• 대한임베디드공학회논문지
• /
• 제17권2호
• /
• pp.109-114
• /
• 2022

This paper proposes a 2D joystick and LoRa-based teleoperation system for the Ackermman steering mobile robot. The proposed joystick mapping algorithm reduces the linear speed of the robot when the joystick is steered in the direction of the maximum steering angle in the high-speed driving state of a mobile robot to reduce the risk of rollover. The LoRa-based remote operation system is designed for remote operation of mobile robots that require long range communication with relatively little data transmission and low power. The proposed system is implemented and the experimental results demonstrate the effectiveness of the teleoperation system with respect to the stability of communication strength and the robot motion.

• 대한임베디드공학회논문지
• /
• 제17권2호
• /
• pp.123-128
• /
• 2022

This paper proposes a mobile robot platform for education that can experiment with various autonomous driving algorithms such as obstacle avoidance and path planning. The platform consists of a robot module and a remote controller module, both of which are based on the Arduino Nano 33 IoT embedded board. The robot module is designed as a differential drive type using two encoder motors, and the speed of the motor is controlled using PID control. In the case of the remote controller module, a command to control the robot platform is received with a 2-axis joystick input, and an elliptical grid mapping technique is used to convert the joystick input into a linear and angular velocity command of the robot. WiFi and Zigbee are used for communication between the robot module and the remote controller module. The proposed robot platform was tested by measuring and comparing the linear velocity and angular velocity of the actual robot according to the linear velocity and angular velocity commands of the robot generated by the input of the joystick.

• 드라이브 ㆍ 컨트롤
• /
• 제17권3호
• /
• pp.33-46
• /
• 2020

We introduce a piece of special-purpose equipment for responding to disasters that has a dual-arm manipulator consisting of six-axis multi joints, and a master-slave operating system controlled by a wearable joystick for intuitive and convenient operation. However, due to the complexity and diversity of a disaster environment, training and suitable training means are needed to improve the interaction between the driver and equipment. Therefore, in this paper, a system that can improve the operator's immersion in the training simulation is proposes, this system is implemented in a virtual environment. The implemented system consists of a cabin installed with the master-slave operation system, a motion platform, visual and sound systems, as well as a real-time simulation device. This whole system was completed by applying various techniques such as a statistical mapping method, inverse kinematics, and a real-time physical model. Then, the implemented system was evaluated from a point of view of the appropriateness of the mapping method, inverse kinematics, the feasibility for real-time simulations of the physical environment through some task mode.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1190-1194
• /
• 2007

Since the dismantling processes of building are very dangerous, there have been many studies to develop a remote operating devices using joystick. In this paper, in order to improve the operability of the dismantling actuator that is usually an excavator, a novel concept of tele-operated haptic device is proposed. Operators who use this haptic device with additional environmental sensing devices can work safely away from the dangerous sites. First, based on the concept design of the haptic device, the workspace mapping from the haptic device to the excavator is explored. Second, the kinematics which deals with the conversion from the 3 dimensional position information of the haptic device to the joint variable information of the backhoe is included. Lastly, 3D graphical simulation of both haptic device and the backhoe will be shown. This new design of the haptic device can be easily manufactured and gives the workers very convenient and transparent remote control capability.

• 한국정밀공학회지
• /
• 제25권7호
• /
• pp.95-102
• /
• 2008

Since the processes of dismantling are very dangerous, there have been many studies to develop remote operating devices using joystick. In this paper, in order to improve the operability of the dismantling equipment that is usually an excavator, a novel concept of tole-operated device is proposed. Operators who use this device with additional environmental sensing devices can work safely away from the dangerous sites. First, based on the concept design of the remote controller, its workspace is analyzed and the workspace mapping from the device to the excavator is explored. Second, after 7 steps of the excavating processes are defined, the kinematics which deals with the conversion from the 3 dimensional position information of the device to the joint variable information of the backhoe is included in this paper. Lastly, 3D graphical simulation of both remote controller and the backhoe will be shown. This new design of the remote control device tan be easily manufactured and gives the workers very convenient and transparent remote control capability.