• Analytical Science and Technology
• /
• v.21 no.4
• /
• pp.284-295
• /
• 2008

For plastics samples, a method using combustion ion chromatography was selected as a method for rapid low-cost analysis to test whether hazardous substances are contained or not. Using combustion ion chromatography, a verification test for F, Cl and Br compounds generated a linear calibration curve with a correlation coefficient of $r^2$ = 0.999~1.000 in the calibration range from 0.5 to 4.0 mg/kg. The detection limits were found to be 0.005~0.024 mg/kg and quantitative limits were found to be 0.014~0.073 mg/kg. The recoveries of combustion ion chromatography using certified reference material (CRM) were found to be 95.5~104.9%. Based on these results, a proficiency test was conducted together with several laboratories in and out of the country, to make comparative analysis of the results from each laboratory. As a result, the data supported the use of combustion ion chromatography as an effective analysis method to deal with regulations for halogen-free electronic products and for other hazardous substances in the electronic products.

• KSBB Journal
• /
• v.10 no.1
• /
• pp.97-104
• /
• 1995

A computer simulation of biochemical process was carried out using Macintosh-based BioDesignerTM developed at Bioprocess and Engineering Center(BPEC) of MIT. Based on the assumptions and flask culture experiments, a porcine growth hormone (PGH, Porcine Somatotropin) production process was simulated by a two-stage continuous culture. The economical and sensitivity analyses were evaluated for the scale-up production of PGH. A high return on investment (ROI, 104%/year) suggested that the process be profitable. However, sensitivity analysis indicated that ROI was dependent on the yield of PGH, selling price, dose and the achievement of projected market penetration.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.2
• /
• pp.355-362
• /
• 2000

The objective of this paper is to estimate the pollutant load based on event mear concentrations(EMC) in industrial complex. Eight sub-basins in the Chongju industrial complex were selected for sampling and study with different characteristics during the period from June 1997 to August 1998. During the storm events, measured EMC ranges of $BOD_5$, COD, SS, TKN, TP, HEM, $NO_3-N$, $PO_4-P$, Cr, Pb, Cu and Fe in the industrial complex watersheds were 11~176mg/L, 40~502mg/L, 23~633mg/L, 104~20.9mg/L, 0.22~7.51mg/L, 12.7~548.7mg/L, 0.06~2.66mg/L, 0.12~3.39mg/L, 0.01~0.50mg/L. 0.02~0.42mg/L, 0.01~0.15mg/L and 1.29~11.51mg/L respectively. And the calculated annual average pollutant unit loadings of $BOD_5$ COD, SS, TKN, $NO_3-N$, $PO_4-P$, TP, HEM, Cr, Pb, Cu and Fe were 374.4kg/ha/yr 924.1kg/ha/yr, 983.6kg/ha/yr, 48.8kg/ha/yr, 8.1kg/ha/yr, 9.7kg/ha/yr, 17.8kg/ha/yr 943.0kg/ha/yr, 0.7kg/ha/yr, 0.9kg/ha/yr, 0.3kg/ha/yr and 28.9kg/ha/yr, respectively.

• The Korean Journal of Physiology
• /
• v.30 no.1
• /
• pp.97-104
• /
• 1996

Different neural substrates have been reported to be implicated in analgesic mechanisms in the acute phasic and the sustained tonic pains. To explore the differential antinociceptive action of diphenylhydantoin (DPH) and carbamazepine (CBZ) on the acute phasic and the tonic pains, changes in tail flick latency, hot plate latency and the formalin-induced nociceptive score were assessed prior to and after intraperitoneal administration of DPH (20 & 40 mg/Kg) and CBZ (20 mg/Kg). In 11 rats, CBZ was administered repeatedly for 6 days at the dose of 20 mg/Kg/day. Also studied were the effects of strychnine and picrotoxin (1 mg/Kg, i.p.) on the CBZ-produced changes in the formalin-induced pain behaviors. The tail flick and hot plate ltencies were not changes after administration of DPH and CBZ. However DPH strongly suppressed the formalin-induced tonic pain. A single and the repeated administration of CBZ inhibited both the early phasic and the late tonic pain responses to formalin in n similar manner. On the other hand, the antinociceptive actions of CBZ were not altered by strychnine or picrotoxin. These experimental findings lead to the conclusion that DPH and CBZ have differential antinociceptive action on the acute and the tonic pains and that their antinociceptive actions are independent of the GABA- and glycine-receptors.

• Journal of Environmental Health Sciences
• /
• v.26 no.4
• /
• pp.97-104
• /
• 2000

The purpose of this is made an examination of phosphorus loading model for eutrophication response in the Yongsan lake. For the model, we measured the total amount of nutrients derived from the Yongsan river watershed, inflow rate to the Yongsan lake, water quality, and water budget from January to December in 1999. The total amount of precipitation in the Yongsan river watershed was 4,951.7$\times$10$^{6}$ ㎥/y and inflow amount was 2,569.7$\times$10$^{6}$ ㎥/y, therefore the outflow rate of the Yongsan river watershed was 51.9%. The develop loading of total nitrogen was 86,928.1kg/d and that of total phosphorus was 22,007.6kg/d at the Yongsan river watershed, But, as the inflow loading of total nitrogen was 33,962kg/d and the inflow loading of total phosphorus was 2,218kg/d to the Yongsan lake. so each infolw rate was 39.0% and 10.1%. The hydraulic residence time was 34days, total phosphorus loading [L(P)] on the surface area was 23.398g/㎥/y, the hydraulic load( $Q_{s}$) of inflow water was 74.269m/y, the reserve rate of phosphorus in the lake was 0.359, and the settinh velocity of phosphorus was 0.114m/d at the Yongsan lake. Mathematical model of phosphorus loading to estimate the responses of eutrophication at the Yongsan lake is [ $P_{j}$] = 0.838 [L(P)/Q.(1+√ $T_{w}$)$^{-1}$ ] . ] . .

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.8
• /
• pp.1181-1187
• /
• 2016

The objective of the study was to evaluate fattening performance, carcass value and meat quality in pigs of Prestice Black-Pied breed in relation to slaughter weight (SW) and gender (barrows and gilts, resp.). Pigs were divided into weight categories: SW1 (75 to 99.9 kg), SW2 (100 to 109.9 kg) and SW3 (110 to 130 kg) and all individual traits were analyzed by the general linear model procedure (SAS 9.3). Average SW of each weight group was as follows: SW1 94.2 kg, SW2 105.8 kg, and SW3 115.2 kg. Differences among average backfat thickness of 36.07 mm in SW1, 40.16 mm in SW2, and 43.21 mm in SW3 were significant (p<0.01). Lean meat content was 48.94% (SW1), 48.78% (SW2), and 48.76% (SW3). Pigs were slaughtered at average weight of 105.7 kg for barrows and 104.4 kg for gilts. Average backfat thickness for barrows was 40.90 mm and 38.72 mm for gilts (significant difference p<0.05). Lean meat content was 48.75% in barrows and 48.91% in gilts. The values of pH45, characterizing the meat of very good quality. The loin in SW3 was darker than the muscles of SW1 and SW2. Drip loss was the lowest in SW1 (1.96%), compared to the highest drip loss in SW3 (2.59%). Content of intramuscular fat was 2.68% in SW3, 2.79% in SW2, and SW1 had the lowest content 2.47%. The values of pH45, colour lightness and drip loss were similar in both genders. However barrows had higher intramuscular fat content by 0.31% than gilts (p<0.05).

• Solar Energy
• /
• v.18 no.2
• /
• pp.91-104
• /
• 1998

This study carried out a numerical analysis on a heat pump assisted dryer using HFC134a. Under the constant degree of superheat and that of subcooling, we analyzed the performance of heat pump assisted dryer with varying an air mass velocity, bypass air ratio, compressor speed and an inlet bulb temperature of dryer. Simulation results were compared with experimental results, so they were maximally agreed in the range of 10%. There was the proper bypass air ratio with varying an air mass velocity. As for the effect of SMER having the inlet temperature $35^{\circ}C$ and compressor speed 1360rpm, bypass air ratio was 30% at the front velocity 0.5kg/s, 40% at the front velocity 0.7kg/s and 50% at the front velocity 0.9kg/s and 1.1kg/s. As the compressor speed was increased, SMER decreased and COP increased. As the inlet bulb temperature was increased, SMER and COP decreased.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.36 no.4
• /
• pp.280-286
• /
• 2016

This study was conducted to evaluate the growth characteristics and dry matter yields of Italian ryegrass (Lolium multiflorum Lam., IRG) cultivars for three years (2011~2013). The cold-resistance of domestic cultivars was stronger than other foreign varieties. Among early-maturing cultivars, dry matter (DM) yield of 'Kowinearly' was significantly higher (8,751 kg/ha) than other cultivars (p<0.05). In medium-maturing cultivars, DM yield of 'Kowinmaster' and 'Tam 90' was 9,394 and 7,461 kg/ha, respectively. Of the two, the former's DM yield was higher than the latter's (p<0.05). Among late-maturing cultivars, DM yield of 'Hwasan 104' (9,809 kg/ha) was similar to 'Hwasan 101' (9,354 kg/ha), but significantly higher than the other late-maturing cultivars (p<0.05). According to the results obtained from present study, early-maturing cultivars with cold-tolerance and high productivity is required for the paddy field cultivation of an Italian ryegrass cultivar after rice harvest in Cheonan region. Medium- and late-maturing cultivars are more advantageous for the dry field cultivation of the maximum quantity that is possible. In conclusion, to select which cultivar/s to grow, the climate of the growing area, weather conditions, and the cropping system must all be considered.

• The Korean Journal of Pesticide Science
• /
• v.13 no.4
• /
• pp.241-248
• /
• 2009

Pre-Harvest Residue Limit (PHRL) of bifenthrin during cultivation of grape was established by utilizing the dissipation curve and biological half-life of bifenthrin calculated from the analysis of 0, 1, 2, 3, 5, 7, 10, 15 days after treatment of bifenthrin. Grape sample was extracted and partitioned with acetonitrile and dichloromethane, respectively, and bifenthrin was determined with GC/ECD. Limit of quantitation (LOQ) of bifenthrin was 0.01 ng. Recoveries at two fortification levels of 0.1 and $0.5\;mg\;kg^{-1}$ were $104.08\;{\pm}\;1.24$ and $92.25\;{\pm}\;3.13%$, respectively. The biological half-lives of bifenthrin were about 21 days at standard application rate, while, 23 days at double application rate. Dissipation of bifenthrin on grape was not influenced by growth dilution effect. The PHRLs of bifenthrin were recommended as 0.60 and $0.55\;mg\;kg^{-1}$ for 10 and 5 days before harvest, respectively.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.104-104
• /
• 2019

표고(Lentinula edodes)에 다량 함유되어 있는 아미노산은 면역효과와 밀접한 관련이 있는 것으로 알려져 있다. 표고 특유의 향미에 대한 소비자들의 선호도가 상이하여, 표고를 맥아로 당화하여 소비자들의 섭취 편이성을 향상시키고, 아미노산을 포함한 당화액을 제조하여 면역효과가 증강된 제품을 개발하고자 본 연구를 수행하였다. 또한 버섯류를 비롯한 담자균류에는 다양한 약효성분이 함유되어 있어 민간에서도 자주 사용된 기록이 있다. 최근 고등담자균류인 버섯의 성분 및 유용성에 관심이 크게 증가하고 있는 추세이며, 이에 따라 버섯류에 대한 식품학적 및 약리학적 측면에서 연구가 활발히 진행되고 있다. 표고(L.edodes)와 당화효소로 사용한 맥아의 비율에 따라 A (표고 1 kg : 맥아 50 g), B (표고 1 kg : 맥아 100 g), C (표고 1 kg : 맥아 200 g), D (표고 1 kg : 맥아 300 g), E (표고 1 kg : 맥아 300 g) 5개의 시험구를 설정하였으며, 제조된 표고당화액을 농축 후 동결건조 하여 분말로 분쇄 후 시료로 사용하였다. 표고당화액의 면역효과를 검증하고자, Raw 264.7에 표고당화추출분말 A, B, C, D, E를 각각 10, 50, 100 및 $500{\mu}g/mL$의 농도로 처리하여 각 시료에 대한 세포 독성과 항염증효과를 확인하였다. 세포독성 시험결과, E 시험구의 경우 $100{\mu}g/mL$의 농도에서 75.3%, $500{\mu}g/mL$의 농도에서 66.3%의 세포생존율을 나타내 독성을 보였다. 또한 A, B, D를 각각 $500{\mu}g/mL$의 농도로 처리 했을 때, 94.1%, 83.1%, 80.2%의 NO 생성율을 나타내어 E 시험구를 제외하고는 세포독성이 없는 것으로 확인되었다. 표고당화추출분말의 구성아미노산 함량은 C 시험구에서 19,699.01 mg%로 가장 높게 나타났으며, A 시험구에서 17,231.14 mg%, B 시험구에서 17,152.38 mg%순으로 높게 나타났다. E 시험구에서 13,367.98 mg%로 가장 낮게 나타났다. 모든 표고당화추출분말에서 총 16종의 유리아미노산 이 검출 되었으며, C 시험구에서 2,562.06 mg%로 가장 높게 나타났고, B 시험구에서 2,243.16 mg%, D 시험구에서 1,895.29 mg%, A 시험구에서 1,672.82 mg%순으로 높게 나타났다.