• 한국의학물리학회지:의학물리
• /
• 제1권1호
• /
• pp.109-122
• /
• 1990

전자선 치료에 있어서 조사면을 부분적으로 차폐할 수 있는 차폐체 제작 방법을 제시하였다. Lipowitz 합금으로 만든 차폐체는 표준 Siemens cone에 적합하며, 조사면의 평탄도는 차폐체에 의한 영향을 거의 받지 않았다. 그러나 개방 조사면에 대한 차폐 조사면의 비가 0.7 이상이면 차폐체에 의한 선량의 차이가 있음을 알았다. Biggs 등이 제안한 Cone ratio는 차폐 조사면의 Cone ratio curve가 개방조사면의 Cone ratio를 따르지 않기 때문에 본 연구에서는 Cone ratio를 Cone factor와 Insert ratio로 나누어 차폐 조사면에 대한 선량 변화를 넓게 측정하였다.

• 한국수자원학회논문집
• /
• 제44권10호
• /
• pp.843-851
• /
• 2011

수문학 분야에서 중장기 유출량 예측은 입력변수의 불확실성 등으로 인하여 확률론적 방법을 사용하는 것이 바람직한 것으로 알려져 왔다. 본 연구에서는 금강유역을 대상으로 구성된 바 있는 RRFS-ESP 시스템에 PDF-ratio 방법을 기반으로한 사전처리기능을 장착하여 보다 효율적인 중장기 예측시스템으로의 확장을 시도하여 보았다. 이를 위하여 기상청에서 제공하는 확률기상정보를 이용하여 가중치를 산정하고 이를 기반으로 시나리오별 예측확률을 갱신하였다. 예측결과에 대하여 각 기법별 예측점수를 산정하여 본 결과 우선 ESP 기법에 의한 예측점수의 평균이 초보예측 점수를 상회하여 본 연구에서 구성한 RRFS-ESP 시스템의 적용성을 확인할 수 있었다. 또한 확률기상전망을 이용하여 갱신한 유입량 시나리오의 예측점수가 ESP 기법에 의한 예측점수를 상회하고 있음을 확인할 수 있어 ESP 기법에 의한 예측결과를 확률기상전망을 이용하여 갱신할 경우 예측 정확도를 보다 개선시킬 수 있음을 확인할 수 있었다.

• Journal of Biosystems Engineering
• /
• 제31권4호
• /
• pp.363-368
• /
• 2006

The effects of germinating types and treatments of acetic acid, water-soluble and water-insoluble chitosan on the germination ratio and sprout length of brown rice were investigated in this study. The treatment of 0.001% acetic acid improved the germination ratio and sprout growth of brown rice in the germinating types of a air-exposure method after water-soaking (Type II) and a repetitive method of water-soaking & air-exposure (Type III), not water-soaking method (Type I). The treatment of water-soluble chitosan with higher concentration caused higher germination ratio and faster sprout growth. The treatment of water-insoluble chitosan repressed the germination and the sprout growth of brown rice. The germination ratios of brown rice germinated by the Type III were higher than those by Type I and Type II for all the treatments of acetic acid and water-soluble & water-insoluble chitosan as more than 97% germination ratio. Also, the Type III method accelerated the sprout growth of brown rice compared with Type I and Type II.

• 한국산림과학회지
• /
• 제102권4호
• /
• pp.608-616
• /
• 2013

이 연구에서는 교토의정서 제3조 4항의 산림경영활동에 따른 이산화탄소 흡수량 산정을 위한 산림경영율 추정방법으로 임의선택법, 계층추출법, 최대시업면적법, 중복시업면적법을 제시하였고, 그 중 측정 보고 검증가능한 (MRV) 방식에 있어서 현재 가장 합리적인 방법이라 판단되는 최대시업면적법을 적용하여 사례분석을 실시하였다. 산림경영율은 전체산림면적 대비 산림경영면적으로 정의될 수 있으며, 산림경영면적은 산림경영활동의 정의에 따라 전체 산림을 시업지와 제한지로 구분하였다. 시업지의 산림경영면적은 '국유림경영정보시스템'과 '사유림 경영정보 DB구축 사업'의 시업이력을 근거로, 제한지의 경우는 '산지구분도'상의 공익용 임지를 기준으로 산출되었다. 사례연구 대상지인 충청북도의 산림경영면적은 시업지 115,566 ha, 제한지 131,008 ha로 전체 산림면적 495,806 ha의 49.7%(산림경영율)로 나타났다. 이 연구는 교토의정서체계하에서의 우리나라 산림경영율을 추정할 수 있을 뿐만 아니라 산림경영율을 높일 수 있는 산림경영계획과 실행방안을 찾는데 기여할 것으로 판단된다.

• 상하수도학회지
• /
• 제31권3호
• /
• pp.237-248
• /
• 2017

The estimation method of economical leakage management target utilized upon planning business for improvement of revenue water ratio in South Korea is presented and applicability of methods developed in this study is assessed through application on site. With a consideration of revenue water ratio in application target area, estimation method of long-term economical leakage management target is applied. Three leakage reduction methods such as replacement of residual aged pipe, leakage investigation and restoration and water pressure management are applied with a consideration of characteristics of site. Due to difficulty of obtaining data, analysis of cost/benefit by leakage reduction methods is performed by applying method of leakages estimation equation among statistical methods. As a result of application, revenue water ratio corresponding to long-term economical leakage management target is 91.6 %.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.607-610
• /
• 2004

The Pb $(Zr_{0.52}Ti_{0.48})O_3/(Ba_{0.6}Sr_{0.4}TiO_3$ [PZT(52/48)/BST(60/40)] heterolayered thin films were fabricated on the Pt/Ti/$SiO_2$/Si by RF sputtering method. The structural properties of the PZT(52/48)/BST(60/40) heterolayered thin films were investigated with Ar/$O_2$ ratio condition. All the PZT(52/48)/BST(60/40) heterolayered thin films had shown the PZT(111), (200) and BST(200) Peaks of the tetragonal structure. Increasing the Ar/$O_2$ ratio, the average roughness was increased. The thickness ratio of the to the PZT and BST thin film was 1:2. In the case of the PZT(52/48)/BST(60/40) heterolayered thin films with Ar/$O_2$ ratio of 80/20, the average roughness was 3.4 [nm].

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.966-973
• /
• 2005

The stress concentration ratio in accordance with area replacement ratios were considered as core elements of design. However, the stress concentration ratio will be vary depends on progress of consolidation in clay ground. And, since it is not sure to know the affecting factors accurately, the value is decided based on field experiences. To use SCP method more effective and correspond to soil improvement, the decision on proper area replacement ratio through the exact stress concentration ratio is very important. Accordingly, a numerical analysis on influence of various factors that needed to make rational designing guide for decision of proper area replacement ratio to stress concentration ratio was executed in this study.

• 한국자동차공학회논문집
• /
• 제14권1호
• /
• pp.92-99
• /
• 2006

The swirl ratio of a charge in the cylinder was estimated by calculating the ratio of the rotary speed of charge which could be simulated from the rotary speed of paddle in the swirl measurement apparatus, to the engine speed which could be calculated by measuring intake air flow rate. The automation of the swirl ratio measurement for cylinder head was achieved by controling both valve lift in cylinder head and a suction pressure of surge tank using two step-motors. The number of measurement position for calculating mean swirl ratio was varied by adjusting the interval of valve lift. The mean swirl ratio with varying the number of measurement position showed nearly constant value. Two measurement methods for measuring the swirl ratio were compared, one was to control the suction pressure of the surge tank with PID (proportional, integral, differential) mode with by-pass valve controlled by the step motor and the other did not control the surge tank pressure by fixing the by-pass valve. The difference of the mean swirl ratio between the two measurement methods showed nearly constant value with varying the number of measurement position. This means that the w/o PID control method could be preferred to the PID control method which has been used, due to the simpleness of the swirl measurement.

• 대기
• /
• 제20권4호
• /
• pp.483-494
• /
• 2010

The vertical profiles of the extinction coefficient, the backscatter coefficient, and the lidar ratio (i.e., extinction-to-backscattering ratio) for Asian dust and pollution aerosols are determined from Raman (inelastic) and elastic backscatter signals. The values of lidar ratios during two polluted days is found between 52 and 82 sr (July 22, 2009) and 40~60 sr (July 31, 2009) at 52 nm, with relatively low value of particle depolarization ratio (<5%) and high value of sun photometer-derived Angstrom exponent (> 1.2). However, lidar ratios between 25 and 40 sr are found during two Asian dust periods (October 20, 2009 and March 15, 2010), with 10~20% of particle depolarization ratio and the relatively low value of sun photometer-derived Angstrom exponent (< 0.39). The lidar ratio, particle depolarization ratio and color ratio are useful optical parameter to distinguish non-spherical coarse dust and spherical fine pollution aerosols. The comparison of aerosol extinction profiles determined from inelastic-backscatter signals by the Raman method and from elastic-backscatter signals by using the Fernald method with constant value of lidar ratio (50 sr) have shown that reliable aerosol extinction coefficients cannot be determined from elastic-backscatter signals alone, because the lidar ratio varies with aerosol types. A combined Raman and elastic backscatter lidar system can provide reliable information about the aerosol extinction profile and the aerosol lidar ratio.

• 한국물환경학회지
• /
• 제28권2호
• /
• pp.202-212
• /
• 2012

Due to the deterioration of water supply network and the deficiency of raw water, the water utility of local governments have performed various projects to improve their revenue water ratio. However, it is very difficult to estimate the cost for maintaining the revenue water ratio at higher level after completing the project, because local governments have different conditions affecting the operating and maintenance cost of water supply network. The purpose of this study is to present a procedure to estimate the operating and maintenance cost required to maintain the target revenue water ratio of the water supply network. For this purpose, we estimated the cost used only for operation and maintenance of water supply network of 164 local governments with the aid of K-Mean Clustering Analysis and the data from 40 representative local governments. Then, the regression analysis was performed to find relationship between revenue water ratio and the operating and maintenance cost with two different data sets generated by two classification methods; the first method classifies the local governments by means of k-means clustering, and the other classifies the local governments according to the index standardized by the operating and maintenance cost per unit length of water mains per revenue water ratio. The results shows that the method based on the index standardized by the cost and revenue water ratio of each government produces more reliable results for finding regression equations between revenue water ratio and the operating and maintenance cost only for water supply network. The estimated regression equations for each group can be used to estimate the cost required to keep the target revenue water ratio of the local government.