• Current Photovoltaic Research
• /
• v.3 no.2
• /
• pp.65-70
• /
• 2015

We applied KF on CIGS film to modify CIGS surface with a wider-bandgap surface layer. With the KF deposition the surface of CIGS film had fine particle on the CIGS surface at 350 and $300^{\circ}C$. No fine particle was detected at 500 and $250^{\circ}C$. With the KF treatment, the Ga and O content increased at the surface, while the In and Cu content decreased. The valence band maximum was lowered with KF treatment. The composition profile and band structure were positive side of applying KF on the CIGS surface. However, the efficiency decreased with the KF treatment due to high series resistance, probably due to too thick surface layer. A smaller amount of KF should be supplied and more systematic analysis is necessary to obtain a reproducible higher efficiency CIGS solar cells.

• Applied Chemistry for Engineering
• /
• v.27 no.3
• /
• pp.270-275
• /
• 2016

High density polyethylene (HDPE)/kenaf fiber (KF) composites included two types of KF with different lengths were fabricated by using a twin screw extruder. A thermally expandable microcapsule (EMC) was used to form HDPE/KF. The KF lengths were 0.3 mm and 3 mm. The contents of KF and EMC were fixed at 20 wt% and 5 wt%, respectively. From FT-IR data of KF, which underwent chemical treatment, peaks around 1700 and $1300cm^{-1}$ decreased. This might be caused by the reduction of lignin and hemicellulose due to the chemical treatment of KF. Based on the specific gravity, thermal stability and tensile property, physical properties of the composites with a 3 mm fiber were good. However, if the fiber is longer, poor appearance might be caused due to the thermal degradation during processing. Thus, the adequate length of KF should be chosen to maintain the appearance and physical properties for industrial applications of HDPE/KF/EMC composites. The tensile strength for 0.3 mm fiber treated with chemicals increased slightly.

• Current Photovoltaic Research
• /
• v.3 no.4
• /
• pp.130-134
• /
• 2015

The high efficiency cell research processes through the KF post deposition treatment (PDT) of the $Cu(In,Ga)Se_2(CIGS)$ thin film has been very actively progress. In this study, it CIGS thin film deposition process when KF PDT 300 to the processing temperature, 350, $400^{\circ}C$ changed to soda-lime glass (SLG) efficiency of the CIGS thin film characteristics, and solar cell according to Na presence of diffusion from the substrate the effects were analyzed. As a result, the lower the temperature of KF PDT and serves to interrupt the flow of current K-CIGS layer is not removed from the reaction surface, FF and photocurrent is decreased significantly. Blocking of the Na diffusion from the glass substrate is significantly increased while the optical voltage, photocurrent and FF is a low temperature (300, $350^{\circ}C$) in the greatly reduced, and in $400^{\circ}C$ tend to reduce fine. It is the presence of Na in CIGS thin film by electron-induced degradation of the microstructure of CIGS thin film is expected to have a significant impact on increasing the hole recombination rate a reaction layer is formed of the K elements in the CIGS thin film surface.

• Korean Journal of Materials Research
• /
• v.27 no.9
• /
• pp.495-500
• /
• 2017

Oxide layers were formed by an environmentally friendly plasma electrolytic oxidation (PEO) process on AZ91 Mg alloy. PEO treatment also resulted in strong adhesion between the oxide layer and the substrate. The influence of the KF electrolytic solution and the structure, composition, microstructure, and micro-hardness properties of the oxide layer were investigated. It was found that the addition of KF instead of KOH to the $Na_2SiO_3$ electrolytic solution increased the electrical conductivity. The oxide layers were mainly composed of MgO and $Mg_2SiO_4$ phases. The oxide layers exhibited solidification particles and pancake-shaped oxide melting. The pore size and surface roughness of the oxide layer decreased considerably with an increase in the concentration of KF, while densification of the oxide layers increased. It is shown that the addition of KF to the basis electrolyte resulted in fabricating of an oxide layer with higher surface hardness and smoother surface roughness on Mg alloys by the PEO process. The uniform thickness of the oxide layer formed on the Mg alloy substrates was largely determined by the electrolytic solution with KF, which suggests that the composition of the electrolytic solution is one of the key factors controlling the uniform thickness of the oxide layer.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.3
• /
• pp.156-160
• /
• 2005

We studied the effect of SMP (solid matrix priming) treatment, seed pretreatment for germination enhancement, to tobacco seeds by measurement of germination rate and contents of fatty acid, energy source for tobacco germination. The results were as follows. In result of germination test, germinative ability was the highest in KF109 at nine day treatment and in KB108 at seven day treatment. The composition of fatty acid in tobacco seed confirmed by gas chromatography were palmitic acid, stearic acid, oleic acid+elaidic acid, linoleic acid+linole­laidic acid, and $\alpha-linolenic$ acid. Palmitic acid, stearic acid, oleic acid and elaidic acid, and linoleic acid and linole-laidic acid were highest in KF109 at eight or nine day treatment and in KB108 at six or seven day treatment. Especially, content of oleic acid + elaidic acid, and linoleic acid+linolelaidic acid were changed largely by treatment, so these might be used for index to examine treatment effect.

• Current Photovoltaic Research
• /
• v.6 no.2
• /
• pp.56-61
• /
• 2018

In this study, CIGS absorber layers were deposited on low-alkali glass and sodalime glass substrates and potasium floride (KF) of various thicknesses was supplied at an elevated temperature after the CIGS growth. The effect of KF post-deposition treatment on the two types of substrates was extremely different. On the low-alkali substrate, the open-circuit voltage (Voc) was improved but the fill-factor (FF) degradation was severe, whereas the sodalime substrate showed Voc deterioration and FF improvement. In the case of supplying 20 nm of KF on both substrates, the efficiency gain of 0.3~1.1%p was obtained. With increasing the KF thickness, a small protrusion-like microstructure developed on the surface of the absorber layer, and the microstructures that were not removed in the subsequent process were found to be the main cause of the FF loss.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.9
• /
• pp.1532-1536
• /
• 2015

To investigate the memory-enhancing effect of lactic acid bacteria, we selected the probiotic mixture KF, which consisted of Lactobacillus plantarum KY1032 and Lactobacillus curvatus HY7601 (1 × 10¹¹ CFU/g of each strain), and investigated its antilipidemic and memoryenhancing effects in aged Fischer 344 rats. KF (1 × 10¹⁰ CFU/rat/day), which was administered orally once a day (6 days per week) for 8 weeks, significantly inhibited age-dependent increases of blood triglyceride and reductions of HDL cholesterol (p < 0.05). KF restored agereduced spontaneous alternation in the Y-maze task to 94.4% of that seen in young rats (p < 0.05). KF treatment slightly, but not significantly, shortened the escape latency daily for 4 days. Oral administration of KF restored age-suppressed doublecortin and brain-derived neurotrophic factor expression in aged rats. Orally administered KF suppressed the expression of p16, p53, and cyclooxygenase-2, the phosphorylation of Akt and mTOR, and the activation of NF-κB in the hippocampus of the brain. These findings suggest that KF may ameliorate age-dependent memory deficit and lipidemia by inhibiting NF-κB activation.

• Journal of Animal Environmental Science
• /
• v.16 no.1
• /
• pp.81-92
• /
• 2010

This study was conducted to evaluate the effects of fermented diets including liquid by-products on nutrient digestibility and nitrogen balance in growing pigs. Treatments were 1) CON (basal diet), 2) F (fermented diet with basal diet), 3) KF (fermented diet with basal diet including 30% kale pomace), 4) AF (fermented diet with basal diet including 30% angelica keiskei pomace), 5) CF (fermented diet with basal diet including 30% carrot pomace) and 6) OF (fermented diet with basal diet including 30% grape pomace). A total of 24 pigs (41.74kg average initial body weight, Landrace $\times$ Yorkshire $\times$ Duroc), were assigned to 6 treatments, 4 replicates and 1 pig per metabolic cage in a randomized complete block (RCB) design. Pigs were housed in $0.5\times1.3m$ metabolic cage in a 17d digestibility trial. During the entire experimental period, Digestibility of dry matter (p<0.05) of treatment CON, F and CF were higher than other treatments. In crude protein digestibility, treatment F was higher than treatment AF and GF (p<0.05). Treatment GF showed the lowest digestibility of crude fiber among all treatments (p<0.05). In ether extract digestibility, treatment AF and CF showed higher than other treatments (p<0.05) except KF treatment. CF treatment showed the best digestibility of ash among all treatments (p<0.05). Whereas, For Ca and P digestibility, CF and OF treatments were improved than other treatments (p<0.05). Energy digestibility (p<0.05) of CON, F and CF treatments were higher than KF, AF and GF treatments. In total essential amino acid digestibility, F treatment was improved than AF, CF and GF treatments (p<0.05). In total non-essential amino acid digestibility, F treatment was higher than CON, AF and GF treatments (p<0.05). In total amino acid digestibility, F treatment was higher than AF and CF treatments (p<0.05) and GF treatment showed the lowest digestibility (p<0.05). In fecal nitrogen excretion ratio, GF treatment was greatest among all treatments (p<0.05) and F treatment was decreased than other treatments (p<0.05). In urinary nitrogen excretion ratio, CON and GF treatments showed the lowest among all treatments (p<0.05). In nitrogen retention ratio, CON treatment showed the high and KF treatment showed the lost among all treatments (p<0.05). Therefore, this experiment suggested that fermented diet could improve nutrient and amino acid digestibilities of growing pigs.

• Fashion & Textile Research Journal
• /
• v.23 no.3
• /
• pp.406-414
• /
• 2021

This study aimed to evaluate the inhalation resistance(IR) and fiber structure of disposable masks when exposed to repeated heating and ultraviolet(UV) sterilization. The experiments consisted of a lab-scale and a field test. For the lab-scale test, KF94 and N95 masks were selected and a trial was composed of three repetitions of an 80-min sterilization. For the field test, a subject participated over four days, of which a KF94 was worn without sterilization, and the same trial was conducted during the next four days with daily sterilization. The results showed that the IR of the KF94 mask(9.5 Pa) gradually increased according to the sterilization up to the second repetition(15.6 Pa) but decreased at the third treatment(9.7 Pa). However, the N95 mask did not showany tendency of IR during the repetitions. Microscope photos showed several warped or blackened fibers in the stiffener layer after the repeated sterilization. After wearing a KF94 mask for four consecutive days, its IR decreased until the three days but increased the fourth day, whereas another KF94 mask with sterilization showed an increase in IR for the four days. In the microscope-photos after the consecutive four days, outside fibers and stiffener layers were warped or became less dense. In summary, the IR of the KF94 mask slightly increased through the three~four rounds of heating and UV sterilizations, but the fiber structures were not significantly deformed by the repeated sterilization. To reduce discarded mask waste, the repeated sterilization of masks can be recommended.

• Journal of the Korean Society of Tobacco Science
• /
• v.25 no.2
• /
• pp.111-119
• /
• 2003

In this work, Rayon-based activated carbon fiber(KF-1500) was treated by HN $O_3$ and $H_2$S $O_4$ with different conditions. Specific surface areas(SSA, $S_{BET}$) of the treated activated carbon fibers were decreased by acidic treatment but, total surface acidities and surface functional groups were increased. In spite of the decrease of SSA, propylamin(PPA) adsorption and removal ability by activated carbon fiber(ACF) were increased by nitric acid treatment compared with the raw-ACF(KF-1500) and coconut based activated carbon. However, acidic treated activated carbon fibers were available to removal for various amines and contaminants by adsorption.n.