• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.461-462
• /
• 2006

This paper reports on the development of a scanning probe microscopy(SPM) tip with caborn nanotubes. We used an electric field which causes dielectrophoresis(DEP), to align and deposit CNTs on a metal-coated SPM tip. Using the CNT attached SPM tip, we have obtained an enhanced resolution and wear property compared to that from the bare silicon tip through the scanning of the surface of the bio materials. The carbon nanotube tip align toward the source of the ion beam allowing their orientation to be changed at precise angles. By this technique, metal coated carbon nanotube tips that are several micrometer in length are prepared for scanning probe microscopy.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.530-537
• /
• 2004

Development of a versatile nanomanipulation tool is an overarching theme in nanotechnology. Such a tool will likely revolutionize the field given that it will enable fabrication and operation of a wealth of interesting nanodevices. This study seeks funding to create a novel nanomanipulation system with the ultimate goal of using this system for nanomanufacturing at the molecular level. The proposed design differs from existing approaches. It is based on a nanoscale ion trap integrated to a scanning prove microscope (SPM) tip. In this design, molecules to be assembled will be ionized and collected in the nanoscale ion trap all in an ultra high vacuum (UHV) environment. Once filled with the molecular ions, the nanoscale ion trap-SPM tip will be moved on a substrate surface using scanning probe microscopy techniques. The molecular ions will be placed at their precise locations on the surface. By virtue of the SPM, the devices that are being nanomanufactured will be imaged in real time as the molecular assembly process is carried out. In the later stages, automation of arrays of these nanomanipulators will be developed.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.2
• /
• pp.345-352
• /
• 2012

Objective: The aim of this study is to evaluate the accuracy and reliability of Spine-Pelvis Monitor(SPM) that was developed to measure 3-dimensional motion of spine and pelvis using tilt sensor and gyro sensor. Background: The main cause of low back pain is very much associated with the task using the low back and pelvis, but no measurement technique can quantify the both spine and pelvis. Method: For testing the SPM, 125 angles from three anatomical planes were measured three times in order to evaluate the accuracy and reliability. The accuracy of SPM in measuring dynamic motion was evaluated using digital motion analysis system. The motion pattern captured by two measuring methods was compared with each other. In result, the percentage error and Cronbach coefficient alpha were calculated to evaluate the accuracy and reliability. Results: The percentage error was 0.35% in flexion-extension on sagittal plane, 0.43% in lateral bending on coronal plane, and 0.40% in twisting on transverse plane. The Cronbach coefficient alpha was 1.00, 0.99 and 0.99 in sagittal, coronal and transvers plane, respectively. Conclusion: The SPM showed less than 1% error for static measurement, and showed reasonably similar pattern with the digital motion system. Application: The results of this study showed that the SPM can be the measuring method of spine pelvis motion that enhances the kinematic analysis of low back dynamics.

• Journal of Chest Surgery
• /
• v.49 no.4
• /
• pp.287-291
• /
• 2016

Background: Spontaneous pneumomediastinum (SPM) is an uncommon disorder with only a few reported clinical studies. The goals of this study were to investigate the clinical manifestations and the natural course of S PM, as w ell as examine the current available treatment options for SPM. Methods: We retrospectively reviewed 91 patients diagnosed with SPM between January 2008 and June 2015. Results: The mean age of the patients was $22.7{\pm}13.2years$, and 67 (73.6%) were male. Chest pain (58, 37.2%) was the predominant symptom. The most frequent precipitating factor before developing SPM was a cough (15.4%), but the majority of patients (51, 56.0%) had no precipitating factors. Chest X-ray was diagnostic in 44 patients (48.4%), and chest computed tomography (CT) showed mediastinal air in all cases. Esophagography (10, 11.0%), esophagoduodenoscopy (1, 1.1%), and bronchoscopy (5, 5.5%) were performed selectively due to clinical suspicion, but no abnormal findings that implicated organ injury were documented. Twelve patients (13.2%) were discharged after a visit to the emergency room, and the others were admitted and received conservative treatment. The mean length of hospital stay was $3.0{\pm}1.6days$. There were no complications related to SPM except for recurrence in 2 patients (2.2%). Conclusion: SPM responds well to conservative treatment and follows a benign natural course. Hospitalization and aggressive treatment can be performed in selective cases.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.19 no.1
• /
• pp.62-66
• /
• 2015

Purpose Various database comparison methods(DCM) are used for analyzing functional neuro-imaging. It is possible to statistically evaluate decreased or increased metabolism of abnormal patient's brain by comparing with asymptomatic controls in DCM. And results of DCM are additionally used for easily explaining defect region. The aim of this study was to evaluate usefulness of statistical parametric mapping(SPM) and scenium. Materials and Methods Data of 15 patients($62.02{\pm}15.03year$) underwent $^{18}F-FDG$ brain PET/CT were collected and analyzed. Biograph TruePoint 40 with TrueV, (Siemens) was used as a PET/CT scanner. Scenium(version 4.0) in Syngo.via(version VA30A) and SPM99 were applied for statistical evaluation. Consistency between PET reading and result of DCM were evaluated by 5 nuclear medicine physicians through a questionnaire survey. SUV and SD changes were evaluated by changing iteration, gaussian filter and matrix size in scenium. And average required time for generating result of SPM99 and scenium was compared by 3 medical technologists. Results Consistency from the result of SPM99 and scenium showed 84% and 92.4% compare to PET reading. When iteration 4, FWHM 8 and matrix size 168, SUV and SD were decreased by 0.59%, 8.73%, 4.69%, 20.38% and 0.88%, 8.25% respectively compare to routine parameter(iteration 8, FWHM 2 and matrix size 336) of scenium. Average required time of SPM99 and Scenium took 282 seconds and 116 seconds to generate result. Conclusion Results of SPM99 and Scenium showed high consistency compare to PET reading. Various parameters can be controled by user when using SPM. However, normal database needs to be acquired. And it takes significant amount of time and effort for the first set up. On the other hand, Scenium provides normal database even though modifiable parameters are limited. Therefore, more informations could be provided for brain PET/CT if properly understanding and selecting each DCM.

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.4
• /
• pp.47-53
• /
• 2001

This study is to investigate the problem of the SPM(Skin Pass Mil7) system which is a finishing treatment of steel sheet. and to develop a PID control scheme to minimize process instability. An electrohydraulic servo system with conventional proportional controller used to regulate the force on the strip works inadequately to yield very undesirable transient responses at the moments welding parts of the strip conte into and pass through the rolls. Both linearized and nonlinear models of a typical SPM system ware simulated first by using Simulink. Then Ziegler-Nichols ultimate cycling method was used for an initial reference guide to tune PID gains, and further fine tuning was performed to get desirable response. The test result in the plant show that proposed PID control scheme successfully improves the process instability in a SPM system.

• Journal of Environmental Health Sciences
• /
• v.20 no.4
• /
• pp.1-9
• /
• 1994

In order to investigate the regional level of air pollutants at Kangwha island situated on the western coast in Korea, the suspended particulate matter samples were collected by using the low volume air sampler on ten interval from March 1992 to February 1993 and the mass concentration of suspended particulate matter (SPM) and the chemical composition of water-soluble major ionic components in SPM samples were measured. During the sampling period, the average concentration of SPM under diameter 10 $\mu$m was found to be 48 $\mu$g/m$^3$ (+ 12). The seasonal concentration of SPM was showed in order of spring>fall>winter>summer. It was considered that higher concentration on spring than other season was affected by the long-range transport of Yellow sand particulate from China continent and lower concentration on summer by the washout and rainout effect of large rainfall. The content of water-soluble component in SPM samples was founded to be about 31% (14.69 $\mu$g/m$^3$) and 65% was unknown or unanalyzed. The content of cationic component showed in order of NH$_4^+$ (44.6%)>Na$^+$ (21.2%)>K$^+$ (14.7%)>Ca$^{2+}$ (13.6%)>Mg$^{2+}$ (5.9 %) and the content of anionic component SO$_4^{2-}$ (62.5%)>NO$_3^-$ (22.3%)>Cl$^-$ (15.2%), respectively. This fact indicates that ammonium and sulfate ion of water-soluble component in SPM sample were dominant in this region. From the chemical composition of water-soluble component, the most of Na$^+$, Mg$^{2+}$ and Cl$^-$ were originated from seawater source but K$^+$, Ca$^{2+}$ and SO$_4^{2-}$ were originated from other non-marine source. The contribution of seasalt to the composition of precipitation was 23%.

• Journal of the Korean Magnetics Society
• /
• v.7 no.2
• /
• pp.69-75
• /
• 1997

The effect of oxide additive system and $Po_2$ condition on the power loss, microstructure, initial permeability, ${\mu}_i$ vs. temperature curve of Mn-Zn ferrites has been investigated. The density and permeability increased with various additive systems while the power loss decreased. It was confirmed that the oxide additives are grain boundary materials and do not change the magnetic properties of Mn-Zn ferrites such as $T_{spm}$ and $T_c$. The ${\mu}_i$ vs. T curve indicated that $T_{spm}$ moved to the higher temperature as $Po_2$ increased. It was also confirmed that the microstructure of Mn-Zn ferrites was independent of the $Po_2$ control during cooling.

• Tuberculosis and Respiratory Diseases
• /
• v.59 no.6
• /
• pp.696-699
• /
• 2005

Spontaneous pneumomediastinum(SPM) is an uncommon disease that is defined as the nontraumatic presence of free air in the mediastinum without any apparent underlying disease. We report a case of recurrent spontaneous pneumomediastinum without any direct precipitating cause. A 21-year-old woman was admitted to hospital suffering from chest pain that occurred during walking (?). She had previously been well. She did not complain of cough or vomiting prior to this presentation. Upon admission, the physical examination and Electrocardiogram findings were normal. The chest x-ray and chest computed-tomography showed a pneumomediastinum. She was successfully managed conservatively. Twenty seven months later, she was readmitted with chest pain, which again occurred during the same activity. The recurrent SPM was confirmed by the chest x-ray and chest computed-tomography. She was managed in the same manner as before and made an uneventful recovery. This is the first case of recurrent SPM in Korea.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.665-666
• /
• 2015

In this paper, it is proposed to substitute the tilting operation device of hybrid multi-D.O.F system from three phase SPM to single phase torque actuator. When using tilting operation with three phase SPM which is appropriate for continuous rotary operation, there are disadvantages that electricity availability rate is low and controllability is difficult. On the other hand when using a single phase torque actuator instead of SPM, it is appropriate for sequential tilting, electricity availability rate is high, and it is easy to control. Thus this will have a great influence on the development and practical use of the system. This study designed a single phase torque actuator in consideration of the magnetic saturation. Also, this was verified with comparative analysis with SPM through FEM(finite element method) analysis values of the design model and test values of the manufactured model.