• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6B
• /
• pp.355-361
• /
• 2012

Gwangdong Dam Watershed is affected by the increased discharge caused by the melting snow in the spring season. Therefore, simulation results obtained using hydrologic models have generally been inaccurate in relation to discharge without snow pack and melt modules. In this research, a grid based distributed rainfall runoff model (K-DRUM) was developed using a snow pack and melt module, and has been applied in the Gwangdong Dam Watershed to simulate the discharge for a four year period. A previous version of K-DRUM, which does not include a snow pack or melt module, was used to calculate the discharge in order to compare the snow melt effect. The simulation period lasted about 7 months from October of the previous year to April of this year using hourly precipitation and weather observed data. To evaluate the model performance, NSE, PBIAS and RSR statistics techniques were applied using the simulation results of the discharge. From the results of reliability evaluation, the K-DRUM model, which uses a snow pack and melt module, had a good applicability for the runoff simulation considering the snow melt effect in the spring.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.2E
• /
• pp.63-75
• /
• 1996

The squeal vibration of a drum is the major source of brake noise. In this system the binary flutter model of squeal vibration was employed for the drum brake of a passenger car. The vibration analysis of a drum brake was performed by using normal modes, which are obtained by variational method. An improved method for the estimation of shoe modes is proposed and the results are compared with the exact solutions. Numerical results for the coupled system of drum and shoes good agreement with the results of experimental model analysis and those obtained by FE analysis.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.381-386
• /
• 2000

The brake force of drum brakes for commercial vehicles is applied by a s-cam. First of all the influence of the s-cam load angles and elastic modulus of the pad on the contact pressure distribution between pad and drum was checked by using 3 dimensional finite element model. In the second part, temperature and thermal stress analyses were carried out by an axisymmetric model with constant heat flux and pressure-proportional heat flux. In the case of temperature analysis the heat conduction from the interface to the pad and the drum was modeled using a thin soft film element, so artificial division of the generated heat flux between pad and drum is not necessary. The analysis was performed by ABAQUS/Standard code.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.919-923
• /
• 2012

본 연구에서는 K-water에서 자체 개발한 물리적 기반의 격자단위 강우-유출모형(K-DRUM ; K-water Distributed rainfall RUnoff Model)을 일 단위 장기유출 분석에 활용하기 위해서 유역의 증발산량 산정 및 융 적설 등을 모의할 수 있는 기능을 추가로 개발하였고, 재현성 분석을 위하여 남강댐 유역을 대상으로 장기유출모의를 수행하였다. 모의결과 단기 홍수사상의 경우 유출량에서 증발산 효과가 크지 않지만 연간 전체 유출량을 비교할 경우에는 상당한 차이가 발생하는 것을 확인할 수 있었다. 결과적으로 본 연구를 통해 개선된 K-DRUM 모형은 단기 홍수유출 뿐만 아니라 융 적설을 고려한 장기유출 분석에도 활용이 가능할 것으로 판단된다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.2
• /
• pp.71-79
• /
• 2009

In this study, a distributed rainfall-runoff model, K-DRUM, based on physical kinematic wave was developed to simulate temporal and spatial distribution of flood discharge considering grid rainfall and grid based GIS hydrological parameters. The developed model can simulate temporal and spatial distribution of surface flow and sub-surface flow during flood period, and input parameters of ASCII format as pre-process can be extracted using ArcView. Output results of ASCII format as post-process can be created to express distribution of discharge in the watershed using GIS and express discharge as animation using TecPlot. an auto calibration method for initial soil moisture conditions that have an effect on discharge in the physics based K-DRUM was additionally developed. The baseflow for Namgang Dam Watershed was analysed to review the applicability of the developed auto calibration method. The accuracy of discharge analysis for application of the method was evaluated using RMSE and NRMSE. Problems in running time and inaccuracy setting using the existing trial and error method were solved by applying an auto calibration method in setting initial soil moisture conditions of K-DRUM.

• Journal of Satellite, Information and Communications
• /
• v.12 no.3
• /
• pp.22-34
• /
• 2017

The K-DRUM(K-water hydrologic & hydraulic Distributed RUnoff Model), a distributed rainfall-runoff model of K-water, calculates predicted runoff and water surface level of a dam using precipitation data. In order to obtain long-term hydrometeorological information, K-DRUM requires long-term weather forecast. In this study, we built a system providing long-term hydrometeorological information using predicted rainfall ensemble of GloSea5(Global Seasonal Forecast System version 5), which is the seasonal meteorological forecasting system of KMA introduced in 2014. This system produces K-DRUM input data by automatic pre-processing and bias-correcting GloSea5 data, then derives long-term inflow predictions via K-DRUM. Web-based UI was developed for users to monitor the hydrometeorological information such as rainfall, runoff, and water surface level of dams. Through this UI, users can also test various dam management scenarios by adjusting discharge amount for decision-making.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.1
• /
• pp.65-70
• /
• 2010

The effect of austempering treatment on the dynamic properties of a brake drum was investigated to primarily evaluate the potential damping advantage of an AGI (austempered gray iron) drum over a PGI (pearlitic gray iron) drum. This investigation provides valuable information for brake noise reduction since the brake drum is most often the outstanding component that generates the noise of the brake assembly. Test results show that the AGI drum provided slightly larger damping values than the PGI drum for the first few major resonances observed. A finite element model of a drum was also developed to aid in studying its dynamic behavior. A good correlation was obtained between the analytical results and the actual measurement data.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.21-30
• /
• 2010

In this paper, the parallel distributed rainfall runoff model(K-DRUM) using MPI(Message Passing Interface) technique was developed to solve the problem of calculation time as it is one of the demerits of the distributed model for performing physical and complicated numerical calculations for large scale watersheds. The K-DRUM model which is based on GIS can simulate temporal and spatial distribution of surface flow and sub-surface flow during flood period, and input parameters of ASCII format as pre-process can be extracted using ArcView. The comparison studies were performed with various domain divisions in Namgang Dam watershed in case of typoon 'Ewiniar' at 2006. The numerical simulation using the cluster system was performed to check a parallelization effectiveness increasing the domain divisions from 1 to 25. As a result, the computer memory size reduced and the calculation time was decreased with increase of divided domains. And also, the tool was suggested in order to decreasing the discharge error on each domain connections. The result shows that the calculation and communication times in each domain have to repeats three times at each time steps in order to minimization of discharge error.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.472-472
• /
• 2023

In this study, the transport of pollutants was analyzed using the K-River and K-DRUM coupling model for water pollution accidents that occurred in the Nakdong River water system. In Korea, the necessity of a distribution model that accommodates the water circulation process and the importance of nonpoint pollution sources were emphasized in water quality management after the introduction of the total amount of water pollution. Therefore, in order to reflect the runoff characteristics of nonpoint sources, the K-DRUM distribution model, which can analyze pollution in the basin, was used. And the reproducibility of the model was improved by applying the operating rules of dams operating in the Nakdong River system. In addition, in order to analyze the movement of pollutants in the river, only the advection part of the advection-dispersion equation was applied to the 1D hydraulic model K-River to perform pollutant tracking. As a result of water pollution analysis, the peak concentration of the pollutant was underestimated, but the arrival time and the trend of the overall pollutant concentration were well reproduced.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1839-1844
• /
• 2003

In order to provide a tool for designing more efficient methods of mixing fabric, a simplified discrete element computational model was developed for modeling fabric dynamics in a rotating horizontal drum. Because modeling the interactions between actual pieces of fabric is quite complex, a simplified model was developed where individual pieces of bundled fabric are represented by spherical particles. The simulations are used to investigate fabric bundle kinematics, the power required to drive the rotating drum, and the power dissipated through normal and tangential contacts. Parametric studies indicate only fill percentage, drum rotation speed, and friction coefficient play significant roles in the fabric bundle dynamics.