• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.3
• /
• pp.319-325
• /
• 1984

This experiment aims to observe the nutritive value of blood sausages by manufacturing three kinds of them in order to utilize various by-products of swine when it is processed. In attempt to do so, five different diets were made: one control diet and four diets in which three kinds of blood sausages(blood sausage-1 was made with sausage meat 10%, fat 40%, blood 20%, skin 20% and liver 2%. blood sausage-2 was made with ham meat 30%, fat 20%, blood 20%, liver 2% and skin 20%. blood sausage-3 was made with smoked ham patch 30%, fat 20%, blood 20%, liver 2% and skin 20%) and mixed sausage(sausage meat 20%, fat 10% and fish meat 35%) were mixed with control diet at the rates of 10% respectively. These diets were fed to growing male and female albino rats for 6 weeks. The results obtained through this study are summarized as follows. In body weight gain of male rats, blood sausage-1 and 2 groups were significantly higher than mixed sausage group during the experimental period, and in that of female rats, control group and blood sausage-1 group were similar, but the other groups were lower than control group. Food intake was different in each group every week, but the amount of that was similar to each one throughout all experimental period. Food efficiency ratio and protein efficiency ratio in male were similar in each group, but slightly different in female during the feeding period. Liver weights of male in mixed sausage group and blood sausage-3 group were lower than those in control group and blood sausage-2 group, but liver weight of female in blood sausage-2 group was lower than that in control group. And all groups were similar in liver weight per 100 g of body weight. Mixed sausage group and blood sausage-1 group were lower than control group in kidney weight of male, and blood sausage-1 group was lower than control group in kidney weight of female. Kidney weight per 100 g of body weight of male showed that blood sausage-1 group was lower than the other groups. Spleen weight was similar in all groups. Hematocrit and hemoglobin contents in blood, total protein, albumin, albumin/globulin ratio, total lipid and total cholesterol contents in serum were showed almost similar in all groups.

• Journal of Intelligence and Information Systems
• /
• v.22 no.4
• /
• pp.123-138
• /
• 2016

This study investigates intents of acquisitions in information technology industries. Mergers and acquisitions are a strategic decision at corporate-level and have been an important tool for a firm to grow. Plenty of firms in information technology industries have acquired startups to increase production efficiency, expand customer base, or improve quality over the last decades. For example, Google has made about 200 acquisitions since 2001, Cisco has acquired about 210 firms since 1993, Oracle has made about 125 acquisitions since 1994, and Microsoft has acquired about 200 firms since 1987. Although there have been many existing papers that theoretically study intents or motivations of acquisitions, there are limited papers that empirically investigate them mainly because it is challenging to measure and quantify intents of M&As. This study examines the intent of acquisitions by measuring specific intents for M&A transactions. Using our measures of acquisition intents, we compare the intents by four acquisition types: (1) the acquisition where a hardware firm acquires a hardware firm, (2) the acquisition where a hardware firm acquires a software/IT service firm, (3) the acquisition where a software/IT service firm acquires a hardware firm, and (4) the acquisition where a software /IT service firm acquires a software/IT service firm. We presume that there are difference in reasons why a hardware firm acquires another hardware firm, why a hardware firm acquires a software firm, why a software/IT service firm acquires a hardware firm, and why a software/IT service firm acquires another software/IT service firm. Using data of the M&As in US IT industries, we identified major intents of the M&As. The acquisition intents are identified based on the press release of M&A announcements and measured with four categories. First, an acquirer may have intents of cost saving in operations by sharing common resources between the acquirer and the target. The cost saving can accrue from economies of scope and scale. Second, an acquirer may have intents of product enhancement/development. Knowledge and skills transferred from the target may enable the acquirer to enhance the product quality or to expand product lines. Third, an acquirer may have intents of gain additional customer base to expand the market, to penetrate the market, or to enter a foreign market. Fourth, a firm may acquire a target with intents of expanding customer channels. By complementing existing channel to the customer, the firm can increase its revenue. Our results show that acquirers have had intents of cost saving more in acquisitions between hardware companies than in acquisitions between software companies. Hardware firms are more likely to acquire with intents of product enhancement or development than software firms. Overall, the intent of product enhancement/development is the most frequent intent in all of the four acquisition types, and the intent of customer base expansion is the second. We also analyze our data with the classification of production-side intents and customer-side intents, which is based on activities of the value chain of a firm. Intents of cost saving operations and those of product enhancement/development can be viewed as production-side intents and intents of customer base expansion and those of expanding customer channels can be viewed as customer-side intents. Our analysis shows that the ratio between the number of customer-side intents and that of production-side intents is higher in acquisitions where a software firm is an acquirer than in the acquisitions where a hardware firm is an acquirer. This study can contribute to IS literature. First, this study provides insights in understanding M&As in IT industries by answering for question of why an IT firm intends to another IT firm. Second, this study also provides distribution of acquisition intents for acquisition types.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.3 no.1
• /
• pp.1-28
• /
• 2008

In this research, an empirical analysis was performed to determine the correlation between management performance and Empirical Research on the R&D investment for domestic venture businesses in each industry. Specifically, an empirical analysis for each industry was attempted not only to clarify the general hypothesis on the relationship between management performance and R&D investment for venture businesses but also to demonstrate that differences exist for each industry. Empirical analysis was conducted for eight industries with respect to the $2002{\sim}2006$ panel data extracted as investigative results from the "Investigation Report on Science and Technology R&D Activities" published by the Ministry of Science and Technology. Industrial classification was limited to the middle-level classification (2-digit) in the Korea Standard Industry Code (KSIC) owing to the limited number of panels. Although this research only verified the overall positive effect of R&D activities and funds for existing research on corporate value or productivity and management performance, it was able to document the difference for each individual industry and each business size unlike existing research. Furthermore, the reliability of the research results was enhanced by targeting companies that have been continuously conducting R&D and management activities using consistent 5-year panel data in the analysis. Again, this was something that existing research did not have. Finally, through the use of recent data from 2002 after the IMF economic crisis up to 2006 in the empirical analysis, this research proposed the problems due to the prevailing circumstances at the time of entering the advanced nation stage based on an empirical analysis; the prevailing problems during the pursuit of advanced nation status before the IMF crisis broke out were not tackled. The key empirical analysis yielded several results. First, capital and size of the labor force have a positive correlation with the management performance for the entire company or the venture business. This applies to all eight industries as the subjects of the analysis. Second, although the number of years since a company has been established can have positive or negative correlation with management performance for the entire company or venture business in specific industries, a definite overall trend cannot be identified. Third, R&D investment can be said to have an overall positive effect on corporate management performance. Fourth, the size of the research staff cannot be said to be a factor unilaterally affecting the management performance of the entire company or the venture business. Fifth, the number of years a research institute has been in operation, which was assumed to have a positive effect on the management performance of a company because of the accumulated R&D know-how -- definitely acts as a positive factor contributing to the management performance of a company.

• Management & Information Systems Review
• /
• v.31 no.4
• /
• pp.167-195
• /
• 2012

This study focuses on the characteristic of socio-psychological gender of a consumer except a biological gender. Socio-psychological gender is the self-image of a consumer which is related to the gender role. The goal of this study is, first, to examine if socio-psychological gender has more effect on the purchase intention than biological gender. Second, by classifying a group with femininity among socio-psychological gender, it is to examine what kinds of shopping value it aims at. Finally, it is to examine the difference between men and women from the purchase intention according to the circumstances. The result of this study is summarized as follows. First, a consumer can have both characteristics of biological gender and socio-psychological gender. There are masculinity, femininity, bisexuality, and undifferentiated type for the classification of socio-psychological gender. This study shows that there is relatively much bisexuality which has masculinity and femininity at the same time. The outcome showed that the purchase intention was higher for the product which corresponds to socio-psychological gender of a consumer than biological gender. Second, it indicated that a group with femininity pursued pleasurable shopping as compared to a group with masculinity. By contrast, it showed that a group with masculinity aimed at practical shopping more greatly. Finally, it showed that while women are less sensitive to the purchase intention at the male-dominated circumstances, men's purchase intention get lower at the female-dominated circumstances.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2003.04a
• /
• pp.61-62
• /
• 2003

Clonal propagation of high-value forest trees through somatic embryogenesis (SE) has the potential to rapidly capture the benefits of breeding or genetic engineering programs and to improve raw material uniformity and quality. A major barrier to the commercialization of this technology is the low quality of the resulting embryos. Several factors limit commercialization of SE for Corsican pine, including low initiation rates, low culture survival, culture decline causing low or no embryo production, and inability of somatic embryos to fully mature, resulting in low germination and reduced vigour of somatic seedlings. The objective was to develop a Corsican pine maturation medium that would produce cotyledonary embryos capable of germination. Treatments were arranged in a completely randomized design. Data were analyzed by analysis of variance, and significant differences between treatments determined by multiple range test at P=0.05. Corsican pine (Pinus nigra var. maritima) cultures were initiated on modified !P6 medium. Modifications of the same media were used for culture multiplication and maintenance. Embryogenic cultures were maintained on the same medium semi solidified with 2.5 g/l Gelrite. A maturation medium, capable of promoting the development of Corsican pine somatic embryos that can germinate, is a combination of iP6 modified salts, 2% maltose, 13% polyethylene glycol (PEG), 5 mg!l abscisic acid (ABA), and 2.5 g/l Gelrite. After initiation and once enough tissue developed they were grown in liquid medium. Embryogenic cell suspensions were established by adding 0.951.05 g of 10- to 14-day-old semisolid-grown embryogenic tissue to 9 ml of liquid maintenance media in a 250ml Erlenmeyer flask. Cultures were then incubated in the dark at 2022$^{\circ}$C and rotated at 120 rpm. After 2.53 months on maturation medium, somatic embryos were selected that exhibited normal embryo shape. Ten embryos were placed horizontally on 20 ml of either germination medium ($\frac{2}{1}$strength Murashige and Skoog (1962) salts with 2.5 g/l activated charcoal) or same medium with copper sulphate adjusted to 0.25 mg/1 to compensate for copper adsorption by activated carbon. 2% and 4% maltose was substituted by 7.5% and 13% PEG respectively to improve the yield of the embryos. Substitution of' maltose with PEG was clearly beneficial to embryo development. When 2% of the maltose was replaced with 7.5% PEG, many embryos developed to large bullet-shaped embryos. At latter stages of development most embryos callused and stopped development. A few short, barrel-shaped cotyledonary embryos formed that were covered by callus on the sides and base. When 4% of the maltose was removed and substituted with 13% PEG, the embryos developed further, emerging from the callus and increasing yield slightly. Microscopic examination of the cultures showed differing morphologies, varying from mostly single cells or clumps to well-formed somatic embryos that resembled early zygotic embryos only liquid cultures with organized early-stag. A procedure for converting and acclimating germinants to growth in soil and greenhouse conditions is also tested. Seedling conversion and growth were highly related to the quality of the germinant at the time of planting. Germinants with larger shoots, longer, straighter hypocotyls and longer roots performed best. When mature zygotic embryos germinate the root emerges, before or coincident with the shoot. In contrast, somatic embryos germinate in reverse sequence, with the cotyledons greening first, then shoot emergence and then, much later, if at all, the appearance of the root. Somatic seedlings, produced from the maturation medium, showed 100% survival when planted in a field setting. Somatic seedlings showed normal yearly growth relative to standard seedlings from natural seed.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.21 no.3
• /
• pp.115-122
• /
• 2001

The purpose of this study was to suggest the possibility of utilizing the wildflower pasture as the livestock herbage sources as well as promoting the public interests. Not only dry matter (DM) yield and soil properties of pastures were observed, but also chemical composition of herbages was analyzed. The experimental design includes four treatments: Conventional pasture(COP, forage 6 species), Bottomgrass pasture(BOP, turf grass 6 species), Native wildflower pasture(NWP, turf grass 6 species + native wildflower 11 species) and Introduced wildflower pasture(IWP, turf grass 6 species + introduced wildflower 9 species). The field trials were carried out on the experimental pasture plots at Chungnam National University throughout from 1997 to 2000. The results obtained are as follows : 1. As wildflower pasture was composed of turf grasses and wildflowers, the yearly mean of DM yield in the wildflower pastures (NWP 6,688kg/ha and IWP 7,240kg/ha) was lower than that of COP(8,592kg/ha) or BOP(7,264kg/ha)(p<0.05). This result indicated that the forage productivity of wildflower pasture for livestock is low. 2. The nutritive quality of herbages from wildflower pasture tended to be slightly low compared to that of COP and BOP. On the other hand, compared with IWP, the content of CP, NDF and lignin of herbages from NWP were lower than those from IWP, while IVDMD was higher(p<0.05). 3. The pH and the content of exchangeable Ca in NWP and IWP soils were tended to be low compared to those of COP in changes of soil properties after 3-years experimental trials, while the contents of organic matter, nitrogen, available phosphate, Mg and K were slightly improved. In conclusion, even though DM yield seem to be lower in wildflower pasture than those of COP, and the nutritive quality of herbages from wildflower pasture tended to be slightly low compared to that of COP and BOP. but, possibility of utilizing herbages from wildflower pasture for livestock was to some extent expected. In addition. compared to COP, wildflower pastures improved the property of soil. Thus, although wildflower pasture was not enough for livestock as a herbage, wildflower pasture has enough possibility for promoting the public interest.

• Journal of Korean Society of Forest Science
• /
• v.99 no.4
• /
• pp.559-567
• /
• 2010

This study was conducted to investigate the hydrological characteristics of groundwater level change and rainfall hydrological runoff processes caused by tunnel construction at Milbot bog located in Mt. Cheonseong. Data were collected from July 2004 to May 2008. The results were summarized as follows: The occurrence time of the direct runoff caused by unit rainfall at the Milbot bog were tended to be slower than those at general mountainous basin. Also, runoff did not sensitively respond to amount of rainfall at the most of the long and short term hydrograph. The annual runoff rates from 2004 to 2008 were 0.26, 0.13, 0.16, 0.25 and 0.27, respectively, slightly increased after 2005 regardless of the tunnel construction. Thus, the function of Milbot bog will be weakened, and it supposed to be changed to land in the future because of increasing annual runoff. The annual runoff rate for 4 years was 0.19, which is greatly lower than that of general mountainous basin. The recession coefficient of the direct runoff in short term hydrograph was ranged to 0.89~0.97, which is much larger than that of the general mountainous basin, 0.2~0.8. The recession coefficient of base flow ranged from 0.93 to 0.99, which are similar to general mountainous watershed's values. Groundwater level of Milbot bog increased or decreased in proportion to rainfall intensity, and in the descending time after the groundwater level was reached at peak point, it tends to be decreased very slowly. Also, groundwater level increased or decreased maintaining relatively high value after precedent rainfall. Groundwater level was highest during summer with heavy rainfall, but was lowest during winter. Average groundwater levels decreased annually from 2004 to 2008, -8.48 cm, -14.60 cm, -20.46 cm, -20.11 cm, -28.59 cm, respectively. Therefore, it seems that the Milbot bog is becoming dry and losing its function as a bog.

• Korean Journal of Environmental Agriculture
• /
• v.6 no.2
• /
• pp.53-65
• /
• 1987

The study was performed to investigate the effect of gaseous emissions of sulfur dioxide and hydrogen fluoride on the growth of rice plants under stressed field conditions consisting of 88 industrial plants operating with 285 smoke stacks emitting pollutants. As for the relationship between yields and yield components it is believed that the panicles per hill is the single most important component affecting the rate of yield of the rice plant. Based on the standard partial regression coefficient analysis, panicles per hill has the largest contribution to yield and the average contribution of 54%. Other components such as spikelets per panicle, percent fertility and 1000 grain weight are also contributing factors to yield, although far less so. Fluorine content in the leaf appear to have more negative effect on panicles per hill, percent fertility and subsequent overall yield than does sulfur content in the leaf. It is constantly observed and interesting to note that fluorine and sulfur content in the leaf appears to have no effect on spikelets per panicle and 1000 grain weight. Reduction in yield seems to be affected mainly by panicles per hill which are, in turn, affected more by fluorine content in the leaf as demonstrated by the standard partial coefficient analysis. Regarding the prediction sum of the square of the regression equation, the lowest value was found when nine variables were used for the analysis. The variables taken into consideration were the monthly sulfur and fluorine content in the leaf as well as the monthly percent of leaf damage during the months of June, July and August. A significant correlation is found between the actual and predicted yields by the regression equations selected as a result of a prediction sum of the square analysis.

• Restorative Dentistry and Endodontics
• /
• v.24 no.2
• /
• pp.310-321
• /
• 1999

In this in vitro study, confocal laser scanning microscopic morphology of dentin-resin interface and its relationship to shear bond strength were investigated after the exposed dentin surfaces were treated with 3 different kinds of dentin adhesive systems[three-step; Scotchbond Multi-Purpose Plus(SMPP), self-priming bonding resin; Single Bond(SB), self-etching primer; Clearfil Liner Bond 2(LB2)]. 52 extracted human molar teeth without caries and/or restorations. The experimental teeth were randomly divided into three groups of seventeen teeth each. In five teeth of each group, class V cavities(depth: 1.5mm) with 900 cavosurface angles were prepared at the cementoenamel junction on buccal and lingual surfaces. Bonding resins of each dentin adhesive system were mixed with rhodamine B. Primer of SMPP was mixed with fluorescein. In group 1. the exposed dentin was conditioned with etchant, applied with above primer and bonding resin of SMPP. In group 2, with etchant and self-priming bonding agent of SB. In group 3, with self-etching primer and bonding agent of LB2. After treatment with dentin adhesive systems, composite resin were applied and photocured. The experimental teeth were cut longitudinally through the center line of restoration and grounded so that about $90{\mu}m$-thick wafers of buccolingually orientated dentin were obtained. And, $70{\sim}80{\mu}m$-thick wafers sectioned horizontally, thus presenting a dentinal tubules at 900 to the cut surface of a remaining tooth, were obtained. Primer of SMPP mixed with rhodamine B was applied to these wafers. Confocal laser scanning microscopic investigations of these wafers were done within of 24 hours after treatment. To measure shear bond strength, the remaining twelve teeth of each group were grounded horizontally below the dentinoenamel junction, so that no enamel remained. After applying dentin adhesive systems on the dentin surface, composite was applied in the shape of cylinder. The cylinder was 5mm in diameter, and 2mm in thickness. Shear bond strength was measured using Instron with a cross-head speed of 0.5mm/min. It was concluded as follows ; 1. Hybrid layer of SMPP(mean: $4.56{\mu}m$) was thicker than that of any other groups. This value was not statistically significant thicker than that of SB(mean: $3.41{\mu}m$, p>0.05), and significant thicker than that of LB2(mean: $1.56{\mu}m$, p<0.05). There was a statistical difference between SB and LB2(p<0.05). 2. Although there were variations in the length of resin tag even in a sample, and in a group, most samples in SMPP and SB showed resin tags extending above $20{\mu}m$. But samples in LB2 showed resin tags of $10{\mu}m$ at best. 3. Besides primer's infiltration into demineralized peritubular dentin and dentinal tubules, fluorophore of primer was detected in the lateral branches of dentinal tubules. 4. All groups demonstrated statistically significant differences from one another(p<0.05), with shear bond strengths given in descending order as follows: SMPP(18.3MPa), SB(16.0MPa) and LB2(12.4MPa). 5. LB2 having thinnest hybrid layer($1.56{\mu}m$) showed the lowest shear bond strength(12.4MPa).

• The Journal of Engineering Geology
• /
• v.18 no.4
• /
• pp.555-566
• /
• 2008

Hydrogeochemical study in Samseung area (Boeun, Chungbuk) and waterrock interaction experiment using rock samples from the area were performed to elucidate the fluoride source in groundwater and explaining geochemical behavior of fluoride ion. Fluoride concentration of public water supply mostly using groundwater in Boeun area was significantly higher in South Korea. The maximum fluoride concentration of the study area was 3.9 mg/L, and 23% of samples exceeded the Korean Drinking Water Standard of fluoride (1.5 mg/L). The average concentration of fluoride was 1.0 mg/L and median was 0.5 mg/L. Because of high skewness (1.3), median value is more appropriate to represent fluoride level of this area. The relationships between fluoride ion and geochemical parameters ($Na^+$, $HCO_3$, pH, etc.) indicated that the degree of waterrock interaction was not significant. However, high fluoride samples were observed in $NaHCO_3$ type on Piper's diagram. The negative relationship between fluoride and $NO_3$ ion which might originate from surface contaminants was obvious. These results indicate that fluoride ion in groundwater is geogenic origin. The source of fluoride was proved by waterrock interaction batch test. Fluoride concentration increased up to 1.2 mg/L after 96 hours of reaction between water and biotite granite. However, the relationship between well depth and fluoride ion, and groundwater age and fluoride ion was not clear. This indicates that fluoride ion is not correlated with degree of waterrock interaction in this area but local heterogeneity of fluoriderich minerals in granite terrain. High fluoride concentration in Boeun area seems to be correlated with distribution of permeable structures in hard rocks such as lineaments and faults of this area. This entails that the deep bedrock groundwater discharges through the permeable structures and mixed with shallow groundwater.