• Asian Pacific Journal of Cancer Prevention
• /
• 제15권2호
• /
• pp.937-943
• /
• 2014

Polymorphisms in miRNA binding sites have been shown to affect miRNA binding to target genes, resulting in differential mRNA and protein expression and susceptibility to common diseases. Our purpose was to predict SNPs (single nucleotide polymorphisms) within miRNA binding sites of inflammatory genes in relation to gastric cancer. A complete list of SNPs in the 3'UTR regions of all inflammatory genes associated with gastric cancer was obtained from Pubmed. miRNA target prediction databases (MirSNP, Targetscan Human 6.2, PolymiRTS 3.0, miRNASNP 2.0, and Patrocles) were used to predict miRNA target sites. There were 99 SNPs with MAF>0.05 within the miRNA binding sites of 41 genes among 72 inflammation-related genes associated with gastric cancer. NF-${\kappa}B$ and JAK-STAT are the two most important signaling pathways. 47 SNPs of 25 genes with 95 miRNAs were predicted. CCL2 and IL1F5 were found to be the shared target genes of hsa-miRNA-624-3p. Bioinformatic methods could identify a set of SNPs within miRNA binding sites of inflammatory genes, and provide data and direction for subsequent functional verification research.

• BMB Reports
• /
• 제41권5호
• /
• pp.388-393
• /
• 2008

The Pphsc70 (heat shock cognate 70) gene was isolated from the endoparasitoid Pteromalus puparum and then characterized. The full-length cDNA was 2204 base pair (bp) and contained a single 1968 bp ORF that encoded a polypeptide of 656 amino acids with a predicted molecular mass of 71.28 kDa. Phylogenetic analysis based on Hsc70 amino acid sequences from fifteen insect species agreed with the present phylogeny. In addition, genomic DNA confirmed the presence of three introns located at the coding region as well as the 5'UTR. A significant elevation of Pphsc70 expression was observed following heat treatment, however, continued exposure to heat shock or recovery caused the expression of induced mRNA to gradually decline to levels that were significantly lower than those of control pupae (P < 0.05). In addition, a significant increase was observed in the emergence rate of pupae that were preheated at $40^{\circ}C$ and then exposed to $50^{\circ}C$ for 1 h when compared with the pupae that were not preheated, but instead directly exposed to $50^{\circ}C$. Taken together, these results revealed that exposure to gradually increasing temperatures can enhance an insects thermo-tolerance.

• Journal of Microbiology and Biotechnology
• /
• 제19권11호
• /
• pp.1439-1446
• /
• 2009

Isocarbophos is a widely used organophosphorus insecticide that has caused environmental pollution in many areas. However, degradation of isocarbophos by pure cultures has not been extensively studied, and the degradation pathway has not been determined. In this paper, a highly effective isocarbophos-degrading strain, scl-2, was isolated from isocarbophos-polluted soil. The strain scl-2 was preliminarily identified as Arthrobacter sp. based on its morphological, physiological, and biochemical properties, as well as 16S rDNA analysis. The strain scl-2 could utilize isocarbophos as its sole source of carbon and phosphorus for growth. One hundred mg/l isocarbophos could be degraded to a non detectable level in 18 h by scl-2 in cell culture, and isofenphos-methyl, profenofos, and phosmet could also be degraded. During the degradation of isocarbophos, the metabolites isopropyl salicylate, salicylate, and gentisate were detected and identified based on MS/MS analysis and their retention times in HPLC. Transformation of gentisate to pyruvate and fumarate via maleylpyruvate and fumarylpyruvate was detected by assaying for the activities of gentisate 1,2-dioxygenase (GDO) and maleylpyruvate isomerase. Therefore, we have identified the degradation pathway of isocarbophos in Arthrobacter sp. scl-2 for the first time. This study highlights an important potential use of the strain scl-2 for the cleanup of environmental contamination by isocarbophos and presents a mechanism of isocarbophos metabolism.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.428-429
• /
• 2011

Recently, we performed ab initio total energy calculation and tight-binding molecular dynamics (TBMD) simulation to study structures and the reconstruction of native defects in graphene. In the previous study, we predicted by TBMD simulation that a double vacancy in graphene is reconstructed into a 555-777 composed of triple pentagons and triple heptagons [1]. The structural change from pentagon-octagon-pentagon (5-8-5) to 555-777 has been confirmed by recent experiments [2,3] and the detail of the reconstruction process is carefully studied by ab initio calculation. Pentagon-heptagon (5-7) pairs are also found to play an important role in the reconstruction of vacancy in graphene and single wall carbon nanotube [4]. In the TBMD simulation of graphene nanoribbon (GNR), we found the evaporation of carbon atoms from both the zigzag and armchair edges is preceded by the formation of heptagon rings, which serve as a gateway for carbon atoms to escape. In the simulation for a GNR armchair-zigzag-armchair junction, carbon atoms are evaporated row-by-row from the outermost row of the zigzag edge [5], which is in excellent agreement with recent experiments [2, 6]. We also present the recent results on the formation and development of dislocation in graphene. It is found that the coalescence of 5-7 pairs with vacancy defects develops dislocation in graphene and induces the separation of two 5-7 pairs. Our TBMD simulations also show that adatoms are ejected and evaporated from graphene surface due to large strain around 5-7 pairs. It is observed that an adatom wanders on the graphene surface and helps non-hexagonal rings change into stable hexagonal rings before its evaporation.

• Environmental Engineering Research
• /
• 제25권3호
• /
• pp.384-392
• /
• 2020

The presence of high fluoride concentration (> 1.5 mg/L) in water causes serious health problems such as fluorosis, infertility, brain damage, etc., which are endemic to many places in the world. This study has investigated the fluoride removal capacity of the novel activated biochar (BTS) and hydrochar (HTS) using Teff (Eragrostis tef) straw as a precursor. Activated biochar with mesoporous structures and large specific surface area of 627.7 ㎡/g were prepared via pyrolysis process. Low-cost carbonaceous hydrochar were also synthesized by an acid assisted hydrothermal carbonization process. Results obtained from both adsorbents show that the best local maximum fluoride removal was achieved at pH 2, contact time 120 min and agitation speed 200 rpm. The thermodynamic studies proved that the adsorption process was spontaneous and exothermic in nature. Both adsorbents equilibrium data fitted to Langmuir isotherm. However, Freundlich isotherm fitted best for BTS. The maximum fluoride loading capacity of BTS and HTS was found to be 212 and 88.7 mg/g, respectively. The variation could primarily be attributed to a relatively larger Surface area for BTS. Hence, to treat fluoride contaminated water, BTS can be promising as an effective adsorbent.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book II
• /
• pp.1-11
• /
• 2003

Chinese herbs have been used for a long period of time and less side effects than synthesized chemical drugs. Therefore, using Chinese herbs as natural additives in cosmetics becomes popular in recent years. The methanol extracts of Scutellariae Radix, Lithospermi Radix, Lonicerae Flos, Andrographitis. Herba, Angelicae Dahuricae Radix, Ligustici Rhizoma et Radix, Hedyotis Diffusae Herba, Isatidis Folium, Magnoliae Liliflorae Flos, Forsythiae Fructus, Anmarrhenae Rhizoma, Spirodelae Herba, Gardeniae Fructus, Sophorae Flavescentis Radix, Coptidis Rhizoma, Prunellae Spica, Equiseti Hiemalis Herba, Gentianae Radix, Moutan Radicis Cortex, Fraxini Cortex, Lycii Radicis Cortex, Violae Herba, Lophatheri Herba, Matricariae chamomillae Flos, Taraxaci Herba and Scutellariae Barbatae Herba are used to test the efficiency of inhibiting acne pathogens. Twenty-six Chinese herbs are extracted by methanol, and then condensed to dried powder. These extracts are divided into water-soluble part and DMSO soluble part. These two type solutions are tested for the effect on acne pathogens by paper disc diffusion method. The results show that the substances of water soluble part which are Coptidis Rhizoma, Moutan Radicis Cortex, Scutellariae Barbatae Herba have medium to high activity of inhibiting acne pathogents, and the substances of DMSO soluble part which are Coptidis Rhizoma, Ligustici Rhizoma et Radix, Sophorae Flavescentis Radix, Moutan Radicis Cortex, Scutellariae Radix, Scutellariae Barbatae Herba also have medium to high activity of inhibiting acne pathogens. Using Chinese herbs as natural additives in cosmetics is convenience and valuable application in cosmetceutical research and development. Therefore, it is worth that re-investigation and find out the potential of Chinese herbs being use in cosmetics.

• 천문학회지
• /
• 제45권6호
• /
• pp.167-173
• /
• 2012

Inter-granular Bright Points (igBPs) are small-scale objects in the Solar photosphere which can be seen within dark inter-granular lanes. We present a new algorithm to automatically detect and extract igBPs. Laplacian and Morphological Dilation (LMD) technique is employed by the algorithm. It involves three basic processing steps: (1) obtaining candidate "seed" regions by Laplacian; (2) determining the boundary and size of igBPs by morphological dilation; (3) discarding brighter granules by a probability criterion. For validating our algorithm, we used the observed samples of the Dutch Open Telescope (DOT), collected on April 12, 2007. They contain 180 high-resolution images, and each has a $85{\times}68\;arcsec^2$ field of view (FOV). Two important results are obtained: first, the identified rate of igBPs reaches 95% and is higher than previous results; second, the diameter distribution is $220{\pm}25km$, which is fully consistent with previously published data. We conclude that the presented algorithm can detect and extract igBPs automatically and effectively.

• 한국의류학회지
• /
• 제4권1_2호
• /
• pp.49-56
• /
• 1980

Because of the scarcity of data, a study of costume during the Baikje period can be made imaginarily only with historical records as data. According to records, Baikje costume was almost the same as that of the Koguryo period. Consequently, we may well imagine Baikje costume by means of studying such materials as the mural paintings found in Koguryo tombs and the remains found in the royal tomb of Munyung. The basic form of costume of the Baikje period, therefore, might have been like this: Both male and female wore a kind of jacket(유: JEOGORI) and trousers(고: BAJI) with female-wearing skirt (상: CHIMA) thereon. Both men and women wore overcoat(포: DURUMAGI). They used to wear headdress(관모) and used leather shoes(화) Such a form of costume can be found in the costume of HANIWA(식륜) of Japan, which belonged to the costume of HOBOK (호복) of the northern area. Under the SHIMNEUK-PUM-KWAN-KE(십육품관계) system, that is, 16 grades of official ranks, officials of the Baikje dynasty wore clothes, coronets and belts, all of which differed from one another in colors, according to ranks. Such a system of Baikje might have influenced the KANI-JUNI-KAI (the 12-grade color discrimination of the coronet, 관위십이계) for the government officials of ancient Japan the Suiko period. For the study of such matters, I have tried to review the flow of the Korean culture into ancient Japan in the field of costume.

• Industrial Engineering and Management Systems
• /
• 제4권1호
• /
• pp.54-67
• /
• 2005

This paper provides an evaluation of an optimization-based, multiple-input double-output (MIDO) run-to-run (R2R) control scheme for general semiconductor manufacturing processes. The controller in this research, termed adaptive dual response optimizing controller (ADROC), can serve as a process optimizer as well as a recipe regulator between consecutive runs of wafer fabrication. In evaluation, it is assumed that the equipment model could be appropriately described by a pair of second-order polynomial functions in terms of a set of controllable variables. Of practical relevance is to consider a drifting effect in the equipment model since in common semiconductor practice the process tends to drift due to machine aging and tool wearing. We select a typical application of R2R control to chemical mechanical planarization (CMP) in semiconductor manufacturing in this evaluation, and there are five different CMP process scenarios demonstrated, including mean shift, variance increase, and IMA disturbances. For the controller, ADROC, an on-line estimation technique is implemented in a self-tuning (ST) control manner for the adaptation purpose. Subsequently, an ad hoc global optimization algorithm based on the dual response approach, arising from the response surface methodology (RSM) literature, is used to seek the optimum recipe within the acceptability region for the execution of next run. The main components of ADROC are described and its control performance is assessed. It reveals from the evaluation that ADROC can provide excellent control actions for the MIDO R2R situations even though the process exhibits complicated, nonlinear interaction effects between control variables, and the drifting disturbances.

• Archives of Plastic Surgery
• /
• 제48권6호
• /
• pp.660-669
• /
• 2021

Background The demand for aesthetic procedures continues to grow globally, particularly in East Asian countries. The popularity of specific aesthetic procedures varies, however, depending on the particular East Asian geographical region being studied. This study aimed to evaluate the experiences of and attitudes toward aesthetic procedures in five East Asian countries/regions, including China, Japan, South Korea, Hong Kong, and Taiwan. Methods To recruit participants, an online questionnaire was designed and distributed on social media networks between May 2015 and March 2016. The statistical analysis was conducted using SPSS software, version 22.0. Results A total of 3,088 people responded (approximately 600 in each country/region). Of these, 940 participants (47.8%) responded that they had experienced at least one aesthetic procedure in the past. Taiwan had the highest number of participants who had experienced at least one procedure (264/940, 41%), with primarily non-surgical experiences. Only in South Korea did surgical cosmetic experiences exceed non-surgical cosmetic experiences (55.9% vs. 44.1%). The popularity of particular procedures and the motivation for undergoing aesthetic procedures varied by country. Conclusions The popularity of aesthetic procedures continues to evolve. Similar trends were observed across the East Asian regions; however, each country had its unique demands and preferences. The information provided by this study can help aesthetic plastic surgeons further understand the patients in their corresponding region, customize their practice, and develop the requisite skills.