• Journal of Microbiology and Biotechnology
• /
• v.4 no.4
• /
• pp.316-321
• /
• 1994

We investigated the possibility of industrial application and economit process of high temperature fermentation by thermotolerant alcohol producing yeasts as previously reported. From the 20% glucose media, the RA-74-2 produced 11.8% (v/v) ethanol at $32^{\circ}C$ (0.5% inoculum) and 10.6% (v/v) ethanol at $40^{\circ}C$ (3% inoculum), respectively. Also, 11.3% (v/v) ethanol was produced for 96 hours in the temperature-gradient fermentation. These results suggest that the RA-74-2 could isuccessfully be applied to save the cooling water and energy in industrial scale without re-investment or modification of established fermentation systems. When potato starch was used as the substrate for the RA-74-2, high temperature fermentation above $40^{\circ}C$ was more appropriate for industrial utilization because organic nitrogen was not necessary to economical fermentation. As the naked barley media just prior to industrial inoculation, taken from the Poongkuk alcohol industry Co., were used, 9.6% (v/v) ethanol was produced at $40^{\circ}C$ for 48 hours in jar-fermentor scale (actually, 9.5-9.8% (v/v) ethanol was produced at 30~$32^{\circ}C$ for 100 hours in industrial scale). The ethanol productivity was increased by the high glucoamylase activity as well as the high metabolic ratio at $40^{\circ}C$ Therefore, if the thermotolerant yeast RA-74-2 would be used in industrial scale, we could obtain a high productivity and saving of the cooling water and energy. Meanwhile, the RA-912 produced 6%(v/v) ethanol in 10% glucose media at $45^{\circ}C$ and showed the less ethanol-tolerance compared with industrial strains. As the produced alcohol was recovered by the vacuum evaporator at $45^{\circ}C$ in 15% glucose media, the final fermentation ratio was enhanced (76% of theoretical yields). This suggest that a hyperproductive process could be achieved by a continuous input of the substrate and continuous recovery of the product under vacuum in high cell-density culture.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.12
• /
• pp.1007-1016
• /
• 2006

Although the advance in electronic technology enables a large number of circuity to be packed in a small volume, it is simultaneously required to remove the high heat load produced by them. In this study, the heat transfer and pressure drop characteristics of a mini-channel heat exchanger, which is designed for liquid cooling of electronic components, are investigated by varying operating conditions. Water and FC-72 were used as working fluids. The mini-channel heat exchanger was made with circular shape channels having din-meters of 2, 3, and 4 mm in regular intervals, and the channel length was 100 mm. The header and inlet guide pathway to provide uniform inflow were attached at the inlet of the test section. Copper block including the heaters was attached at the sidewall of the test section as a heat source, which provided the heat flux from 5 to $15W/cm^2$. The entrance effects enhanced the heat transfer coefficient in the mini-channel significantly. In addition, the single-phase pressure drop in the mini-channel was very similar to that predicted by the laminar flow correlation except that the transition Re decreased due to flow instability in the entrance region.

• Advances in pediatric surgery
• /
• v.9 no.1
• /
• pp.1-5
• /
• 2003

Preauricular sinus and preauricular skin tag are common childhood congenital anomalies. It is important for the pediatric surgeon to be familiar with the embryology and differentiation of head and neck structure to accurately diagnose and treat these lesions. Seventy eight patients with preauricular sinus and twenty-eight with preauricular skin tag treated in the Department of Pediatric Surgery at Hanyang University Hospital from January 1981 to May 2002 were reviewed to determine relative frequency, clinical classification and appropriate treatment. The male to female ratio of preauricular sinus was 1:1.2, and preauricular skin tag was 1:1. The most commonly presenting age of sinus and skin tag was before 5 year (62.8%) and before 1 year (53.6%). Twenty nine of 78 cases of preauricular sinuses were on the left, 25 on the right and 24 bilateral. Signs of infection were seen in 73.0% of patients with preauricular sinus at operation. Only 31.3% of lesions were infected in patients less than one year of age, but 89.5% between 3-5 years and 100% between 5-8 years. Cartilage was present in five patients with preauricular skin tag. Although re-operation due to wound infection was necessary in four cases, no recurrences were found. The preauricular sinus is a common anomaly in childhood, and has had a relatively high recurrence rate. But most of the recurrences were due to incomplete resection because of combined infection. Initial proper diagnosis and early operation are very important. Identification of the exact anatomical location of sinus tract is necessary because total excision of the lesions including those tracts is the only way to prevent recurrence.

• Korean Journal of Food Science and Technology
• /
• v.14 no.3
• /
• pp.197-202
• /
• 1982

Kinetic study for the thermal degradation of ginsenosides in ginseng extract was conducted. The results indicate that the thermal degradation followed first order kinetics and rate constants varied substantially depending on the types of ginsenosides and heat treatment temperatures. Activation energy calculated by Arrhenius plots ranged from 16.80 kcal/mole to 30.10 kcal/mole and $Q_{10}$ values ranged from 2.01 to 3.49. Correlation coefficients between the change of ginsenoside contents by thermal degradation and heat treatment temperature were $0.995{\sim}0.999$. The dependence on temperatures of the decomposition rate constant of total ginsenoside can be expressed as $k=4.574{\times}10^8$ exp(8898.8/T).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.12
• /
• pp.1740-1746
• /
• 2016

In this study, we investigated the nutritional and functional constituents as well as quality characteristics and antioxidant activity of Korean cultivated wild ginseng (KG). The chemical compositions and amino acid content of KG were 7.56% water, 73.01% carbohydrates, 12.58% protein, 1.99% lipids, and 5.54% ash as well as 16.17 mg/g of amino acids, respectively. The major ginsenoside and minor ginsenoside contents of KG were 15.94 mg/g and 0.04 mg/g, respectively. The total polyphenol and flavonoid contents of KGE (Korean cultivated wild ginseng with 70% ethanol extract) were 8.93 mg GAE/g and 3.96 mg RHE/g, respectively. KGE also showed higher antioxidant activity than the other extracts (KGW, Korean cultivated wild ginseng with water extract) with regard to DPPH and ABTS radical scavenging activities (57.75% and 70.73%, respectively), nitrite oxide scavenging activity (44.01%), SOD-like activity (78.05%), reducing power activity ($1.08OD_{700nm}$), and ferrous ion-chelating activity (65.33%). Additionally, KGE had higher elastase, collagenase, and tyrosinase inhibition activities than KGW. These results suggest that KGE can be used as a bioactive and functional material in the food industry.

• Journal of Periodontal and Implant Science
• /
• v.25 no.2
• /
• pp.279-289
• /
• 1995

The most important object of periodontal treatment is the perfect regeneration of destructed periodontal tissue. The healing of periodontal lesion is affected by several cells & factors, which result in formation of long juntional epithelium, root resorption, bony ankylosis or connective tissue attachment. And ideal healing is enhanced by epithilial exclusion or periodontal ligament cell activation. In this investigation, I studied the effect of Zizyphus Fructus extract which enhances biologic activity& collagen synthesis, on the chemotaxis & cell nature. The cells were obtained from interdental area & middle third area of the freshly extracted teeth for the orthodontic purpose. And they were fully incubated in${\alpha}-MEM$ solution containing $100{\mu]g/ml$ penicillin & $100{\mu]g/ml$ streptomycin followed by 6 generation incubation. The test cells were collected by trypsin-EDTA & centrifuge in the fully incubated cells, counted by Hernacyotmeter, incbated $5{\times}10^5/ml$ cells for 24 hours, re-incubated 24 hours in media containing natural extract and photographed. The cells were incubated for 4 hours in 48 well microchemotaxis chamber bisecting upper & lower chamber by 8ug/m pore polycarbonate membrane coating 5mg/ml gelatin solution. The migrated cells in microscope were counted, which meaned cell chemotaxis activity. The study had shown that the morphology of cell was spindle-shaped as the control group, and the subextract test groups were not significantly different. In gingival fibroblasts, the chemotaxis effect of PDGF was statistically significant compared to control group. The Zizyphus Fructus extract was more or less enhanced chemotaxis effect and in $1{\mu}g/ml$ concentration the chemotaxis effect was slightly elevated compared with $10{\mu}g/ml$ concentration. But, among the subextracts, it was not significantly defferent. In PDL cells, the chemotaxis effect of PDGF in statistically significant, and the zizyphus Fructus extract had shown the enhanced effect. The effect was slightly higher in $1{\mu}g/ml$ concentration than 10g/ml concentration,and no significance among the subextracts.

• Journal of the Korean Society of Radiology
• /
• v.16 no.3
• /
• pp.217-223
• /
• 2022

In this study, images taken using a grid and images taken using Air Gap Technique were evaluated in X-ray chest radiography. Subjective Evaluation The ROC (Receiver Operating Characteristic) evaluation was evaluated by 5 radiologists who had worked for more than 10 years in the radiology department of a university hospital. Objective evaluation SNR (Signal to noise ratio) was evaluated. As a result of the analysis, the Cronbach Alpha value was 0.714, which was significantly higher. In the Air Gap Technique, the distance between the phantom and the subject was set at 20 cm, and the image was taken with a tube voltage of 100 kVp, a tube current and a recording time of 8 mAs. In the ROC (Receiver Operating Characteristic) evaluation, the highest score was obtained with 18 score and an objective evaluation SNR (signal to noise ratio) of 6,149 scored. Also, in the imaging method using a grid, when the distance between the phantom and the constant receptor is 15 cm apart, and the tube voltage is 110 kVp, the tube current and the recording time are taken at 8 mAs, the ROC evaluation score is 19 and the objective evaluation SNR (Signal to noise ratio) is the highest with 6.622 scored. Therefore, if the Air Gap Technique imaging method is used, which overcomes the shortcomings such as delay in reading, increase in patient's exposure dose, and shortening of mechanical lifespan, as well as re-radiography due to the cut-off phenomenon of the grid that appears using the grid, the It is thought that it will be very helpful for chest imaging, including the case of using a portable X-ray imaging device.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.7
• /
• pp.948-956
• /
• 2000

The effect of high and low level of feed intakes on nutrient digestibility, nutrient losses through methane, energy and protein utilization by goats fed on alfalfa (Medicago sativa L.) pellets based diets was investigated in this study. Twelve castrated Japanese goats were employed in two subsequent digestion and metabolism trials. The goats were divided into three groups, offered three diets. Diet 1 consisted of 100% alfalfa pellet, Diet 2 was 70% alfalfa pellet and 30% corn, and Diet 3 was 40% alfalfa pellet and 60% corn. The two intake levels were high (1.6 times) and low (0.9 times) the maintenance requirement of total digestible nutrients (TON). Rumen ammonia nitrogen ($NH_3$-N) level of Diet 1 was lower (p<0.001) compared to Diets 2 and 3, but the values were always above the critical level (I50 mg/liter), The pH values of rumen liquor ranged from 6.02 to 7.30. Apparent digestibility of nutrient components did not show differences (p>0.05) between the two intake levels but inclusion of corn significantly altered the nutrient digestibility. Diet 3 had highest (p<0.001) dry matter (DM), organic matter (OM), ether extract (EE) and nitrogen fee extract (NFE) digestibility followed by the Diet 2 and Diet 1. The crude protein (CP) digestibility values among the three diets were in a narrow range (70.1 to 70.8%). Crude fiber (CF) digestibility for Diet 3 was slight higher (p>0.05) than that for other two diets. When alfalfa was replaced by corn, there were highly significant (p<0.001) increases in DM, OM, EE and NFE apparent digestibility and a slight increase in the CF digestibility (p>0.05). There were no differences (p>0.05) in energy losses as methane ($CH_4$) and heat production among the diets but energy loss through urine was higher for the Diet 1. The total energy loss as $CH_4$ and heat production were higher for the high intake level but the energy loss as $CH_4$ per gram DM intake were same (0.305 kcal/g) between the high and low intake level. Retained energy (RE) was higher for Diet 3 and Diet 2. Nitrogen (N) losses through feces and urine were higher (p<0.001) for Diet 1. Consequently, N retention was lower (p>0.05) for Diet 1 and higher in Diets 3 and 2. It is concluded that inclusion of corn with alfalfa increased the metabolizable energy (ME) and RE, and retained N through reducing the energy and N losses. The high level of intake reduced the rate of nutrient losses through feces and urine.

• Tuberculosis and Respiratory Diseases
• /
• v.47 no.3
• /
• pp.311-320
• /
• 1999

Background: In recent years, tuberculosis has re-emerged as a major health problem in both industrialized & developing countries. Recent advances in identifying & purifying antigens secreted in active tuberculosis infection have lead to the development of serological assays based on a number of immunodominant antigens. To date, the most sensitive and specific of these antigens has been the 38-kDa antigen. Method: Two rapid membrane-based serologic assays using antigen(38-kDa) from mycobacterium tuberculosis for the diagnosis of tuberculosis were evaluated in 22 patients with smear-positive pulmonary tuberculosis, 14 patients with inactive pulmonary tuberculosis, and 9 patients with non-tuberculous lung disease. Result: The evaluation of validity(sensitivity, specificity, positive predictive value, negative predictive value, false positivity and false negativity) of STAT-PAK ULTRA FAST$^{(R)}$ were 77.3%, 28.6%, 63.0%, 44.4%, 71.4 %, and 22.7% for differential diagnosis of active pulmonary tuberculosis and inactive pulmonary tuberculosis, respectively. The evaluation of validity of STAT-PAK ULTRA FAST$^{(R)}$ were 77.3%, 33.3%, 73.9%, 37.5%, 66.7%, and 22.7% for differential diagnosis of active pulmonary tuberculosis and non-tuberculosis. The evaluation of validity of ICT Tuberculosis$^{(R)}$ were 54.5%, 57%, 66.7%, 44.4%, 42.9%, and 45.5% for differential diagnosis of active pulmonary tuberculosis and inactive pulmonary tuberculosis. The evaluation of validity of ICT Tuberculosis$^{(R)}$ were 54.5%, 100%, 100%, 47.4%, 0%, and 45.4% for differential diagnosis of active pulmonary tuberculosis and non-tuberculosis. Conclusion: We concluded no effectiveness of STAT-PAK ULTRA FAST$^{(R)}$ & ICT tuberculosis$^{(R)}$on serologic diagnosis of pulmonary tuberculosis. In the future, further large-scale study should be needed for serologic diagnosis of pulmonary tuberculosis.

• Macromolecular Research
• /
• v.9 no.4
• /
• pp.197-205
• /
• 2001

Platelet adhesion onto elastic polymeric biomaterials was tested in vitro by perfusing human whole blood at a shear rate of 100 sec$\^$-1/ for possible verification of mechanisms of initial platelet adhesion perfusion of blood on the polymeric substrates was performed after treatments either with or without pre-adsorption of 1% blood plasma, and either with or without residence of the protein-preadsorbed substrate in phosphate buffered solution. The surfaces employed were elastic polymers such as poly(ether urethane urea), poly(ether urethane), silicone urethane copolymer, silicone rubber and poly(ether urethane) with the anti-calcifying agent hydroxyethane bisphosphate. Each polymer surface treated was exposed in vitro to the dynamic, heparinized whole blood perfused for upto 6 min and the surface area of platelets initially adhered was measured by employing in situ epifluorescence video microscopy. The blood perfusion was performed on the surfaces treated at the following three different conditions: directly on the bare surfaces, after protein pre-adsorption and after residence in buffer for 3 days of the surfaces protein pre-adsorbed for 2 h. The effects of blood plasma pre-adsorption on the initial platelet adhesion was surface-dependent. The amount of the adsorbed fibrinogen and the surface coverage area of the adhered platelets were dependent on the surface conditions whether substrates were bare surfaces or protein pre-adsorbed ones. To test an effect of possible morphological (re)orientations of the adsorbed proteins on the initial platelet adhesion, the polymeric substrate pre-adsorbed with 1% blood plasma was immersed in phosphate buffered solution for 3 days and then exposed to physiological blood perfusion. The surface area of the platelets adhered on these surfaces was significantly different from that of the surfaces treated with protein pre-adsorption only. These results indicated that platelet adhesion was dependent on the surface property itself and pre-treatment conditions such as blood perfusion without any pre-adsorption of proteins, and blood perfusion either after protein pre-adsorption or after subsequent substrate residence in buffer of the substrate pre-adsorbed with proteins. Understanding of these results may guide for better designs of blood-contacting materials based on protein behaviors.