• Restorative Dentistry and Endodontics
• /
• v.31 no.1
• /
• pp.1-10
• /
• 2006

The purpose of this study was to compare the shaping ability of three Ni-Ti file systems used by dental students or the experts and consequently to aid in choosing a proper systems for educational courses of dental students and beginners. Fifty students and ten dentists who have clinical experience over two years prepared 180 simulated root canals in resin blocks with three Ni-Ti systems; $ProFile^{(R)}\;(PF),\;HeroShaper^{(R)}\;(HS),\;K3^{TM}\;(K3)$. After preparation, the Ni-Ti files were evaluated for distortion and canal preparation time was recorded. The images of pre- and post-instrumented canals were scanned and superimposed. Amounts of increased canal widths, deviation, and centering ratio were calculated at apical 1, 3 and 5 mm levels and statistical analysis was performed The results were as follows : 1. HS showed the shortest preparation time and instrumented canal width in K3 was significantly larger than other groups (P<0.05). 2. At 1 and 3mm levels, all groups had outward deviation. In student group, at the 1mm level, PF had the least deviation (P<0.05). 3. In the centering ratio, the PF had the best centering ability compared to the others at 5mm level. At 1 and 3mm levels, HS and PF had better abilities than K3. Student group had better ratio than the expert at 3mm level with PF (P<0.05). Based on the results, it is surmised that the $ProFile^{(R)}$ is the safest and most ideal instrument for students and beginners.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.758-767
• /
• 1995

The purpose of this study was to evaluate canal shaping ability after canal preparation by using engine-driven nickel-titanium file and endosonic file in curved canals. 30 mesiobuccal canals of molars extracted within recent 3 months were divided into 3 groups. Group I and group II were prepared by using engine-driven nickel-titanium Gates-Glidden drill type and the engine-driven nickel-titanium file type. Group III prepared by using en do sonic file. The image of preinstrumented canals was taken by X-ray. The image of postinstrumented canal was taken by X-ray in the same condition of preinstrumentation. A magnified X-ray image on magnifier screen was traced and then compared the preinstrumentated canal image with the postinstrumentated canal image by superimposing method. The following results were obtained : 1. In the change of canal curvature, the engine-driven nickel-titanium Gates-Glidden drill type showed the least change and the ultrasonically filing showed the greatest change. 2. In the percentage of canal enlargement, the engine-driven nickel-titanium file type was greatest at all level(p<0.05), the apex of all group was the greatest, the difference of ultrasonically filing group showed greater between apex and cervix. 3. The percentage of canal enlargement on convex side was greater than that of on concave side in apex of each group(p<0.05). In the ultrasonically filing group, both sides of canal enlargement showed sharply difference(p<0.01). 4. The percentage of canal enlargement on convex side was greater than that of on concave side in the third of cervix of the engine-driven nickel-titanium file type and the ultrasonically filling. The percentage of canal enlargement of convex and concave side in the third of middle of the engine-driven nickel-titanium Gates-Glidden drill type show a similar canal enlargement between convex side and concave side. As above result, the engine-driven nickel-titanium file type was greater in canal enlargement than the other instruments. The engine-driven nickel-titanium Gates-Glidden dirll type was efficient endodontic instrument for curved canal preparation because it was least change in canal curvature.

• Restorative Dentistry and Endodontics
• /
• v.34 no.3
• /
• pp.232-239
• /
• 2009

The aim of this study was to compare the effects of anti curvature filing with stainless steel k-file versus nickel-titanium ProFile in the shaping of mesial root canals of extracted mandibular molars. A total of 60 canals from 30 mesial roots of mandibular molar teeth were randomly assigned to three groups with n=20 each. They were prepared with different instruments and methods: The first group with stainless steel k-file and circumferential filing. the second with precurved stainless steel k-file and anticurvature filing and the third with ProFile C06 taper) and anticurvature filing. Using a micro-computed tomography system (skyscan-1076, SKYSCAN, Antwerpen, Belgium), pre-and post-operative specimens were scanned. Subsequently, canal images were superimposed and changes in root dentin thickness were measured at distal side (danger zone) of the canal. The data was analyzed using a one-way ANOVA and the comparison of means was conducted using a post hoc multiple comparison Tukey test. There were significant differences in the change of root dentin thickness at the $7.5{\sim}8.5\;mm$ level between group 1 and 2, $3.5{\sim}6mm$ level between group 1 and 3 and $3.5{\sim}6mm$ level between group 2 and 3(n=20, P<0.05).

• Journal of information and communication convergence engineering
• /
• v.9 no.5
• /
• pp.567-572
• /
• 2011

As the mobile devices have powerful CPUs and memories, it is possible to carry the large volumes of design drawings, such as DXF files, on mobile devices. However, since the format of a DXF file is the ASCII, it has the shortcoming where the size of a file is larger than a binary formatted file and it is difficult to display the entities of drawings quickly on mobile devices. In this paper, we design the DXF manager system on a smart phone. To speed up the rate of the display and panning, the DXF manager hires the spatial index, the fixed grid file. We also implement the system on the Samsung Omnia-1$^{(R)}$ to exploit the Windows Mobile$^{(R)}$ operating system.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.11a
• /
• pp.133-136
• /
• 2005

EAI(Enterprise Application Integration : 전사적 애플리케이션 통합)는 기업간 또는 기업 내부의 다양하고 이질적인 시스템과 애플리케이션 그리고 비즈니스 프로세서를 통합 하는것[1]이며, 본 논문에서는 기존의 데이타 처리에서 발생하는 문제점인 수신측 장애시 데이터의 손실이 발생하는 것을 방지하기 위한 방법으로 C.M(Certificate Message)방식을 제안하였으며 이를 증명하기 위하여 Ledger File에 Confirm 되지않은 메시지를 보관하여 수신측의 장애 이거나 네트워크 장애에도 Data 손실을 방지하는, Review Ledger File 방식을 적용한 C API 프로그램으로 구현하여 증명함 으로써 수신측 상태가 정상적으로 된 경우에 송신측의 Ledger File 다시 읽어서 재송신하여 그 어떤 장애 상황에도 Data 손실됨을 방지하여 실시간 트랜잭션의 처리에 획기적인 방법을 제시하였고, 기존 EAI 시스템 개발시에 문제점으로 대두된 표준화된 개발 방법이 부재하여 개발 및 유지보수에 많은 비용이 발생한 것에 대하여 본 논문은 표준화 방법을 통하여 해결책을 제시하였고, 또한 Ledger File 및 데이타에 대한 모니터링 방법을 Cobol API 프로그램을 통하여 구현하여 실시간 장애 모니터링 방법을 제시하였다. 마지막으로 결론에서 앞으로의 발전방향에 대하여 논의한다.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2549-2551
• /
• 2003

We propose character recognition system for Gerber files. The Gerber file is the vector-formatted drawing file for PCB manufacturing. To consider the special vector format and rotated characters, we develop segmentation and feature extraction method. The modularized neural network is then applied to the recognition algorithm. Finally, comparative simulation results are presented to verify the usefulness of the proposed method.

• Restorative Dentistry and Endodontics
• /
• v.25 no.4
• /
• pp.494-498
• /
• 2000

이 연구의 목적은 'Three-File' 방식에 의한 근관형성시 근관의 형태변화 및 전이정도를 분석하고 이를 기존의 근관형성방법과 비교하고자 하는 것이다. 만곡된 근관을 가진 투명한 레진블럭 상에서 'Three-File' 방식, crown-down방식 및 스테인레스강 화일에 의한 수동방식으로 근관형성을 시행하고 이를 똑같은 위치가 재현가능한 고정틀에 위치시킨 후 사진의 이중노출 기법을 이용하여 근관형성 전후의 근관의 형태변화 및 전이정도를 분석한 결과 다음과 같은 결과를 얻었다. 1. 스테인레스강 화일의 경우 근관확대가 가장 컸고 근관의 전이정도도 심하였으며, 형성된 근관이 taper하지 못하고 불규칙한 형태를 보였다. 2. Profile로 crown-down방식에 의해 형성한 경우 taper한 근관형태를 보였고, 근관의 전이 정도도 스테인레스강 화일의 경우보다 작았다(p<0.01). 3. Profile로 'Three-File'방식에 의해 형성한 경우 taper한 근관형태를 보였고 근관의 전이정도도 스테인레스강 화일의 경우보다 유의하게 작았으나(p<0.01), crown-down방식에 의해 형성한 경우와 유의할 만한 차이는 없었다(p>0.01).

• The KIPS Transactions:PartA
• /
• v.9A no.2
• /
• pp.163-170
• /
• 2002

Previous buffer cache schemes for continuous media file system only exploited the sequentiality of continuous media accesses and didn't consider looping references. However, in some video applications like foreign language learning, users mark the scene as loop area and then application automatically playbacks the scene several times. In this paper, we propose a novel buffer cache scheme for continuous media file system that sequential and looping references exist together. Proposed scheme increases the cache hit ratio by detecting reference pattern of files and appling an appropriate replacement policy to each file.

• Journal of Internet Computing and Services
• /
• v.20 no.6
• /
• pp.21-28
• /
• 2019

Process mining is state-of-the-art technology in the workflow field. Recently, process mining becomes more important because of the fact that it shows the status of the actual behavior of the workflow model. However, as the process mining get focused and developed, the material of the process mining - workflow event log - also grows fast. Thus, the process mining algorithms cannot operate with some data because it is too large. To solve this problem, there should be a lightweight process mining algorithm, or the event log must be divided and processed partly. In this paper, we suggest a set of operations that control and edit XES based event logs for process mining. They are designed based on relational algebra, which is used in database management systems. We designed three operations for tailoring XES event logs. Select operation is an operation that gets specific attributes and excludes others. Thus, the output file has the same structure and contents of the original file, but each element has only the attributes user selected. Union operation makes two input XES files into one XES file. Two input files must be from the same process. As a result, the contents of the two files are integrated into one file. The final operation is a slice. It divides anXES file into several files by the number of traces. We will show the design methods and details below.

• Restorative Dentistry and Endodontics
• /
• v.31 no.1
• /
• pp.30-35
• /
• 2006

To evaluate the change of working length with various instrumentation techniques in curved canals, working length and canal curvature were determined before and after canal instrumentation in buccal or mesial canals of extracted human molars. Stainless steel K-files ($MANI^{(R)}$, Matsutani Seisakusho Co. Takanezawa, Japan), nickel-titanium K-files (Naviflex $NT^{TM}$, Brassier, Savannah, USA) , $ProFile^{(R)}$, and ProTaper (Dentsply-Maillefer, Ballaigues, Switzerland) were used to prepare the canals with crown-down technique. In two hand instrumentation groups coronal flaring was made with Gates Glidden burs. Apical canals were instrumented until apical diameter had attained a size of 30. Positional relation between the tooth apex and the $\#10$ K-file tip was examined by using AutoCAD 2000 (Autodesk Corp., San Rafael. CA, USA) under a stereomicroscope before and after coronal flaring, and after apical instrumentation. Degree of canal curvature was also measured with Schneider's method in radiographs. Data of working length and canal curvature changes were statistically analyzed with one-way ANOVA and Tukey's studentized range test. Working length and canal curvature were decreased significantly in each step in all instrumentation groups. Coronal flaring using Cates Glidden burs in hand instrument groups and whole canal instrumentation using stainless steel hand K-files caused significantly more working length change than in ProFile instrumentation group (p<0.05). The result of this study demonstrates that all of the above kinds of instrumentation in curved canals cause reduction of working length and canal curvature at each instrumentation steps, and hand instrumentation causes more working length change than ProFile.