• 대한한의학회지
• /
• 제37권3호
• /
• pp.97-111
• /
• 2016

Objectives: This study aims to investigate the policy status of traditional medicine standardization between Korea and China as well as to derive a strategic development plan for Korean medicine standardization. Methods: The existing national plans and preceding studies on traditional medicine standardization in Korea and China were reviewed, and scope of the study was categorized as having three main aspects: infrastructure; standard development and standardization activities; and application and diffusion. Results: Nine development plans for Korean medicine standardization derived under the study were as follows: With regard to infrastructure of standardization, 1) standardization plan of Korean medicine shall be established based on involvement of multi-government ministries. 2) It shall be set with a consistent cooperation process among standardization-related organizations, as well as 3) encourage the industry to participate in standardization activities. To activate standards development, 4) launching the R&D-standardization-industrialization linked project, 5) supporting Korean medicine society and the mirror committee for motivation, and 6) planning the international joint research for development of standard and expanding standardization activities are recommended. In the aspect of application, there is a need for 7) expanding certification systems for the industry and 8) evaluation and feedback on the life-cycle of standardization. Lastly, 9) educational programs for training experts of standardization shall be developed and implemented. Conclusions: In order to invigorate standardization activities for Korean medicine, enhancement of planning and evaluation capacity, ensuring the strategic development of standards, broadening boundaries of international standardization activities, and training professionals are required.

• 한국해양공학회지
• /
• 제34권6호
• /
• pp.454-460
• /
• 2020

In 2019, the Korean government announced the 3rd Basic Plan for Energy, which included expanding the rate of renewable energy generation by 30-40% by 2040. Hence, offshore wind power generation, which is relatively easy to construct in large areas, should be considered. The East Sea coast of Korea is a sea area where the depth reaches 50 m, which is deeper than the west coast, even though it is only 2.5 km away from the coastline. Therefore, for offshore wind power projects on the East Sea coast, a floating offshore wind power should be considered instead of a fixed one. In this study, a response analysis was performed by applying the analytical conditions of IEC61400-3-2 for the design of floating offshore wind power generation systems. In the newly revised IEC61400-3-2 international standard, design load cases to be considered in floating offshore wind power systems are specified. The upper structure applied to the numerical analysis was a 5-MW-class wind generator developed by the National Renewable Energy Laboratory (NREL), and the marine environment conditions required for the analysis were based on the Ulsan Meteorological Buoy data from the Korea Meteorological Administration. The FAST v8 developed by NREL was used in the coupled analysis. From the simulation, the maximum response of the six degrees-of-freedom motion and the maximum load response of the joint part were compared. Additionally, redundancy was verified under abnormal conditions. The results indicate that the platform has a maximum displacement radius of approximately 40 m under an extreme sea state, and when one mooring line is broken, this distance increased to approximately 565 m. In conclusion, redundancy should be verified to determine the design of floating offshore wind farms or the arrangement of mooring systems.

• 통상정보연구
• /
• 제12권1호
• /
• pp.3-33
• /
• 2010

Paperless trade is a new trade paradigm that has innovated on traditional trade procedures, which relied on manual work in the past, and applied an IT-based e-document standard. To realize paperless trade in Korea, a lot of efforts have been made. Korea has overcome many difficulties, a lack of awareness, trials and errors, etc. at the initial introduction stage and strived to establish a stable infrastructure through the government's policy support and active cooperation with the trade business communities and related organizations. Now, Korea became a well-known leader in IT industry, especially in the paperless trade infrastructure and strategic policies. The one-stop trading system named 'uTradeHub' is operated by a paperless trade service provider, Korea Trade Network(KTNET). uTradeHub includes trade finance and settlement, customs clearance and export and import logistics, improving trading procedures and reducing related expenses. Private-Public joint efforts from Korean government and private sectors which have respectively fulfilled their role and function with market-oriented practical policies and strategies has lead Korea a world leading country in paperless trade. Moreover, Korea expended its efforts to the global areas. Korea has started to activate multi-national paperless trade alliances such as PAA(Pan-Asia e-Commerce Alliance), ASEAL(Asia Europe Alliance for Paperless Trading) as well as established the bilateral cooperative networks with China and Taiwan. The one-stop trading system, uTradeHub should keep close cooperations between nations since trade itself is implemented in a cross-border ways. In the near future, it is expected uTradeHub can achieve best results in the simplification of procedures and cost savings when an international linkage is completely established with international cooperations.

• 한국해양공학회지
• /
• 제34권3호
• /
• pp.208-216
• /
• 2020

The Integrated Offshore Standard Specification (IOSS) involves Korean shipyards, classification societies, research institutes, the Korean industrial society, engineering companies, and oil companies with the objective of reducing costs and risks without compromising safety in international offshore engineering procurement construction (EPC) projects using new standardized bulk components and qualification procedures. The activities of the IOSS include the analysis of the existing rules and regulations to achieve the best standardization, which is reflected in the best practices, and minimize the variables in regulations and rules. In addition, a standard inventory of shapes and dimensions, referred to as specifications, is proposed in the IOSS. In this paper, the aluminum tertiary standardization part (IOSS S102-1/2 S104: Specification for Structural Tertiary Design) is presented with the details of the procedures, background reviews, and cost-benefit analyses of the design and verification methods for standard designs in the IOSS standardization items. Based on the cost-benefit analysis, the application of standardized aluminum tertiary items to offshore projects has significant advantages in terms of maintenance and repair compared to the carbon steel tertiary items utilized in current industrial practices.

• International journal of advanced smart convergence
• /
• 제7권1호
• /
• pp.33-41
• /
• 2018

This study was designed to provide basic data for developing exercise program that helps correcting posture by knowing the effect of strengthening and elongation exercises of upper extremity muscle to forward head posture correction. In this study determined subjects whether they had forward head posture or not. On the basis of the New York state posture rating, if a subject's posture is match up with the normal standard posture, gives 5 points and if the posture is slightly get out of the normal standard posture, gives 3 points and if the posture is apparently get out of the standard, gives 1 points. When determining the forward head posture, if talus, humerus and outer ear center are on the same line, it is determined as normal and if outer ear center is off the line less than 1.0cm, it is a slight deformation and if outer ear center is off the line more than 1.0cm, it is a high deformation. In the study selected people who have more than 1 cm gap between two vertical lines start from outer ear center and acromion separately as subjects. Length between the ideal alignment line measured by using goniometer and temporal region showed statistically significant decrease as $2.36{\pm}1.07cm$ before the intervention and $1.06{\pm}0.88cm$ after the intervention. After 4 weeks of neck and chest extensor muscle exercise, the group who exercised both showed increase in range of neck joint motion and neck flexion of the forward head posture. Meanwhile the group who only exercised neck extensor muscle only and the group who only exercised chest extensor muscle didn't showed statistically significant result. That only the group who exercised both muscles showed significant result is the different with studies before. Because this study didn't target patient who had a lesion, couldn't compare effect of the conservative manner and exercise. However, this study provides the fact that the group who exercised both neck and chest muscle had more effect than the control group.

• 무역상무연구
• /
• 제14권
• /
• pp.177-218
• /
• 2000

Global Electronic Trading means that trading partners trade each other via Global Electronic Trading Network, that is, global business to business electronic commerce. Recently, where the cargo arrives ahead of the B/L, the importer cannot take delivery of the cargo without the B/L. This situation is referred to as the B/L dilemma. But the BOLERO system will resolve this B/L dilemma. Bolero Project is developing a cross industry utility platform for the secure, electronic transfer of commercial trade information world wide. After the successful testing of an original pilot project, The Bolero Association was formed in 1995 by a group of interested cross industry companies. As a joint venture between SWIFT and TT Club, bolero.net is changing the way the world trades by providing a web-based, paperless mode of commerce that is designed to become a global standard. Bolero International Limited published the first edition of Bolero Rulebook in 1999. The Bolero Rulebook as amended from time to time, governing the relationship between Users and their rights and obligations arising from the Bolero system. The Bolero service will be governed by a multilateral contract called the Bolero Rule Book which specifies the rights and responsibilities of Bolero and its users. The Title Registry and Bolero Bill of Lading provide a fully functional equivalent to the paper bill of lading. The Bolero Bill of Lading can be created, transferred, amended, and surrendered by way of designating to order party, blank endorsement, refusal by the transferee etc. Thus, this study deals with the functions of Bolero Bill of Lading and the problems and solutions in the Bolero Bill of Lading in point of definitions and operation under the Bolero Rulebook.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권1호
• /
• pp.536-551
• /
• 2017

With the advancement and deployment of leading-edge telecommunication technologies for sensing and collecting, computing related information, Cloud of Things (CoTs) has emerged as a typical application platform that is envisioned to revolutionize the daily activities of human society, such as intelligent transportation, modern logistics, food safety, environmental monitoring, etc. To avoid any possible malicious attack and resource abuse, employing hash functions is widely recognized as one of the most effective approaches for CoTs to achieve message integrity and data authentication. The Whirlpool hash function has served as part of the joint ISO/IEC 10118-3 International Standard by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). In this paper, we propose an effective differential fault analysis on Whirlpool in the byte-oriented random fault model. The mathematical analysis and experimental results show that 8 random faults on average are required to obtain the current 512-bit message input of whirlpool and the secret key of HMAC-Whirlpool. Our work demonstrates that Whirlpool and HMAC-Whirlpool are both vulnerable to the single byte differential fault analysis. It provides a new reference for the security analysis of the same structure of the hash functions in the CoTs.

• 기술혁신연구
• /
• 제23권3호
• /
• pp.201-223
• /
• 2015

국제 표준화에서 양대 세력인 유럽과 미국의 활동 양상은, 한국과 같은 후발 주자에게 시사하는 바가 많다. 이에 관한 기존 연구는 비계량적 접근으로서 국제정치와 제도 비교를 중심으로 전개되었고, 계량적 연구는 개별 기업이나 국가가 점유한 표준 특허, 기고서, 의장단 등 단편적 수치를 비교하는데 그치고 있어, 국제표준화에서 주요 국가의 활동 양상을 구체적으로 설명하지 못하는 한계가 있다. 따라서 본 연구는 국제표준화에서 유럽과 미국의 활동 양상에 대한 구체적 이해를 제공하고, 한국의 표준화 정책을 위한 구체적 목표 설정과 실행 수단을 제시하는 것을 목표로 하였다. 이를 위해 본 연구는 문헌고찰 연구방법을 적용하여, ISO에 등록된 공식 업무 기록을 수집한 후, 각국의 활동 내용을 차별적으로 기재한 문서를 추출하였고, 다시 이 내용을 분석하여, 기록 내용을 부호화하고, 수치로 집계하여, 표준화 참여 국가의 활동 양상을 구체적으로 비교하고 설명한다. 따라서 전체 52종의 ISO 업무 문서 중에서, '신규 표준 제안, 투표 의견 검토 결과서, 회의 보고서, 투표 결과 보고서'를 수집, 분석하였다. 표준 기고서나 표준 특허 수량에 대한 단순 비교에 의존하는 기존 연구와 달리, 실제 국제 표준화 활동에 대한 공식 기록을 분석한 결과는 다음과 같다. 첫째, 국제 표준화에서 미국은 참가 인원과 제출 의견 등 양적인 활동에서 다른 지역을 압도하였으나, 활동의 효율성은 두번째를 차지하여, 활동 양상의 양과 질이 일치하지는 않았다. 둘째, 미국은 자국 표준 제안보다 타국가의 활동을 견제하는데 주력한 반면, 유럽 국가들은 전반적으로 고른 활동 양상을 보였다. 셋째, 유럽과 미국은 국제 투표의 우위를 위해, 다국적 기업을 활용하고 있다.

• International Journal of Korean Welding Society
• /
• 제5권1호
• /
• pp.15-28
• /
• 2005

The ball shear test was investigated in terms of the effects of test parameters, i.e., shear height and shear speed, with an experimental and non-linear finite element analysis for evaluating the solder joint integrity of area array packages. Two representative Pb-free solder compositions were examined in this work: Sn-3.5Ag-0.75Cu and In-48Sn. The substrate was a common SMD type with solder bond pad openings of 460 $\mu$m in diameter. The microstructural investigations were carried out using SEM, and the IMCs were identified with EDS. Shear tests were conducted with the two varying test parameters. It could be observed that increasing shear height, at fixed shear speed, has the effect of decreasing shear force for both Sn-3.5Ag-0.75Cu and In-48Sn solder joints, while the shear force increased with increasing shear speed at fixed shear height. Too high shear height could cause some undesirable effects on the test results such as unexpected high standard deviation values or shear tip sliding from the solder ball. The low shear height conditions were favorable for screening the type of brittle interfacial fractures or the degraded layers in the interfaces. The shear speed conditions were discussed with the stress analyses of the solder ball, and we cannot find any conspicuous finding which is related to optimum shear speed from the stress analyses.

• 근관절건강학회지
• /
• 제26권3호
• /
• pp.232-240
• /
• 2019

Purpose: The purpose of this study was to investigate the effects of exercise intention, exercise habit, exercise self-efficacy on exercise behavior with elders at welfare center. Methods: The subjects were 152 elders at the welfare center at J city. Data were collected using the questionnaires which consisted of the Exercise intention scale and the Exercise habit scale developed by Lee and Gu (2018), and the Exercise self-efficacy scale developed by Lee and Chang (2001). The collected data were analyzed with the SPSS/WIN 22.0 program, which was used for frequency, percentage, mean, standard deviation, x² test, and multiple logistic regression. Results: The regular exercise group consisted of 92 elders (62.5%) and the irregular exercise group of 60 elders (39.5%). The scores for exercise intention, exercise habits, exercise self-efficacy were 3.28±0.70, 3.92±0.61, 2.80±0.88 in regular exercise group, and 2.38±0.99, 3.00±1.07, 2.04±0.73 in irregular exercise group, respectively. Two groups were significantly different between the two groups. Multiple logistic regression analysis showed that exercise intention (OR: 2.26, 95% CI:1.19~4.28), exercise habits (OR: 1.79, 95% CI:1.01~3.15), exercise self-efficacy (OR: 1.99, 95% CI:1.11~3.57) were affecting factors for regular exercise in elders. Conclusion: To increase the regular exercise behaviors of the elderly at the welfare center, it is needed the strategies to increase exercise intention, exercise self-efficacy, and exercise habits.