• 제목/요약/키워드: K Band

검색결과 10,570건 처리시간 0.05초

현실요법에 기초한 미술치료 프로그램이 대학생의 체중조절과 신체상 및 자아존중감에 미치는 효과 (The Effect of an Art Therapy Program based on Reality Therapy on Weight Control, Body Image, and Self-esteem of College Students)

  • 김원경;박정희
    • 한국학교보건학회지
    • /
    • 제14권2호
    • /
    • pp.249-268
    • /
    • 2001
  • This study was carried out to identify the effects of an art therapy program based on reality therapy on the weight control, body image, and self-esteem of college students. The program was developed by the authors. The design was a pretest-post test control group design. The subjects were college students attending M college : 8 in experimental group A, 6 in experimental group 2, who wanted to control their body weight and 16 in the control group who didn't attend the program those in the experimental group attended the program once (group A) or twice (group B) per week meeting a total of six times. The data were analyzed by quantity method (SPSS 10.0 program) and quality method(process analysis). The results were as follows : 1. The average obesity index of pre-test, post-test, and a follow-up test decreased from 8.9% to 6.1%, 3.7%. And the rate of decrease both pre-post and post-follow up were statistically significant 2. The average obesity index of group A decreased from 9.6% to 6.3%, 4.1% and the rate of decrease between pre and post were statistically significant. But the rate of decrease between post and follow-up were statistically not significant 3. The average obesity index of group B decreased from 7.8% to 5.8%, 3.1% and the rate of decrease between pre and post were not significant statistically. But the rate of decrease between post and follow-up were statistically significant 4. The average scores of pre and post body image increased and were statistically significant : group A from 129.0 to 153.5, group B from 127.7 to 155.2. 5. The average scores of pre and post semantic differential method increased and were statistically significant: group A from 38.1 to 44.1, group B from 38.0 to 45.0. 6. The average scores of pre and post self-esteem increased: group A increased from 37.3 to 40.3 and were statistically significant, group B increased from 36.5 to 39.5 but was statistically insignificant 7. The average scores of pre and post obesity rate, body image, semantic differential method and self-esteem in the control group were not statistically significant 8. The pre and post scores of body image(p=.001), semantic differential method(p=.001) and self-esteem(p=.039) between experimental and control group were statistically significant. 9. In Duncan multiple comparison, it was not statistically significant between group A and B, but statistically significant between group A and the control group, group B and the control group in obesity index, body image, semantic differential method. There was no statistically significance among the three groups in self esteem 10. In Duncan multiple comparison, group A gained higher scores than group B in obesity index(-1.2%), and self esteem(0. 3). Group B gained higher scores than group A in body image(3. 0), and semantic differential method(1. 0). So it is difficult to conclude whether group A or B is more effective. In conclusion, the art therapy program based on reality therapy was effective in weight the control program of college students: obesity was decreased, the scores of body image and semantic differential method and self-esteem were increased. The scores of group A were increased more than group Band were statistically significant, The time interval was a very important factor in this program. The recommendation is : the validity of this program has to be tested through various subjects and in various areas. And also this program has to be tested in other topics.

  • PDF

배추재배용 비가림하우스 개발 (Development of Rain Shelter for Chinese Cabbage Rainproof Cultivation)

  • 유인호;이응호;조명환;류희룡;문두경
    • 생물환경조절학회지
    • /
    • 제23권4호
    • /
    • pp.293-302
    • /
    • 2014
  • 본 연구에서는 배추 재배에 적합한 규격과 생육 환경을 조성해 줄 수 있는 비가림하우스를 개발하고자 하였다. 전국 53개 배추 비가림재배 농가를 대상으로 비가림하우스 구조실태 및 구조개선 희망사항을 조사하여 비가림하우스 폭과 높이를 설정하였다. 비가림하우스 규격은 농기계 작업의 용이성, 농가의 의견 등을 고려하여 폭 6m, 처마높이 1.6m, 지붕높이 3.2m로 결정하였다. 서까래 규격별 구조안전성과 설치비를 분석한 후 설치비가 가장 적게 드는 Ø$25.4{\times}1.5t$ 파이프를 서까래로 하고 그 간격이 90cm인 모델을 기본 규격으로 결정하였다. 이 규격은 풍속 $27m{\cdot}s^{-1}$, 적설 17cm에 안전하기 때문에 이보다 기상하중이 큰 지역에는 적용하기가 곤란한데, 이를 해소하기 위해 피복재를 용마루까지 열어 골조 피해를 예방할 수 있는 구조로 설계하였다. 비가림하우스 양 측면에 있는 수동개폐기를 돌려 하우스밴드를 느슨하게 풀어주고 제어반에서 열림버튼을 누르면 개폐모터가 가이드 파이프를 따라 올라가면서 피복재가 용마루까지 개방된다. 피복재를 완전 개방할 경우 해충으로 인한 피해가 우려되므로 농가에서는 이를 막기 위해 방충망을 설치할 수 있다. 배추를 재배하는 기간에 태풍이 지나갈 수 있기 때문에 방충망이 구조안전에 미치는 영향을 분석하였다. $40m{\cdot}s^{-1}$의 바람이 방충망으로 덮여있는 비가림하우스 측면에 수직으로 작용하는 조건에 대해 유동-구조 연성해석 기법을 이용하여 구조안전성을 분석하였다. 유동해석 결과, 피복재 부분은 바람의 영향을 그대로 받기 때문에 피복재 표면에 압력이 크게 작용하였다. 방충망 부분에도 풍하중이 작용하였으나 피복재 부분보다는 압력이 작게 작용하고 분포가 균일하였다. 유동해석에서 도출된 압력 데이터를 적용하여 구조해석한 결과, 최대응력은 파이프의 끝단 즉, 지면부분에서 나타났으며, 그 값은 54.6Mpa이었다. 구조안전 판단 기준인 파이프의 허용응력 215MPa 이내여서 구조적으로 안전한 것으로 판단되었다.

국내, 외 광우병의 발생 현황과 대응 방안 (The current status and control measures of BSE in the worldwide)

  • 유한상
    • 한국환경농학회:학술대회논문집
    • /
    • 한국환경농학회 2009년도 정기총회 및 국제심포지엄
    • /
    • pp.273-282
    • /
    • 2009
  • The transmissible spongiform encephalopathies (TSEs) disease group are fatal neurodegenerative disorders affecting a wide range of hosts. The group includes kuru and Creutzfeldt-Jakob disease (CJD) in humans, scrapie in sheep and goats and Bovine spongiform encephalopathy (BSE) in cattle. The exact nature of the infectious agent involved in the transmission of these diseases remains controversial. However, a central event in their pathogenesis is the accumulation in infected tissues of an abnormal form of a host-encoded protein, the prion protein (PrP). Whereas the normal cellular protein is fully sensitive to protease ($PrP^{sen}$), the disease-associated prion protein ($PrP^d$) is only partly degraded ($PrP^{res}$), its amino-terminal end being removed. BSE was first reported in the mid-80s in the UK. Ten years later, a new form of human prion disease, variant CJD (vCJD) developed in the wake of the BSE epidemic, and there is now strong scientific evidence that vCJD was initiated by the exposure of humans to BSE-infected tissues, thus indicating a zoonotic disease. However, the ban on the feeding of animal-derived proteins to ruminants, and the apparent lack of vertical transmission of BSE, have led to a decline in the incidence of the disease within cattle herd and therefore, an assumed decreased risk for human contacting vCJD. The origin of the original case(s) of BSE still remains an enigma even though three hypotheses have been raised. Hypotheses are i) sheep- or goat-derived scrapie-infected tissues included in meat and bone meal fed to cattle, ii) a previously undetected sporadic or genetic bovine TSE contaminating cattle feed or iii) originating from a human TSE through animal feed contaminated with human remains. A host cellular membrane protein ($PrP^C$), which is abundant in central nervous system tissue, appear to be conformationally altered in the diseased host into a prion protein ($PrP^{Sc}$). This $PrP^{Sc}$ is detergent insoluble and partially protease-resistant ($PrP^{res}$). The term $PrP^{res}$ is normally used to describe the protein detected after protease treatment, in techniques such as Western immunoblotting, and enzyme-linked immunosorbant assay using fresh/frozen tissue. Immunohistochemistry may performed with formalin-fixed tissues. Also, clinical signs of the BSE are one of the major diagnostic indicators. Recently, atypical forms (known as H- and L-type) of BSE have appeared in several European countries, Japan, Canada and the United States. An unusual case was also reported in a miniature zebu. The atypical BSE fall into two groups based on the relative molecular mass (Mm) of the unglycosylated $PrP^{res}$ band relative to that of classical BSE, one of the higher Mm (H-type) and the other lower (L-type). Both types have been detected worldwide as rare cases in older animals, at a low prevalence consistent with the possibility of sporadic forms of prion diseases in cattle. This raises the unwelcome possibility that vCJD could increase in the human population. Now, active surveillance program against BSE is going on in Korea. In regional veterinary service lab, ELISA is applied to screen the BSE in slaughter and confirmatory tests by Western immunoblotting and immunohistochemisty are carried out if there are positive or suspect in the screening test. Also, the ruminant feed ban is rigorously enforced. Removal of specified risk materials such as brain and spinal cord from cattle is mandatory process at slaughter to prevent the infected material from entering the human food chain.

  • PDF

효율적인 SHM을 위한 압축센싱 기술 - Kobe 지진파형을 이용한 CAFB의 최적화 및 지진응답실험 중심으로 (Compression Sensing Technique for Efficient Structural Health Monitoring - Focusing on Optimization of CAFB and Shaking Table Test Using Kobe Seismic Waveforms)

  • 허광희;이진옥;서상구;정유승;전준용
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제24권2호
    • /
    • pp.23-32
    • /
    • 2020
  • 압축센싱 기술인 CAFB는 대상 구조물의 원시신호를 목적된 주파수 범위의 신호로 압축하여 획득하도록 개발되었다[27]. 이때 압축센싱을 위해 CAFB는 대상 구조물의 목적된 주파수 범위에 따라 다양한 기준신호로 최적화 될 수 있다. 또한, 최적화된 CAFB는 지진과 같은 돌발/위험상황에서도 대상 구조물의 유효한 구조응답을 효율적으로 압축할 수 있어야 한다. 본 논문에서는 상대적으로 유연한 구조물의 효율적인 구조 건전도 모니터링을 위하여 목적된 주파수 범위를 10Hz 미만으로 설정하고, 이를 위한 CAFB의 최적화 방법과 지진상황에서 CAFB의 지진응답성능을실험적으로 평가하였다. 이를 위해 본 논문에서는, 먼저 Kobe 지진파형을 이용하여 CAFB를 최적화하였고, 이를 자체 개발한 무선 IDAQ 시스템에 임베디드 하였다. 그리고, Kobe 지진파형을 이용하여 2경간 교량에 대한 지진응답실험을 수행하였다. 마지막으로 CAFB가 내장된 IDAQ 시스템을 이용하여 실시간으로 2경간 교량의 지진응답을 무선으로 획득하고, 획득된 압축신호는 원시신호와 상호 비교하였다. 실험의 결과로부터 압축신호는 원시신호와 대비하여 우수한 응답성능과 데이터 압축효과를 보였고, 또한 CAFB는 지진상황에서도 구조물의 유효한 구조응답을 효과적으로 압축센싱할 수 있었다. 최종적으로 본 논문에서는 목적된 주파수 범위(10Hz 미만)에 적합하도록 CAFB의 최적화 방법을 제시하였고, CAFB는 지진상황의 계측-모니터링을 위해 경제적이고 효율적인 데이터 압축센싱 기술임을 증명하였다.

침엽수(針葉樹) 우량교잡종(優良交雜種)의 특성(特性)에 관(關)한 연구(硏究) (Studies on the Principal Characteristics of Superior Hybrid Pine)

  • 안건용
    • 한국산림과학회지
    • /
    • 제29권1호
    • /
    • pp.102-114
    • /
    • 1976
  • 소나무속(屬) Diploxylon아속(亞屬)의 종간잡종(種間雜種)인 일대잡종(一代雜種) ${\times}$ P. rigitaeda와 여교잡종(戾交雜種)인 ${\times}$ P. rigida rigitaeda와 ${\times}$ P. rigitaeda rigida, ${\times}$ P. rigitaeda의 $F_2$ 및 자연잡종(自然雜種)인 ${\times}$ P. rigitaeda Wind등(等)의 임성종자확득율(稔性種子穫得率)을 기준(基準)으로 한 교배친화력(交配親和力)과 분류학상(分類學上)의 유연관계(類緣關係)를 검토(檢討)하는 동시(同時)에 조림지(造林地)에 있어서의 생장비교(生長比較), 침엽(針葉)의 해부형태비교(解剖形態比較), phenol성(性) 물질(物質)에 의(依)한 특성비교(特性比較) 및 isoperoxidase의 변이비교등(變異比較等)을 구명(究明)하여 금후계획적조림(今後計劃的造林)에 공헌(貢獻)할 잡종채종림조성(雜種採種林造成) 여부(與否)와 우량잡종간(優良雜種間) 및 기량친종간(其兩親種間)의 차이점(差異點)을 분별(分別) 관찰(觀察)한 결과(結果) 다음과 같은 성적(成績)을 얻었다. 1. 각공시수종(各供試樹種)을 Shaw, Pilger 및 Duffield등(等)의 분류식(分類式)에 준(準)하여 각조합별(各組合別) 임성종자확득율(稔性種子穫得率)을 기준(基準)으로 교배친화력(交配親和力)과 유연관계(類緣關係)를 검토(檢討)한바 각조합(各組合)의 양친종간(兩親種間)에는 상당(相當)한 교배친화력(交配親和力)이 있었고, 근연간(近緣間)임을 알 수 있었으며, 각조합별(各組合別) 최고임성종자확득율(最高稔性種子穫得率)은 67~87%이었다. 2. 각조림지(各造林地)에서의 수고(樹高) 및 근시경(根元徑) 생장비교(生長比較)에서 수종간(樹種間)에 1~5% 수준(水準)으로 고도(高度)의 유의성(有意性)이 있었으므로 재적비(材積比)에서도 P. rigida 보다 28~80%의 보다 월등(越等)한 생장(生長)을 보여 조림상(造林上) 유용성(有用性) 가치(價値)가 있는 우수잡종(優秀雜種)으로 기대(期待)되며, ${\times}$ P. rigitaeda를 제외(除外)한 잡종송(雜種松)은 내한성(耐寒性)에 있어서 P. rigida의 형질(形質)을 받어 전연(全然) 동해(凍害)를 받지 않았으므로 내한력(耐寒力)이 강(强)함을 알 수 있었다. 3. 침엽(針葉)의 해부형태(解剖形態)에 있어서 제형질중(諸形質中) 일부(一部) 예외(例外)도 있었으나 각잡종송(各雜種松)은 대부분(大部分)이 hypoderm에서 biform이었고, resin canal에서는 중위(中位)를 나타냈으며, fibrovascular bundle에서는 대부분(大部分)이 양친종(兩親種)의 중간형질(中問形質)을 나타냈으므로 각잡종(各雜種)과 그 양친종간(兩親種間)의 식별(識別)은 어느정도(程度) 가능(可能)함을 보았다. 4. Phenol성물질(性物賢)에 의(依)한 특성비교(特性比較)에서 각공시잡종(各供試雜種)이 P. rigida와 공(共)히 Rf値 0.66인 phenol물질(物質) 7번(番)이 담황색(淡黃色)으로 반응(反應)되었으나 P. taeda에는 반응(反應)이 나타나지 않았으므로 양친종간(兩親種間)에는 현저(願著)한 식별(識別)을 할 수 있었다. 5. 과산화(過酸化) 동위효소형(同位酵素型)의 변이(變異)는 각공시수종(各供試樹種)에 출현(出現)된 band의 수(數)와 위치(位置) 및 활성도(活性度)의 차이(差異)가 상이(相異)하므로 어느정도(程度) 식별(識別)이 가능(可能)함을 알 수 있었다.

  • PDF

Stellite bearings for liquid Zn-/Al-Systems with advanced chemical and physical properties by Mechanical Alloying and Standard-PM-Route

  • Zoz, H.;Benz, H.U.;Huettebraeucker, K.;Furken, L.;Ren, H.;Reichardt, R.
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2000년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
    • /
    • pp.9-10
    • /
    • 2000
  • An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

  • PDF

웨이블릿 영역에서의 선택적 부분 영상 암호화 (Selectively Partial Encryption of Images in Wavelet Domain)

  • 서영호;;김동욱
    • 한국통신학회논문지
    • /
    • 제28권6C호
    • /
    • pp.648-658
    • /
    • 2003
  • 영상/비디오 컨텐츠의 사용이 급증함에 따라 유료 및 비밀유지를 필요로 하는 영상데이터에 대한 보안문제가 크게 대두되고 있다. 본 논문에서는 영상데이터를 숨기기 위한 영상 암호화 방식을 제안하였다. 이 방법은 웨이블릿 영역에서 양자화과정을 마친 영상 데이터를 대상으로 한다. 본 논문은 영상의 전체데이터가 아닌 부분데이터를 암호화하는 방식을 사용하는데, 세 가지 형태의 부분데이터 추출방식을 사용하였다. 먼저, 웨이블릿 변환이 원영상을 주파수 대역으로 재편성함을 이용하여 영상정보 중 특정 주파수를 숨김으로서 전체 영상을 인식할 수 없도록 하였다. 각 화소를 나타내는 데이터에서도 모든 데이터를 사용하지 않고 MSB만을 선택하여 암호화 대상에 포함시켰다. 마지막으로 특정 부대역의 화소들을 무작위로 선택하였으며, 이 때 선형귀환 시프트 레지스터(Linear Feedback Shift Register, LFSR)를 사용하였다. LFSR의 초기값과 출력비트의 선택에 있어서 암호화키의 일부분을 사용함으로써 암호화 강도를 더욱 높였다. 제안한 방법을 소프트웨어로 구현하여 약 500개의 영상을 대상으로 실험한 결과 원영상 데이터의 약 1/1000의 데이터 양을 암호화함으로써 원영상을 인식할 수 없을 정도의 암호화효과를 얻을 수 있음을 알 수 있었다. 따라서 제안한 방법은 작은 양의 암호화로 효과적으로 영상을 숨기는 방법임을 확인할 수 있었다. 본 논문에서는 부대역의 선택과 LFSR 출력 중 사용비트의 양에 따른 여러 방식을 제안하였으며, 이들의 암호화 수행시간과 암호화효과 사이에 상보적인 관계가 있음을 보여, 적용분야에 따라 선택적으로 사용할 수 있음을 보였다. 또한 본 논문의 방식들은 응용계층에서 수행되는 것으로, 현재 유·무선 통합 네트워크의 중요한 문제로 대두되고 있는 끝과 끝 (end-to-end)의 보안에 대한 좋은 해결방법으로 사용될 수 있으리라 기대된다.

InSb 적외선 소자제작을 위한 $SiO_2$, $Si_3N_4$증착 온도에 따른 계면 특성 연구

  • 김수진;박세훈;이재열;석철균;박진섭;윤의준
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제40회 동계학술대회 초록집
    • /
    • pp.57-58
    • /
    • 2011
  • III-V족 화합물 반도체의 일종인 InSb는 77 K에서 0.23 eV의 작은 밴드 갭을 가지며 높은 전하 이동도를 가지고 있기 때문에 대기권에서 전자파 흡수가 일어나지 않는 3~5 ${\mu}m$범위의 장파장 적외선 감지가 가능하여 중적외선 감지 소자로 이용되고 있다. 하지만 InSb는 밴드 갭이 매우 작기 때문에, 소자 제작시 누설전류에 의한 소자 특성의 저하가 문제시 되고 있다. 또한 다른 화합물 반도체에 비해 녹는점이 낮고, 휘발성이 강한 5족 원소인 Sb의 승화로 기판의 화학양론적 조성비(stoichiometry)가 변하기 쉬워, 계면특성 저하의 원인이 된다. 따라서 우수한 특성을 가지는 적외선 소자의 구현을 위해서, 저온에서 계면 특성이 우수한 고품질의 절연막 증착 연구가 필수적이다. 본 연구에서는 InSb 기판 위에 $SiO_2$, $Si_3N_4$의 절연막 형성시 증착온도의 변화에 따른 계면 트랩 밀도를 분석하였다. $SiO_2$, $Si_3N_4$ 절연막은 플라즈마 화학 기상 증착법(PECVD)을 이용하여 n형 InSb 기판 위에 증착하였으며, 증착온도를 $120^{\circ}C$부터 $240^{\circ}C$까지 변화시켰다. Metal oxide semiconductor(MOS) 구조 제작을 통하여, 커패시턴스-전압(C-V)분석을 진행하였으며, 절연막과 InSb 사이의 계면 트랩 밀도를 Terman method를 이용하여 계산하였다[1]. 또한, $SiO_2$$Si_3N_4$의 XPS 분석과 TOF-SIMS 분석을 통하여 계면 트랩 밀도의 원인을 밝혀 보았다. $120{\sim}240^{\circ}C$ 온도 범위에서 계면 트랩 밀도는 $Si_3N_4$의 경우 $2.4{\sim}4.9{\times}10^{12}cm^{-2}eV^{-1}$, $SiO_2$의 경우 $7.1{\sim}7.3{\times}10^{11}cm^{-2}eV^{-1}$ 값을 나타냈고, 두 절연막 모두 증착 온도가 증가할수록 계면 트랩 밀도가 증가하는 경향을 보였다. 그러나 모든 샘플에서 $Si_3N_4$의 경우, flat band voltage가 음의 전압으로 이동한 반면, $SiO_2$의 경우, 양의 전압으로 이동하는 것을 확인할 수 있었다. 계면 트랩 밀도 증가의 원인을 확인하기 위해서, oxide를 $120^{\circ}C$, $240^{\circ}C$에서 증착시킨 샘플을 XPS 분석을 통하여 깊이에 따른 성분분석을 하였고, 그 결과, $240^{\circ}C$에서 증착된 샘플에서 계면에서 $In_2O_3$$Sb_2O_3$ 피크의 증가를 확인하였다. 이는 계면에서 oxide양이 증가함을 의미하며, 이렇게 생성된 oxide는 계면 트랩으로 작용하므로, 계면 특성을 저하시키는 원인으로 작용함을 알 수 있었다. Nitride 절연막을 증착시킨 샘플은 TOF-SIMS 분석을 통해, 계면에서의 성분 분석을 하였고, 그 결과, $240^{\circ}C$에서 증착된 샘플에서 In-N, Sb-N, Si-N 결합의 감소를 확인하였다. 이렇게 분해된 결합들의 dangling 결합이 늘어 계면 트랩으로 작용하므로, 계면 특성을 저하시키는 원인으로 작용함을 알 수 있었다. 최종적으로, 소자특성을 확인 하기 위하여 계면 트랩 밀도가 가장 낮게 측정된 $200^{\circ}C$ 조건에서 $SiO_2$ 절연막을 증착하여 InSb 적외선 소자를 제작하였다. 전류-전압(I-V) 분석 결과 -0.1 V에서 16 nA의 누설 전류 값을 보였으며, $2.6{\times}10^3{\Omega}cm^2$의 RoA(zero bias resistance area)를 얻을 수 있었다. 절연막 증착조건의 최적화를 통하여, InSb 적외선 소자의 특성이 개선됨을 확인할 수 있었다.

  • PDF

종교화에 나타난 천사의 복식에 관한 연구 (A Study on Angels' Costumes in Religious Paintings)

  • 김혜전
    • 한국의류학회지
    • /
    • 제3권1호
    • /
    • pp.1-11
    • /
    • 1979
  • This is a study on angels' costumes in religious paintings, especially as this relates to the questions of concepts and theological symbolism. Angels, as spiritual creatures in Christian thought, play the role of praising God's glory, as messengers of God, the role of guarding Israel and the Church, and protecting or punishing human beings. Sometimes the angels appear in incarnate form. They display no sexual differences and are not able to procreate. The angels' funtional classification being thus; nevertheless, they are pictured in various costumes and appearances according to characteristics of the paintings. The angel Michael appears as a man of dignity when pictured as a guard; the angel Gabriel in the annunciation is often portrayed as a woman of mystical beauty. Under the Renaissance, the mighty cherubim and seraphim at Yahweh's throne are degraded as plump child-angels, or winged child-heads looking alike Eros or Cupid. They have become playful and all too obviously non-heavenly chrubs, accepted features of the Temple decorations. However, cherubim are often depicted as naked or wrapped around with a piece of cloth and accompanied with wind, which symbolizes the Glory of God. The angels, costumes without seam are hung over or wrapped around the body, and when sewn they are simple and ample enough that they fall in a great many folds. However, by the 14C. angels are mostly dressed in costumes common to all Europe, and after that angels gradually appear in folk costumes; for example Italian, Flemish, etc. Dalmatic, the typical costume of Byzantine often shows up as angels' dresses even after the period. Originally the dalmatic was the Roman tunic to which Eastern influences added. The Roman clavus on the tunic had gradually lost distinction until, by the Imperial epoch, it was worn by the lowest servants. It was proudly therefore, as 'The servants of God', that the early Christians are shown wearing the clavus on their wide, ungirdled, sleeved dalmatics. In addition to their costume, angels have some other distinct charateristics. First, angels have a halo around their head; this symbolizes their holiness. Second, angels wear a narrow diadem or a queen's crown that seems to denote their glorious status close to God's throne. Third, the cloth band across the breast resembles a priest's stole, which suggests the sacred role of a priest and symbolizes the grace santified. Fourth, lilies in the annunciations are symbols of Mary's virginity. chastity, innocence and heavenly bliss. Angels hold palms or olives in their hands. The former denote prosperity. beauty and the Christians' reward after death; the latter represent peace and amity. the imperial crown made of olives means victory. Fifth, angels in paintings always have a pair of wings, which can be traced to scripture where cherubim and seraphim are described as having pairs of wings. Angels' wings often have colors of the rainbow, and the rainbow is compared to God's glory. Sixth, generally artists paint angels' costumes as white, blue, green, gold and purple. Other colors such as red rarely appear. According, to scriptures it is believed that angels should be depicted 'as white as snow'. According to the biblical expressions of angels as lightning, sun or a pillar of fire, angels should be described as creatures of light. Nevertheless being a form of art, religious paintings may differ in their presentation according to an artist's inspiration and intention. Since religious paintings illustrated above were almost all done before the Reformation, symbols of colors used in the Catholic Church will also be mentioned. The white color symbolizes chastity, purity, brightness, delight and divinity. Green represents new birth, eternal life, spiritual revival and the expectance of the grace of God. Blue, the color of sapphires, denotes chastity and truth. Red, the color of rubies, represents divinity, love and religious passion. Violet is the color of dignity, indicating the sovereign, royal or imperial power and the great Sacrifice of Christ. As mentionad above, angels' costumes were expressed in accordance with contemporary patterns or as indicated in the Bible, and accesories and colors correspond with Christian symbols. Therefore these facts should be taken into consideration when it comes to the study of costume history.

  • PDF

유용임목(有用林木)의 동위효소(同位酵素)에 관(關)한 조림(造林) 및 유전학적(遺傳學的) 연구(硏究) - ×Pinus taeda·rigida와 P. densiflora에 있어서 Leucine Aminopeptidase와 Peroxidase 동위효소(同位酵素)의 유전(遺傳) - (Silvicultural and Genetic Studies on Isozyme Patterns in Forest Trees - Inheritance of Leucine Aminopeptidase and Peroxidase Isozymes in ×Pinus taeda·rigida and P. densiflora -)

  • 박용구;손원하
    • 한국산림과학회지
    • /
    • 제43권1호
    • /
    • pp.39-50
    • /
    • 1979
  • 테다${\times}$리기다 잡종차대(雜種次代)에 대(對)해 LAP와 Peroxidase의 유전양식(遺傳樣式)을 분석(分析)하였으며 소나무 수형목간(秀型木間) 11개(個) 인공교배조합(人工交配組合)에 의(依)해 조성(造成)된 차대(次代)의 LAP동위효소(同位酵素)의 유전양식(遺傳樣式)에 대(對)해 분석(分析)하였다. 테다${\times}$리기다 잡종(雜種)에서 2개(個)의 유전자좌(遺傳子座)(LAP-A, LAP-B)를 추정(推定), 이들은 각각(各各)(A1, A2, A3)와 (B1, B2)의 대립유전자(對立遺傳子)에 의(依)해 지배(支配)받고 있으며 소나무에서도 LAP-A, LAP-B 두개의 유전자좌(遺傳子座)를 추정(推定)하여 모수간(母樹間)에 변이(變異)가 있는 LAP-B는 B1과 B2의 2개 대립유전자(對立遺傳子)에 의(依)해 지배(支配)받고 있음을 밝혀냈다. 테다${\times}$리기다 잡종(雜種)의 Peroxidase에 대(對)해서는 3가지 유전자좌(遺傳子座)(Px-A, Px-B, Px-C)를 추정(推定)하여 모수간(母樹間) 변이(變異)를 나타낸 Px-A 유전자좌(遺傳子座)는 A1과 A2의 두개 대립유전자(對立遺傳子)에 의(依)하여 지배(支配)받고 있음을 밝혀냈다. 이상(以上)의 LAP와 Peroxidase동위효소(同位酵素)는 단량체(單量體)로써 단순(單純)한 멘델유전(遺傳)을 하는 것으로 나타났다.

  • PDF