• Journal of Korean Society of Forest Science
• /
• v.79 no.3
• /
• pp.269-277
• /
• 1990

In planning the disaster prevention by the erosion control facilities, it is essential to focus on the microtopography of the channel bed and the chronological process of sedimental movement in the torrential streams. For this purpose, the microtopographical change of the channel bed and the effects of the erosion control facilities in the mountain torrents were analyzed by the experimental channel and the field survey of the torrents where low-dam series had been constructed in the channel. The results of this experiment showed that the effects of construction of the low-dam series on the channel bed fixiation were the prevention of the local scouring in the experimental channel and the expansion of flow channel width and deposit space. The results are summarized as follows : 1. When the low-dam series were constructed over the whole channel bed (L'/L=1), the conning water and the sediment were seperated, simultaneously resulting in deposition of sediment and reduction of the tractive force for the running water. Therefore, the F.A. (Fluctuation area in cross-section: value was decreased to about 65% compared with that of non-work (L'/L=0). 2. The efficiencies of the low-dam series on the channel width were increased with an increment in length of working space. After the construction of low-dam series on the whole channel bed (L'/L=1), flow channel width was increased to about 1.53 times compared with that of non-work (L'/L=0). 3. It needs a deposition area to store the sediment with decrease in tractive force. The low-dam series in the experimental channel widened the deposition area about 2.10 times compared with that of non-work.

• Korean journal of applied entomology
• /
• v.44 no.4 s.141
• /
• pp.325-330
• /
• 2005

This study was conducted to determine the effect of temperatures on the egg and nymphal development, adult longevity and oviposition of bean bug, Riptortus clavatus Thunberg, using Saealkong seed as food sources in fibrous nylon-tube at four different temperatures (20, 24, 28 and $32^{\circ}C$). Hatchability showed the highest value of 100% at $28^{\circ}C$ and decreased with increasing temperature. Egg duration ranged from 7 days at $32^{\circ}$ to 16.7 days at $20^{\circ}C$. Instar duration was longer with increasing instar stage. Nymphal duration was 38 days at $20^{\circ}C$, 30 days at $24^{\circ}C$, 23 days at $28^{\circ}C$, and 18 days at $32^{\circ}C$ Emergence rates to adult were 16, 41, 72 and 68% at 20, 24, 28 and $32^{\circ}C$, respectively. Female adult longelity ranged from a minimum 20 days at $20^{\circ}C$ to a maximum 63 days at $28^{\circ}C$, while the longevity of male ranged from 19 days at $20^{\circ}C$ to 60 days at $28^{\circ}C$. Preoviposition duration was shorter with increasing temperature and ranged from 11 days at $20^{\circ}C$ to 5 days at $32^{\circ}C$. Total number of eggs laid per female ranged from a minimum 21 eggs at $20^{\circ}C$ to a maximum 67 eggs at $28^{\circ}C$. Consequently, the estimated lower threshold tempeatures of each developmental stage were $10.3^{\circ}C$ for egg, and 9.3, 12.7, 10.0, 11.0 and 8.7 for the 1st, 2nd, 3rd, 4th and 5th instar, respectively.

• The korean journal of orthodontics
• /
• v.36 no.6
• /
• pp.412-421
• /
• 2006

Objective: The result of finite element analysis depends on material properties, structural expression, density of element, and boundar or loading conditions. To represent proper elastic behavior, a finite element model was made using Hounsfield unit (HU) values in CT images. Methods: A 13 year 6 month old male was used as the subject. A 3 dimensional visualizing program, Mimics, was used to build a 3D object from the DICOM file which was acquired from the CT images. Model 1 was established by giving 24 material properties according to HU. Model 2 was constructed by the conventional method which provides 2 material properties. Protraction force of 500g was applied at a 45 degree downward angle from Frankfort horizontal (FH) plane. Results: Model 1 showed a more flexible response on the first premolar region which had more forward and downward movement of the maxillary anterior segment. Maxilla was bent on the sagittal plane and frontal plane. Model 2 revealed less movement in all directions. It moved downward on the anterior part and upward on the posterior part, which is clockwise rotation of the maxilla. Conclusion: These results signify that different outcomes of finite element analysis can occur according to the given material properties and it is recommended to use HU values for more accurate results.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.1
• /
• pp.110-117
• /
• 2014

In this study, the biological activity of water and ethanol extracts from Chrysanthemum incidicum Linne by ultrafine grinding for functional food source are examined. The content of phenolic compounds from Chrysanthemum incidicum Linne were the highest when extracted for 6 hr with 70% ethanol. The extraction yield of water and ethanol extracts were $7.12{\pm}1.61$ mg/g and $7.51{\pm}2.14$ mg/g, respectively. With ultrafine grinding, water and ethanol extracts were $8.63{\pm}1.15$ mg/g and $9.33{\pm}1.35$ mg/g, respectively. In determining anti-oxidative activity of Chrysanthemum incidicum Linne extracts, DPPH of normal grinding extracts was 83.52% and ultrafine grinding was 92.37%. In ABTS radical cation decolorization, normal grinding, fine grinding, and ultrafine grinding extracts were 90% or higher. In antioxidant protection factor (PF), water and ethanol extracts of ultrafine grinding showed relatively high anti-oxidative activities of each 1.82 PF and 2.16 PF, respectively. The TBARS value of ultrafine grinding extracts were lower than normal grinding and fine grinding extracts. The inhibition activity on xanthin oxidase of Chrysanthemum incidicum Linne extracts was 67.53% in ultrafine grinded water extracts and 83.45% in ultrafine grinded ethanol extracts. Inhibition on xanthin oxidase of ethanol extracts showed a higher inhibition effect than water extracts, and ultrafine grinding was higher than normal grinding. In angiotensin converting enzyme inhibition activity, ultrafine grinding water extract was 24% or higher, and ethanol extract was 34% or higher. The elastase inhibition activity of ultrafine grinding extract was 25.56%, which was higher than 20.34% of fine grinding extracts. Water extracts did not show hyaluronidase inhibition activity but ethanol extracts showed 35% of hyaluronidase inhibition activity. The determining expression inhibition of iNOS and COX-2 protein in macrophage by Chrysanthemum incidicum Linne extracts with a Western blot analysis, iNOS and COX-2 protein expression inhibition by Chrysanthemum incidicum Linne ethanol extracts were 40% and 15%, respectively at 100 ${\mu}g/mL$ concentration. The inhibitory patterns of iNOS and COX-2 protein expression was concentration dependent. The result suggests that Chrysanthemum incidicum Linne extracts by ultrafine grinding may be more useful than normal grinding as potential sources due to anti-oxidation, angiotensin converting enzyme and xanthine oxidase inhibition, anti-inflammation effect.

• The Korean Journal of Air & Space Law and Policy
• /
• v.1
• /
• pp.193-222
• /
• 1989

The purpose of this study is to review the rights and duties of cargo owners, the party to the contract of international carriage of goods by air under the Warsaw Convention System and the IATA conditions. It is generally known that air freight is the most-cost mode of transportation. However, should there be considerations of total distribution cost, the use of air freight leads exporters to be advantageous in physical distribution. The Warsaw Convention System defined and limited the rights and duties of cargo owners and air carriers paticipating in the international carriage of goods, but it does not regulate every aspect of air transportation. Therefore, the unregulated parts are governed by national laws and by individual contracts of carriage. The International Air Transport Association(lATA), a worldwide organization of airlines, has formulated model conditions of contract for the carriage of cargo. These models are not uniformly followed but they serve as a basis for many of the individual standard form of contracts prepared by air carriers. The contract of air carriage of goods is a contract of adhesion, 'the consignor recognizing and accepting the conditions laid down by the carrier'. There are consignors and carriers as the parties to the contract of international carriage of goods. In addition to his basic right, implied in Warsaw Convention Article 18 and 19, to require devery of the goods in good condition and at the date agreed upon, the consignor has the right to dispose the goods in the course of the journey up to the moment when the consignee is entitled to require delivery. If it is impossible to carry out the orders of the consignor, the carrier must so inform him forthwith. The right conferred on the consignor ceases at the moment when that of the consignee begins in accordance with Warsaw Convention Article 13. Nevertheless, if the consignee declines to accept the air waybill or the goods, or if he cannot be communicated with, the consignor resumes his right of disposition. Unless it is otherwise agreed, it is the duty of the carrier to give notice to the consignee as soon as the goods arrive. The consignee is entitled, on arrival of the goods at the place of destination, to require the carrier to hand over to him the air waybill and to deliver the goods to him, on payment of the charges due and on complying with the conditions of carriage set out in the air waybill. The air waybill is supposed to be made out by the consignor. If the carrier makes it out, he is deemed, subject to proof to the contrary, to have done so on behalf of the consignor, whether there is one air waybill or several, each must be made out in three original parts. The first is for the carrier, the second is for the consignee, and the the third is handed to the consignor when the shipment has been accepted. The consignor is responsible for the correctness of the particulars and statement concerning the cargo appearing in the air waybill. Each of the original parts of the air waybill has evidential value and possession of his part is a condition for the exercise by the consignor or consignee of his rights under the contract of carriage. Hague Protocol set forth in Article 9 that nothing in this. Convention prevents the issue of a negotiable air waybill, but Montreal Additional Protocol No. 4 deleted this article. All charges applicable to a shipment are payable in cash at the time of acceptance thereof by the carrier in case of a prepaid shipment or at the time of delivery thereof by the carrier in case of a collect shipment. The carrier shall have lien the cargo for unpaid charges and, in the event of non-payment thereof, shall have the right to dispose of the cargo at public or private sale and pay itself out of the proceeds of such sale any and all such amounts. In conclusion, the Warsaw Convention System has the character of ambiguity in various respects, not only in the part of the forms of documents but also in conditions of contract. Accordingly, the following propositions might be considered: (1) If the carrier does not obey the orders of the consignor for the disposition of the goods without proper reasons, he will be liable strictly for any damage which may be caused thereby to the cargo owner. The special agreement and carrier's conditions of carriage which limit unreasonably the consignor's right of disposition of the goods will be nullified. (2) The instrument of the Warsaw Convention System which is not yet in force(Montreal Additional Protocol No. 4) would considerably simplfy the processing and keeping of computerized records of the carriage. Until this instrument enters into force, the airlines will be faced with practical problems preventing them to substitute computerized data processing techniques for the formal issuance of the documents. Accordingly, Montreal Additional Protocol No. 4 should become effective as soon as posisble. From a practical point of view in the international trade, the issuance of negotiable air waybill should be permitted for the security of the bank.

• Journal of Korean Society of Forest Science
• /
• v.87 no.4
• /
• pp.519-527
• /
• 1998

An economic study of vegetation control to increase production of Songyi (Korean name far pine mushroom, matsutake, Tracholoma matsutake (S. Ito & Imai) Sing.) in red pine (Panes densiflora) stands in Korea was undertaken. In Korea, Songyi grows only in red pine stands. Harvest of this mushroom provides a significant income source to rural people in Korea yielding exports of US$20 million to US$80 million per year. However, hypogeous Songyi colonies and the mushroom production are declining, partly because shade tolerant species are succeeding the shade intolerant red pine. Past research says that it is possible to deep Songyi production increasing by controlling under-story vegetation. But few people are wilting to invest in the necessary control. Our analysis found that the economics of vegetation control appear to be quite favorable, showing an internal rate of return (IRR) of 20.7 percent in 15 years. However, positive returns do not occur for at least eight years and even then, the returns may not appear to the landowner to be a result of vegetation control efforts only because the mushroom production has been greatly variable depending on weather conditions. In a sensitivity analysis, it was found that the number of circular mushroom colonies was critically important for the cash flow. Results of this analysis are also sensitive to assumptions about annual growth length(0.16m radial growth=1.0m/circular length growth) of Songyi colony. However, the primary goal of vegetation control should be to keep the young colonies growing. Further research in the behavior of hypogeous Songyi colonies after vegetation control would help to improve our confidence in the results.

• Transactions of the Korean hydrogen and new energy society
• /
• v.10 no.2
• /
• pp.119-130
• /
• 1999

After preparing $Mg_2Ni_{1-x}{^{57}}Fe_x$(x=0.015, 0.03, 0.06, 0.12 and 0.24) alloys, they were studied by $M{\ddot{o}}ssbauer$ resonance. The $M{\ddot{o}}ssbauer$ spectra of x=0.015 and 0.03 alloys exhibit two doublets (doublet 1, 2). That of x=0.06 alloys shows two doublets (doublet 1,2) and one six-line, and those of x=0.12 and 0.24 alloys have only one six-line. The doublet 1 for x=0.015, 0.03 and 0.06 alloys is considered to result from a fraction of Fe in excess showing a superparamagnetic behavior. The doublet 2 is considered to result from the Fe substituted for Ni in the $Mg_2Ni$ phase. The values of isomer shift 0.24 ~ 0.28 mm/s suggest that the iron exist in the state $Fe^{+3}$. The result that the quadrapole splitting of the doublet 2 is not zero shows that the distribution of electrons around the iron is asymmetric. Their values for the doublet 2, 1.20 ~ 1.38 mm/s, approach the value of quadrapole for the oxidation number +3. The six-line showing the magnetic hyperfine interactions results from the iron which has not substituted the nickel in the $Mg_2Ni$ phase. The $M{\ddot{o}}ssbauer$ spectra of the hydrided alloys with x=0.015 and 0.03 show six-line. This suggests that the iron segregates with the hydriding reaction. The analysis results of the $M{\ddot{o}}ssbauer$ spectrum, the variation of magnetization with magnetic field, Auger electron spectroscopy and electron diffraction show the segregation of Ni and the formation of MgO. This is considered to result from the reaction of the $Mg_2Ni$ phase with the oxygen contained in the hydrogen as impurity.

• Journal of Intelligence and Information Systems
• /
• v.18 no.3
• /
• pp.35-51
• /
• 2012

Cloud computing is internet-based computing where computing resources are offered over the Internet as scalable and on-demand services. In particular, in case a number of various cloud services emerge in accordance with development of internet and mobile technology, to select and provide services with which service users satisfy is one of the important issues. Most of previous works show the limitation in the degree of user satisfaction because they are based on so called concept similarity in relation to user requirements or are lack of versatility of user preferences. This paper presents cloud service selection reasoning which can be applied to the general cloud service environments including a variety of computing resource services, not limited to web services. In relation to the service environments, there are two kinds of services: atomic service and composite service. An atomic service consists of service attributes which represent the characteristics of service such as functionality, performance, or specification. A composite service can be created by composition of atomic services and other composite services. Therefore, a composite service inherits attributes of component services. On the other hand, the main participants in providing with cloud services are service users, service suppliers, and service operators. Service suppliers can register services autonomously or in accordance with the strategic collaboration with service operators. Service users submit request queries including service name and requirements to the service management system. The service management system consists of a query processor for processing user queries, a registration manager for service registration, and a selection engine for service selection reasoning. In order to enhance the degree of user satisfaction, our reasoning stands on basis of the degree of conformance to user requirements of service attributes in terms of functionality, performance, and specification of service attributes, instead of concept similarity as in ontology-based reasoning. For this we introduce so called a service attribute graph (SAG) which is generated by considering the inclusion relationship among instances of a service attribute from several perspectives like functionality, performance, and specification. Hence, SAG is a directed graph which shows the inclusion relationships among attribute instances. Since the degree of conformance is very close to the inclusion relationship, we can say the acceptability of services depends on the closeness of inclusion relationship among corresponding attribute instances. That is, the high closeness implies the high acceptability because the degree of closeness reflects the degree of conformance among attributes instances. The degree of closeness is proportional to the path length between two vertex in SAG. The shorter path length means more close inclusion relationship than longer path length, which implies the higher degree of conformance. In addition to acceptability, in this paper, other user preferences such as priority for attributes and mandatary options are reflected for the variety of user requirements. Furthermore, to consider various types of attribute like character, number, and boolean also helps to support the variety of user requirements. Finally, according to service value to price cloud services are rated and recommended to users. One of the significances of this paper is the first try to present a graph-based selection reasoning unlike other works, while considering various user preferences in relation with service attributes.

• Korean Journal of Environment and Ecology
• /
• v.20 no.4
• /
• pp.436-447
• /
• 2006

Recently, there is increasing demand on enhancing the efficiency of hydro-seed spraying in afforestation for damaged or degraded land including forest road slopes. In this study, we focus on how seed coating and molding may affect seed germination and seedling growth. Plant species used in the study are Lespedeza cyrtobotrya, Indigofera pseudotinctoria, Arudineila hirta, Poa pratensis, and Lolium perenne. The results of seed germination and seedling growth with and without seed coating and molding are analyzed as follows: 1. For all the species and in both seeding with molding covered with soil and seeding without molding in which seeds were over sown, the increment of germination ratio by seed coating method is greater than by non·coating one. Seed coating increases average germination ratios observed in seeding with molding and without molding by 11.2% and 21.4%, respectively. Germination force may decrease from 0.8 to 3.7 days depending on the plant species and the treatments. The $LD_{50}$ decreased by $0.8{\sim}2.6$ days. However, seed coating delays the start of germination by approximate 1 day for all of the observed plants. 2. Seed coating may have the effect of accelerating the growth of stem and leaf and root. The experimental result shows that seed coating leads to 21.7% and 34.8% increment of average stem and leaf growth by seeding with molding and without molding, respectively. In terms of root growth, seeding with molding results in 22.0% increment while seeding without molding produces 26.2% increased root growth. 3: Compared to seeding without molding, germination starts on an average of 1.3 days later in seeding coated seeds with molding. However. the germination ratio is increased by 5%, and germination force and $LD_{50}$ are observed to shorten by 1.0 day and 1.4 days, respectively. Meanwhile, whether seeds are coated or not may be more related with germination and seedling growth in seeding without molding than with those in seeding with molding. 4. In this study, coating materials are examined to look at which ones are better in each treatment. Coating with Vermiculite+Talcum is the most effective in germination and seedling growth for overall plants. Seed coating using Bentonite, Calcium Carbonate, and Calcium Hydroxide shows better results than non-coating does. 5. When seeds are coated, the greatest enhancement of seed germinations was observed in Indigofera pseudotinctoria and, in the case of seedling growth, Lespedeza cyrtobotrya has the most increasing observation value among the 5 examined species. These results may indicate that woody plant seeds, having greater sizes of seeds than ones of grass seeds, may have greater relation with seed coating than grass plant seeds may have. 6. Therefore, if seeds cannot be molded up after hydro-seeding on forest road slopes, it is recommended that seeds for restoration be pre-coated with Vermiculite+Talcum and then be sowed, in order to quickly stabilize the damaged slope and achieve successful afforestation.

• Sijohaknonchong
• /
• v.42
• /
• pp.29-68
• /
• 2015

This article focused on the development and current status of Sijo-chang, the Korean classical vocal genre, which is the text as a fixed form of Korean classical poems. Historically, Sijo-chang has originally emerged from Hyangga鄕歌 during Silla period (BC. 57- AD. 935). However, the current Sijo-chang has been developed from the latter of Joseon朝鮮 period(AD. 1392-1910) in 1800s. Since 1800s, Sijo-chang derived from the Gyeong-je Pyeong sijo京制 平時調, which was established in Seoul, was able to accelerate its musical types and regional characteristics among the Korean peninsula. By setting a clear division of two time periods between 1800s and those periods since 1900s to today, this article mainly explains how Sijo-chang has been developed historically. First of all, in order to appraise the musical styles and characteristics of Sijo-chang in 1800s, comparing the current musical types of Sijo-chang and those printed old score books which has its historical musical characteristics during 1800s is necessary. Secondly, this paper concentrated on the transmitted lineages of representative vocalists among the regional-based Sijo-chang from 1900s to today. During those periods, the Sijo-chang has formed its particular regional-based musical characteristics among the Korean peninsula such as Yeong-je嶺制 of Gyeongsang province慶尙道, Naepo-je內浦制 of Chungcheong province忠淸道 and Wan-je完制 of Cheolla province全羅道. Although it was not a type of regional-based Sijo-chang, as a creation with reference based on certain regional types of Sijo-chang in 1960s, this paper introduced the inheritance process of Seogam-je石菴制 which was made by Jung Gyeong-tae鄭坰兌 named Seogam石菴 as his pen name. Since Seogam-je has been singing as the most influential musical types of Sijo-chang through the mainly southern region of Korean peninsula and even in Seoul, it was highly significant to research it. In addition, this paper elaborately highlighted the developments of various Sijo-chang based on its historical performances, studies, and the composed pieces from the early 1900s or the mid-1900s. In conclusion, in order to set a vigorous development of Sijo-chang, this paper raised several concerns among the future of Sijo-Chang and the significance of its traditional value.