• 제목/요약/키워드: KAU

검색결과 70건 처리시간 0.027초

초음속 연마가공 노즐의 성능개선에 관한 연구 (Improvement of the Performance of the Supersonic Abrasive Blasting Nozzle)

  • 곽지영;전익준;박세은;이열
    • 한국기계가공학회지
    • /
    • 제15권2호
    • /
    • pp.9-15
    • /
    • 2016
  • The dynamics of gas-particle flow from a supersonic abrasive blasting nozzle have been studied by 1-D analytical calculation, including wall friction effects inside the nozzle. The developed code in the present study shows a satisfactory agreement with the other study's results. By utilizing the code, the redesign and optimization of the inner contour of a commercial abrasive blasting nozzle were carried out, and it was found that the redesigned nozzle in the present study can produce faster particle velocities at the nozzle exit by up to 22% compared with the original commercial nozzle.

한국항공대학교 저고도 장기체공 태양광 무인기 개발에 관한 연구 (3) - 태양광 무인기 비행실험 결과 및 분석 - (A Study on the Development of Low-Altitude and Long-Endurance Solar-Powered UAV from Korea Aerospace University (3) - Flight Test Results and Analysis of Solar Powered UAV -)

  • 김도영;김태림;정재백;박상혁;배재성;문석민
    • 한국항공우주학회지
    • /
    • 제50권7호
    • /
    • pp.489-496
    • /
    • 2022
  • 본 논문에서는 한국항공대학교에서 설계 및 개발한 태양광 무인기인 KAU-SPUAV의 시스템을 소개하고 비행시험을 통하여 성능을 검증하였다. 두 가지 버전의 태양광 무인기의 제원과 전장 구성 그리고 지상 관제 시스템을 소개하였다. 제시한 시스템으로 전파맵 구축, 제주도 해안선 일주 그리고 장기 체공 비행의 세 가지 임무 비행을 수행하였다. 각 임무는 태양광 무인기의 특성을 이용하는 비행으로서 주로 장시간 및 장거리 임무로 구성되었다. 본 연구를 통하여 태양광 무인기의 장기체공 능력을 이용해 다양한 임무에 사용될 수 있음을 보였다. 비행 시험 결과를 기반으로 시스템 추가 개선을 통하여 성능 향상을 도모할 수 있음을 확인하였다.

한국항공대학교 저고도 장기체공 태양광 무인기 개발에 관한 연구 (2) - 태양광 무인기 비행제어 및 유도항법 - (A Study on the Development of Low-Altitude and Long-Endurance Solar-Powered UAV from Korea Aerospace University (2) - Flight Control and Guidance of Solar Powered UAV -)

  • 김태림;김도영;정재백;문석민;김용래;배재성;박상혁
    • 한국항공우주학회지
    • /
    • 제50권7호
    • /
    • pp.479-487
    • /
    • 2022
  • 본 논문에서는 한국항공대학교에서 연구, 개발한 태양광 무인기 KAU-SPUAV의 자동 비행을 위한 제어기 설계 및 유도기법에 관하여 기술했다. 와류격자법을 활용하여 공력계수들을 계산했고 이를 항공기의 6자유도 방정식에 적용했다. 또한 깃요소이론을 활용하여 프로펠러의 추력 및 토크계수를 계산했다. 상승풍을 맞닥뜨렸을 때 효율적으로 활공하기 위하여 추력을 사용한 고도제어기가 KAU-SPUAV에 사용되었다. 또한 태양광 무인기의 장기체공 임무를 위해 운용 중에 발생하는 바람의 영향을 고려하기 위한 바람 추정 기법을 적용하였고, 강한 맞바람에 대처하기 위한 유도기법과 자동 착륙 알고리즘을 구성하였으며 2021년 8월, 56시간 33분의 태양광 장기체공 실험을 통해 제어 및 유도기법의 성능을 검증하였다.

급성 파라콰드중독후 생존한 15예 환자의 임상적 고찰 (Clinical study of the 15patients survived after acute paraquat intoxication)

  • 김동웅
    • 대한예방한의학회지
    • /
    • 제3권1호
    • /
    • pp.36-36
    • /
    • 1999
  • From January 1994 to April 1997, there was 15 survivals who was admitted to the department of internal medicine, Wonkwang Oriental Medicine' Hospital in Cheun-ju, after ingestion of paraquat, and treated with Oriental and western medicine therapy. For the patients, I investigated clinical symptoms, gastroduodenoscopy, intake by oral and parenteral route, and output by urine and stool, serum ALP, AST. ALT, Bilirubin, BUN, Creatinine level and urine analysis. On admission day, the LFT level was as follows. The serum mean ALP, AST, ALT, Total Bilirubin and Direct Bilirubin was 10.05${\pm}$2.75 KAU, 66.67${\pm}$9.88 IU/L, 43.80${\pm}$7.74 IU/L, 1.89${\pm}$1.22 ㎎/dl and 1.10${\pm}$1.14 ㎎/dl respectively. After that day, administered Gamdutang and checked the mean LFT level regullary. Until the 3rd day, the mean ALP, AST, ALT, Total Bilirubin and Direct Bilirubin level was 11.0l${\pm}$3.16 KAU, 56.47${\pm}$7.19 IU/L, 59.00${\pm}$7.57 IU/L, 2.54${\pm}$1.78 ㎎/dl, 1.64${\pm}$1.59 ㎎/dl respectively. From 4th day to 7th day, the mean ALP; AST, ALT, Total Bilirubin and Direct Bilirubin level was 12.51${\pm}$3.49 KAU, 77.85${\pm}$7.17 IU/L, 58.00${\pm}$9.09 IU/L, 2.54${\pm}$1.97 ㎎/dl, and 1.80${\pm}$1.81 ㎎/dl respectively. From 8th day to 10th day, the mean ALP, AST, ALT, Total Bilirubin and Direct Bilirubin level was 12.43${\pm}$3.14 KAU, 41.13${\pm}$6.49 IU/L, 50.40${\pm}$7.17 IU/L, 1.66${\pm}$1.90 ㎎/dl and 1.14${\pm}$1.50 ㎎/dl respectively. From 11th day to 14th day, the mean ALP, AST, ALT, Total Bilirubin and Direct Bilirubin level was 12.30${\pm}$3.25 KAU, 31.07${\pm}$3.85 IU/L, 43.33${\pm}$5.49 IU/L, 1.62${\pm}$1.95 ㎎/dl, 1.17${\pm}$1.71 ㎎/dl respectvely. On admission day, the mean RFT level as follows. Serum BUN and Creatinine level was 28.73${\pm}$5.19 ㎎/dl and 1.82${\pm}$1.27 ㎎/dl respectively. After that day, administered Gamdutang and checked the mean RFT level regullary. Until the 3rd day, the mean BUN and Creatinine level was 32.12${\pm}$5.65 ㎎/dl and 2.31${\pm}$0.45 ㎎/dl respectively. From 4th day to 7th day, the mean BUN and Creatinine level was 31.07${\pm}$5.47 ㎎/dl and 1.92${\pm}$0.79 ㎎/dl respectively. From 7th day to 10th day, the mean BUN and Creatinine level was 17.47${\pm}$3.57 ㎎/dl and 1.33${\pm}$0.59 ㎎/dl respectively. From 11th day to 14th day, the mean BUN and Creatinine level was 11,93${\pm}$3.16 ㎎/dl, 1.27${\pm}$0.38 ㎎/dl respectively.

Wind tunnel section model study of aeroelastic performance for Ting Kau Bridge Deck

  • Brownjohn, James Mark William;Choi, Cheong Chuen
    • Wind and Structures
    • /
    • 제4권5호
    • /
    • pp.367-382
    • /
    • 2001
  • Wind tunnel tests were conducted on a model of deck section from the Ting Kau cable stayed bridge. The purpose of the tests was to determine the set of aerodynamic derivatives conventionally used to describe the motion-induced forces arising from the wind flow, and to investigate the stability of the deck under different conditions of turbulence and angle of attack. The study shows that except for large negative angles of attack the deck section itself is stable up to a high wind speed, and that when instability does occur it is essentially a single degree of freedom (torsional) flutter.

캔틸레버(Cantilever) 형태의 전극 어레이(array)를 이용한고속 분리 시스템 (High throughput sorting(HTS) system using a cantilever-type electrode array)

  • 이정훈;김영호;김영근;김병규
    • 센서학회지
    • /
    • 제19권2호
    • /
    • pp.112-117
    • /
    • 2010
  • A high-throughput sorting (HTS) system has been designed to separate target particles using a negative dielectrophoretic (n-DEP) force. The system consists of a meso-sized channel and a cantilever-type electrode(CE) array designed to separate a large number of target particles by discerning subtle difference of weight and dielectric material property of the particles. Using the polystyrene beads with various sizes of 10, 25 and $50{\mu}m$, the developed system exhibits high-throughput sorting of about 200 beads/sec and more than 80 % of separation efficiency.

600 mm 급 다기능 광폭 센터리스 연삭시스템 개발 (Development of Multi-functional Centerless Grinding System with 600 mm Wide Grinding Wheels)

  • 오정수;조창래;쯔끼시마 히데히로;조순주;박천홍;오정석;황인범;이원재;김석일
    • 한국정밀공학회지
    • /
    • 제30권11호
    • /
    • pp.1129-1137
    • /
    • 2013
  • We report a centerless grinding machine which can perform multi-function with 600 mm wide grinding wheels. By increasing manufacturing area, long workpiece such as camshaft and steering shaft, is allowed to grind more quickly, compared with cylindrical grinding system. In this paper, the design of centerless grinding machine puts emphasis on symmetry to exploit the thermal stability. Results of finite element analysis shows that the difference of the structural deflection in the front and rear guideways is less than $1.5{\mu}m$ due to symmetric design. The difference is less than $3.0{\mu}m$, even though the thermal deformation is considered. According to the performance evaluation, the radial error motion of the G/W spindle, which is measured by applying Donaldson Ball Reversal, is about 1.1${\mu}m$. The yaw error of the G/W slide is improved from 2.1 arcsec to 0.5 arcsec by readjusting the slide preload and ball screw.

베트남 북부 카우록 다중금속 산출지의 특성: 예비연구 (Characteristics of Polymetallic Occurrence in Kau Loc Area within Northern Vietnam: Preliminary Study)

  • 허철호;지세정;박성원;이재호
    • 자원환경지질
    • /
    • 제44권5호
    • /
    • pp.345-357
    • /
    • 2011
  • 베트남 북부 카우록 광화대의 연-아연, 텅스텐 산출지에 대한 지질광상조사를 실시했다. 연-아연 산출지는 석회암층의 층리에 평행하게 광체를 배태하고 었다. 지표품위와 지질학적 매장량을 고려할 때, 연-아연 산출지는 소-중규모로 판단된다. 반면 데본기 석회암을 관입하고 있는 소규모 암주의 분포를 고려할 때, 텅스텐 산출지는 스카른 광화작용의 부존이 기대되는 적절한 조건을 가지고 있다. 그러나, 정밀지질광상조사가 결여되었기 때문에 현재 상황에서 경제적 타당성을 인지할 만한 증거는 없는 것으로 사료된다.

Effects of Glass Texturing Structure on the Module Efficiency of Heterojunction Silicon Solar Cells

  • Park, Hyeongsik;Lee, Yoo Jeong;Shin, Myunghun;Lee, Youn-Jung;Lee, Jaesung;Park, Changkyun;Yi, Junsin
    • Current Photovoltaic Research
    • /
    • 제6권4호
    • /
    • pp.102-108
    • /
    • 2018
  • A glass-texturing technique was developed for photovoltaic (PV) module cover glass; periodic honeycomb textures were formed by using a conventional lithography technique and diluted hydrogen fluoride etching solutions. The etching conditions were optimized for three different types of textured structures. In contrast to a flat glass substrate, the textured glasses were structured with etched average surface angles of $31-57^{\circ}$, and large aspect ratios of 0.17-0.47; by using a finite difference time-domain simulation, we show that these textured surfaces increase the amount of scattered light and reduce reflectance on the glass surface. In addition, the optical transmittance of the textured glass was markedly improved by up to 95% for wavelengths ranging from 400 to 1100 nm. Furthermore, applying the textured structures to the cover glass of the PV module with heterojunction with intrinsic thin-layer crystalline silicon solar cells resulted in improvements in the short-circuit current density and module efficiency from 39 to $40.2mA/cm^2$ and from 21.65% to 22.41%, respectively. Considering these results, the proposed method has the potential to further strengthen the industrial and technical competitiveness of crystalline silicon solar cells.

소형 위성 영상안정화를 위한 능동형 광학 보정장치 설계 (Design of the Active Optical Compensation Movements for Image Stabilization of Small Satellite)

  • 황재혁;양지연;박진호;조정빈;강명수;배재성
    • 한국항공우주학회지
    • /
    • 제43권5호
    • /
    • pp.472-478
    • /
    • 2015
  • 본 논문에서는 소형 위성 카메라의 영상안정화를 위해 진동외란 보상 및 궤도상 광학정렬이 가능한 능동형 광학 보정장치의 설계에 대해 연구하였다. 능동형 광학 보정장치는 초점면부 보정장치와 부경 보정장치로 이루어져 있다. 초점면부 보정장치는 영상센서에 유입되는 진동 외란을 초점면부에서 직접 보상하는 장치이다. 또한 부경 보정장치는 초점면부 보정장치와 협력하여 궤도상에서 능동적으로 광학정렬을 수행할 수 있는 장치이다. 본 논문에서는 해상도 1 m급 소형 위성에 적용 가능한 능동형 광학 보정장치 설계를 위해 소형 고해상도 위성 카메라의 요구도를 분석하고, 진동 외란 보상과 궤도상 광학정렬이 능동적으로 가능하도록 초점면부 보정장치와 부경 보정장치의 요구도를 선정하였다. 선정된 요구도를 기준으로 본 연구에서 설계된 능동형 광학 보정장치는 초점면부에서 진동외란 보상 및 초점조절, 부경에서 틸트 및 디스페이싱 보상이 가능하므로 독립적으로 5축 제어가 가능한 시스템이다.