• Journal of Power Electronics
• /
• 제12권2호
• /
• pp.344-356
• /
• 2012

In recent years, multilevel technology has become an effective and practical solution in the field of moderate and high voltage applications. This paper discusses an APF with a three-level NPC inverter. Obviously, the application of such converter to APFs is hindered by the problem of the voltage unbalance of DC capacitors, which leads to system instability. This paper comprehensively analyzes the theoretical limitations of the neutral-point voltage balancing problem for tracking different harmonic currents utilizing current switching functions from the space vector PWM (SVPWM) point of view. The fluctuation of the neutral point caused by the load currents of certain order harmonic frequency is reported and quantified. Furthermore, this paper presents a close-loop digital control algorithm of the DC voltage for this APF. A PI controller regulates the DC voltage in the outer-loop controller. In the current-loop controller, this paper proposes a simple neutral-point voltage control method. The neutral-point voltage imbalance is restrained by selecting small vectors that will move the neutral-point voltage in the direction opposite the direction of the unbalance. The experiment results illustrate that the performance of the proposed approach is satisfactory.

• 설비공학논문집
• /
• 제29권9호
• /
• pp.482-495
• /
• 2017

Degree-days are practically used as a tool to estimate energy consumption for heating and cooling. Degree-days are calculated by summing differences of balance point temperature and outside temperature for the analyzed period. Determining balance point temperature is a key point in calculating accurate degree-days. However, ASHRAE standards are used for balance point temperature in Korea because balance point temperature considering climate conditions and building thermal performance is not proposed in Korea. This study proposes the process to generate balance point temperature for heating degree-days considering Korean climate and building conditions. Also, a new balance point temperature for three regions in Korea will be suggested in this study. Balance point temperature of Seoul is approximately $15.0^{\circ}C$, lower than the current standard of $18.3^{\circ}C$. Balance point temperature of Seoul considering climate conditions and building performance can be different from the ASHRAE suggested value ($18.3^{\circ}C$). Results revealed the current standard for balance point temperature should be changed considering climate and building conditions in Korea.

• Journal of Acupuncture Research
• /
• 제29권6호
• /
• pp.47-56
• /
• 2012

Objectives : This study was performed to investigate the effect of acupuncture at Yintang point(EX-$HN_3$) on heart rate variability in healthy adults with mental stress. Methods : 38 healthy volunteers(sham point group : 19, Yintang point group 19) participated in this study. The study was established by randomized trial. After 10 minutes rest period, mental stress was provided for 10 minutes. HRV was recorded before and after stress. And then simple acupuncture was applied at sham or Yintang point for 15 minutes. We measured HRV 3 times: before and after stress, and after acupuncture. Results : In sham point group, LF norm and HF norm changed significantly after mental stress. In Yintang point group, LF, HF, LF norm, HF norm and LF/HF showed a significant change after mental stress. In sham point group, all indicators were not affected after acupuncture. In Yintang point group, HF norm decreased significantly. LF, LF norm and LF/HF increased significantly. There were significant differences between two groups(p<0.05). Conclusions : The results suggest that acupuncture at Yintang point(EX-$HN_3$) can regulate and prevent the alteration of autonomic nerve system by mental stress.

• Korean Journal of Acupuncture
• /
• 제29권1호
• /
• pp.23-36
• /
• 2012

Objectives : This study was conducted to investigate effective treatment point selection method using oppressive pain in acupoints as elementary attempt for standard methodology of clinical acupuncture studies. Methods : Twenty seven subjects with hypertension or within prehypertension category - systolic and diastolic blood pressure (BP) over 120/80mmHg - were divided into two groups, oppressive pain point treatment group and oppressive painless point treatment group. In oppressive pain point treatment group, single point acupuncture (SPA) was conducted for 16 sessions during 8 weeks on most oppressive painful point among 6 selected acupuncture points used in previous trials and clinic. As a SPA intervention, 15 minutes with deqi sensation- elevating manipulation was conducted on the treatment acupoint. Same process was conducted in oppressive painless point treatment group on most oppressive painless point with subject blinding. Results : Significant reduction was observed in both systolic and diastolic BP after short time intervention (15.5/8.8 mmHg, 10.7/7.1 mmHg, P<0.05, respectively at 1 week) and maintained for 8 weeks intervention period in all groups (12.8/8.0 mmHg, 19.4/12.6 mmHg, P<0.05, respectively). No significant difference of BP change between oppressive pain point treatment group (N=10) and oppressive painless point treatment group (N=9) was observed during 8 weeks study period. Conclusions : SPA treatment as used in this pilot study was effective for lowering BP in mild hypertensive population, but oppressive pain in acupoint had no effect on treatment. This present result suggests the possibility of SPA for hypertension treatment regardless of oppressive pain.

• 대한한의학회지
• /
• 제15권2호
• /
• pp.241-252
• /
• 1994

It is known that the pattern of combustion temperature can be classified into preheating, heating. retaining and cooling periods. In this experiment. the authors have studied the heating mechanism by the density of moxa material during the heating and retaining periods. The starting point. the point at which it begins to reach the maximum gradient temperature. the ending point of the heating period. and the ending point of the retaining period were measured in order to get effective stmulation by repetition of moxa-combustion. For the experiment. samples of 300mg. 400mg, and 500mg of moxa material were molded into conical molds with each 10mm in diameter and height resulting in the volume of $0.26cm^3$. The following results were obtained: The $300mg/0.26cm^3$ denstiy sample reached al1 points tested faster than the samples of $400mg/0.26cm^3$ and $500mg/0.26cm^3$ It dose not reveal any statistical differences between $400mg/0.26cm^3$ and $500mg/0.26cm^3$ in the ending point. the point at which it begins to reach the maximum gradient temperature of the heating period or the ending point of the reataining period The only difference shown was in the starting point of the heating period. According to the above results. it is concluded that the lower density moxa material reached each point of the the respective period faster than the high density moxa material.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.72-75
• /
• 1988

In the point-to-point motion on servo system, the control mode which minimizes the performance index including, the impact of end point, time and energy, is proposed. The proposed control mode applied to the feed-back control system of D.C motor and then had a computer simulation. This control mode had less the impact of end point, stedy state error, time and energy than the bang-bang or the saturating- proportional control mode.

• Journal of Information Display
• /
• 제10권1호
• /
• pp.37-44
• /
• 2009

AiPi technology incorporates an embedded clock and control scheme with a point-to-point bus topology, thereby having the smallest possible number of interface lines between a timing controller and column drivers. A point-to-point architecture boosts the data rate and reduces the number of interface lines, because impedance matching can be easily achieved. An embedded clock and control scheme is implemented by means of multi-level signalling, which results in a simple clock/data recovery circuitry. A 46" AiPi-based 10-bit FHD prototype requires only 20 interface lines, compared to 38 lines for mini-LVDS. The measured maximum data rate per data pair is more than 800 Mbps.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1058-1060
• /
• 2003

A ground control point (GCP) is a point on the surface of Earth where image coord inates and map coordinates can be identified. The GCP is useful for the geometric correction of systematic and unsystematic errors usually contained in a remotely sensed data. Especially in case of synthetic aperture radar (SAR) data, it has serious geometric distortions caused by inherent side looking geometry. In addition, SAR images are usually severely corrupted by speckle noises so that it is difficult to identify ground control points. We developed a ground point extraction algorithm that has an improved capability. An application of radargrammetry to Daejon area in Korea was studied to acquire the geometric information. For the ground control point extraction algorithm, an ERS SAR data with precise Delft orbit information and rough digital elevation model (DEM) were used. We analyze the accuracy of the results from our algorithm by using digital map and GPS survey data.

• Journal of the Korean Statistical Society
• /
• 제32권4호
• /
• pp.337-357
• /
• 2003

This paper introduces new measures for the stability of slope estimation on the second order response surface at a point and on a sphere. As a measure of point stability of slope estimation, we suggest a point dispersion measure of slope variances over all directions at a point. A spherical dispersion measure is also proposed as a measure of spherical stability of slope estimation on each sphere. Some designs are studied to explore the usefulness of the proposed measures. Using the point dispersion measure, another concept of slope rotatability called equally-stable slope rotatability is proposed as a useful property of response surface designs. We provide a set of conditions for a design to have equally-stable slope rotatability.

• Journal of the Optical Society of Korea
• /
• 제20권5호
• /
• pp.633-640
• /
• 2016

In a dual lens stereoscopic camera, a convergence point determines the stereopsis effects of a video. When a user zooms an object, a convergence point is fixed since it is not coupled with a zoom function. Due to the fixed convergence point, it is possible for a zoom to cause the excessive binocular disparity resulting in visual discomfort. In this paper, to solve this problem, we build the relational model including all phenomena possible to arise and propose the adjustment methods of a convergence point by the positions of a focus, an object and a convergence point. We also evaluate the experiments measuring a binocular disparity and the subjective test to investigate the visual comfort. The results show that one of the proposed methods produced more comfortable 3D images to viewers than the others.