by the tag, we install a MFAN/RFID tranceiver on the neck of cattle. The MFAN coordinator passes through the MFAN node and the RFID-reader-combined MFAN/RFID transceiver and transmits/receives the data and power for the sensor tag. The data stored in the MFAN coordinator is transmitted via the internet to the livestock history monitoring system, where it is stored and managed. By developing this system, we hope to alleviate the problems related to livestock disease control.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.12
• /
• pp.1310-1317
• /
• 2012

The Global Navigation Satellite System (GNSS) like US Global Positioning System (GPS) and EU Galileo are based on providing precise time and frequency synchronized ranging signals. Because of the exploitation of very precise timing signals these GNSS are used to provide both navigation and time distribution services. Moreover, because the positioning accuracy will improve as more satellites become available, we should expect that a combination of Galileo and GPS will provide better performance than those of both systems separately. However, Galileo will not use the same time reference as GPS and thus, a time difference arises - the GPS-Galileo Time Offset (GGTO). The navigation solution calculated by receivers using signals from both navigation systems will consequently contain a supplementary error if the GGTO is not accounted for. In this paper, we compared GPS Time (GPST) with Galileo Sytem Time (GST) and analyzed the effects of GGTO on positioning accuracy by simulation test. And then we also analyzed the characteristics of two representative GGTO correction methods such as the navigation message based method at system level and the estimation method at user level and propose the conceptual design of the novel correction method being capable of preventing previous method's problems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.12
• /
• pp.1076-1084
• /
• 2012

In the CS/CB(Coordinated Scheduling/Beamforming) scheme, the cell edge user throughput is increased by selecting MIMO (Multiple Input Multiple Output) precoders which can minimize the interferences from adjacent base stations (BSs). However, in current LTE(Long Term Evolution) systems, the serving cell is selected in the initialization stage by using the synchronization signals and cell specific reference signals transmitted by adjacent BSs with a single antenna. The selected BS in the initialization stage may not be the best one since the MIMO precoding gain has not been considered in the cell selection stage. In this paper, a new cell selection technique is proposed for LTE systems with MIMO precoder by taking into account the effect of the precoder in the initialization stage. The proposed technique enables a user equipment (UE) in the cell boundary to select the serving BS by using the information (channel rank, effective channel capacity, and effective SINR(Signal to Interference plus Noise Ratio)) acquired from cell specific reference signals of candidate BSs. It is verified by computer simulation that the proposed technique can increase the channel capacity significantly in the multi-cell environments, compared with the conventional CS/CB scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.12
• /
• pp.1054-1064
• /
• 2012

HDR (high dynamic range) tone mapping algorithms are used in image processing that reduces the dynamic range of an image to be displayed on LDR (low dynamic range) devices properly. The retinex is one of the tone mapping algorithms to provide dynamic range compression, color constancy, and color rendition. It has been developed through multi-scale methods and luminance-based methods. Retinex algorithms still have drawbacks such as the emphasized noise and desaturation. In this paper, we propose a multi scale tone mapping algorithm for enhancement of contrast, saturation, and noise of HDR rendered images based on visual brightness functions. In the proposed algorithm, HSV color space has been used for preserving the hue and saturation of images. And the algorithm includes the estimation of minimum and maximum luminance level and a visual gamma function for the variation of viewing conditions. And subjective and objective evaluations show that proposed algorithm is better than existing algorithms. The proposed algorithm is expected to image quality enhancement in some fields that require a improvement of the dynamic range due to the changes in the viewing condition.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7B
• /
• pp.795-805
• /
• 2011

The research on the immersive media technology is actively being done with the emergence of immersive services using immersive media, especially in the broadcasting industry and with the increased market demand for it. The industry which produces, transmits, processes and services the immersive contents is commonly called Immersive Media Industry. Immersive Media Industry has recently received attention as next-generation strategic industry with its high marketability and its high possibility of market expansion through convergence with other industry such as education, health, advertisement, travel and public service industry. As other advanccd country such as the U.S., Japan and Europe buckle down to take the innitiative in the immersive media industry, Korea government also begins to make plan to promote the immersive media industry. As above, immersive media industry is a cutting-edge convergence industry which embraces broadcasting, telecommunication and contents industry and it is rising as core growth engine industry. This article analyses the economic effects of immersive media industry through quantatitive method and evaluates the relations between the immersive media industry and the other related industries. As a result, the effect on production inducement of immersive media industry is 610.9 billion Korean Won; the effect on value-added inducement is 468.7 billion Korean Won; and it is measured that 3,258 job will be created by the immersive media industry.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.5
• /
• pp.271-279
• /
• 2014

In this paper, the two design techniques of the embedded system which provides a wireless image observation with temporary ad-hoc network are proposed and developed. The first method is based on the embedded system design technique for a nearly real-time wireless short observation application, having a specific remote monitoring node with a built-in image processing function, and having the maximum rate of 1 fps (frame per second) wireless image transmission capability of a $160{\times}128$size image. The second technique uses the embedded system for a general wireless long observation application, consisting of the main node, the remote monitoring node, and the system controller with built-in image processing function, and the capability of the wireless image transmission rate of 1/3 fps. The proposed system uses the wireless ad-hoc network which is widely accepted as a short range, low power, and bidirectional digital communication, the hardware are consisted of the general developed modules, a small digital camera, and a PC, and the embedded software based upon the Zigbee stack and the user interface software are developed and tested on the implemented module. The wireless environment analysis and the performance results are presented.