• Korean Journal of Applied Biomechanics
• /
• v.15 no.1
• /
• pp.29-44
• /
• 2005

The purpose of this study is to reveal the effects of two different kicks, the drop kick and the punt kick, into the kicking motion, through the kinetic comparative analysis of the kicking motion, which is conducted when one kicks a soccer goal. To grasp kinetic changing factors, which is performed by individual's each body segment, I connected kicking motions, which were analyzed by a two dimension co-ordination, into the personal computer to concrete the digits of it and smoothed by 10Hz. Using the smoothed data, I found a needed kinematical data by inputting an analytical program into the computer. The result of comparative analysis of two kicking motions can be summarized as below. 1. There was not a big difference between the time of the loading phase and the time of the swing phase, which can affect the exact impact and the angle of balls aviation direction. 2. The two kicks were not affected the timing and the velocity of the kicking leg's segment. 3. In the goal kick motion, the maximum velocity timing of the kicking leg's lower segment showed the following orders: the thigh(-0.06sec), the lower leg(-0.05sec), the foot(-0.018sec) in the drop kick, and the thigh(-0.06sec), the lower leg(-0.05sec), the foot(-0.015sec) in the punt kick. It showed that whipping motion increases the velocity of the foot at the time of impact. 4. At the time of impact, there was not a significant difference in the supporting leg's knee and ankle. When one does the punt kick, the subject spreads out his hip joint more at the time of impact. 5. When the impact performed, kicking leg's every segment was similar. Because the height of the ball is higher in the punt kick than in the drop kick, the subject has to stretch the knees more when he kicks a ball, so there is a significant affect on the angle and the distance of the ball's flying. 6. When one performs the drop kick, the stride is 0.02m shorter than the punt kick, and the ratio of height of the drop kick is 0.05 smaller than the punt kick. This difference greatly affects the center of the ball, the supporting leg's location, and the location of the center of gravity with the center of the ball at the time of impact. 7. Right before the moment of the impact, the center of gravity was located from the center of the ball, the height of the drop kick was 0.67m ratio of height was 0.37, and the height of the punt kick was 0.65m ratio of height was 0.36. The drop kick was located more to the back 0.21m ratio of height was 0.12, the punt kick was located more to the back 0.28m ratio of height was 0.16. 8. There was not a significant difference in the absolute angle of incidence and the maximum distance, but the absolute velocity of incidence showed a significant difference. This difference is caused from that whether players have the time to perform of not; the drop kick is used when the players have time to perform, and punt kick is used when the players launch a shifting attack. 9. The surface reaction force of the supporting leg had some relation with the approaching angle. Vertical reaction force (Fz) showed some differences in the two movements(p<0.05). The maximum force of the right and left surface reaction force (Fx) didn't have much differences (p<0.05), but it showed the tendency that the maximum force occurs before the peak force of the front and back surface (Fy) occurs.

• The Korean Nurse
• /
• v.31 no.2
• /
• pp.51-69
• /
• 1992

Grief that is not acknowledged and worked through may manifest itself in some emotional, mental or physical problem. In recent years much has been learned about coping with grief which the hospice program can utilize to help family members cope with their grief. This study was carried out to determine the helpfulness of the bereavement care of Severance Hospice and to learm more about the grief response of the bereaved. The tools used to collect data were an assessment form used in the bereavement program and the Grief Experience Inventory developed by Sanders and revised and translated 'by the researcher. Data was obtained from bereaved family members(54 for the final grief assessment and 39 for the grief response assessment) receiving bereavement follow-up, from July 1989 to March 1991. Results of the study were as follows: 1. Final Grief Assessment Regarding the resolution of their grief the majority of the bereaved accepted the reality of the death of their family member, while slightly more than three-quarters were able to express their feelings toward their loss. A large majority had returned to activities of daily living well or fairly well and had reinvested their energy in a person other than the deceased. In addition, the physical condition of the majority was good or fairly good. A majority of the bereaved considered the bereavement care to be helpful and almost three-quarters were not considered to be in need of more follow-up. 2. Grief Response Assessment Age was found to have a modoerately positive correlation to appetite disturbance(r=.41, P<.Ol) and loss of vigor(r=.37, P<.Ol) A moderately positive correlation was found between the number of contacts and sleep disturbance(r=2.38, P<.01) Significant differences were found between men and women in regard to guilt(t=2.38, P<.05), social isolation(t=2.44, P<.05) and depersonalization(t=2.07, P<.05) with men having the more intense grief. Significant differences were found in the grief responses of somatization(F=5.82, P<.001), physical symptoms(F=5.87, P<.OOl), appetite disturbance(F=4.40, P<.Ol), despair(3.79, P<,Ol), anger(Fp2.83, P<.05), social isolation(F=3.61, P<.05), guilt(F=3.62, P<.05) and depersonalization (F = 2.58, P <.05). In the first six of these grief responses mothers scored highest, followed by husbands and then wives, In the grief response of guilt, daughters scored highest and on the grief response of depersonalization sons scored highest. Only one grief response, that of sleep disturbance(t= -2.19, P<.05) was found to be statistically significant, with those family members who died at home having the higher scores. Based on the results of this study several suggestions are presented as follows: 1. Since unresolived grief can have a detrimental effect on the bereaved person's mental and phys. ical health it would be good for the nurse, to include questions related to death of family members and the bereaved person's response to the grief, in her nursing assessment. And in the case of unresolved grief the nurse should encourage the person to talk with a trusted friend or counselor and express their fellings of grief. 2. A study to determine the degree of resolution of the grief of those in the bereavement program could be carried out by use of the Grief Experience Inventory early in their bereavement and again 13 months after the death of their family member. 3. A comparison of the grief response of the bereaved in the bereavement program and bereaved not in the program could be carried out using the Grief Experience Inventory. 4. After bereavement programs have been started in other hospice programs it would be good to carry out a joint study of bereavement outcomes of those in the bereavement programs.

• Korea journal of population studies
• /
• v.35 no.1
• /
• pp.101-130
• /
• 2012

This study examines mortality change in North Korea and its association with state production and welfare systems. Two main subjects are analyzed. The first theme is to examine the reliability of mortality related data released by North Korea government authorities. Examining inner consistencies among mortality related statistics and comparing with mortality trends in other socialist societies, the study finds that mortality rate was under estimated. Under-estimation of mortality by North Korean authorities is regarded to result not only from political purpose which aims to propagate the regime's superiority but also from enumeration errors of vital statistics based on the residence registration. The second theme is to estimate the change in mortality of North Korean people since the establishment of DPRK, correcting errors of mortality data. Mortality of North Korean people is estimated to have improved largely by the early 1970s, to have been sluggish hereafter, and finally to have increased during the economic hardship period between 1993 and 2008. While large people died during the food crisis in the late 1990s, however the population loss caused by mortality increase was not so great as the proposition of the huge starvation was expected. It is partly because population turbulence occurred not just by mortality increase, rather it has progressed in the joint effects of fertility decline and exodus of North Korean people for food. It is also due to North Korean people's voluntary activities of informal economy. It is also worth noting the high mortality rate of North Korean men. The high mortality of North Korean men is likely due to men's mobilization for long time in army and labor with high risk of accident and their life styles.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.6
• /
• pp.709-734
• /
• 2001

The aims of this experiment were to investigate the strain and temperature changes simultaneously within autopolymerzing acrylic resin specimens. A computerized data acquisition system with an electrical resistance strain gauge and a thermocouple was used over time periods up to 180 minutes. The overall strain kinetics, the effects of stress relaxation and additional heat supply during the polymerization were evaluated. Stone mold replicas with an inner butt-joint rectangular cavity ($40.0{\times}25.0mm$, 5.0mm in depth) were duplicated from a brass master mold. A strain gauge (AE-11-S50N-120-EC, CAS Inc., Korea) and a thermocouple were installed within the cavity, which had been connected to a personal computer and a precision signal conditioning amplifier (DA1600 Dynamic Strain Amplifier, CAS Inc., Korea) so that real-time recordings of both polymerization-induced strain and temperature changes were performed. After each of fresh resin mixture was poured into the mold replica, data recording was done up to 180 minutes with three-second interval. Each of two poly(methyl methacrylate) products (Duralay, Vertex) and a vinyl ethyl methacrylate product (Snap) was examined repeatedly ten times. Additionally, removal procedures were done after 15, 30 and 60 minutes from the start of mixing to evaluate the effect of stress relaxation after deflasking. Six specimens for each of nine conditions were examined. After removal from the mold, the specimen continued bench-curing up to 180 minutes. Using a waterbath (Hanau Junior Curing Unit, Model No.76-0, Teledyne Hanau, New York, U.S.A.) with its temperature control maintained at $50^{\circ}C$, heat-soaking procedures with two different durations (15 and 45 minutes) were done to evaluate the effect of additional heat supply on the strain and temperature changes within the specimen during the polymerization. Five specimens for each of six conditions were examined. Within the parameters of this study the following results were drawn: 1. The mean shrinkage strains reached $-3095{\mu}{\epsilon},\;-1796{\mu}{\epsilon}$ and $-2959{\mu}{\epsilon}$ for Duralay, Snap and Vertex, respectively. The mean maximum temperature rise reached $56.7^{\circ}C,\;41.3^{\circ}C$ and $56.1^{\circ}C$ for Duralay, Snap, and Vertex, respectively. A vinyl ethyl methacrylate product (Snap) showed significantly less polymerization shrinkage strain (p<0.01) and significantly lower maximum temperature rise (p<0.01) than the other two poly(methyl methacrylate) products (Duralay, Vertex). 2. Mean maximum shrinkage rate for each resin was calculated to $-31.8{\mu}{\epsilon}/sec,\;-15.9{\mu}{\epsilon}/sec$ and $-31.8{\mu}{\epsilon}/sec$ for Duralay, Snap and Vertex, respectively. Snap showed significantly lower maximum shrinkage rate than Duralay and Vertex (p<0.01). 3. From the second experiment, some expansion was observed immediately after removal of specimen from the mold, and the amount of expansion increased as the removal time was delayed. For each removal time, Snap showed significantly less strain changes than the other two poly(methyl methacrylate) products (p<0.05). 4. During the external heat supply for the resins, higher maximum temperature rises were found. Meanwhile, the maximum shrinkage rates were not different from those of room temperature polymerizations. 5. From the third experiment, the external heat supply for the resins during polymerization could temporarily decrease or even reverse shrinkage strains of each material. But, shrinkage re-occurred in the linear nature after completion of heat supply. 6. Linear thermal expansion coefficients obtained from the end of heat supply continuing for an additional 5 minutes, showed that Snap exhibited significantly lower values than the other two poly(methyl methacrylate) products (p<0.01). Moreover, little difference was found between the mean linear thermal expansion coefficients obtained from two different heating durations (p>0.05).

• Korean Journal of Food Science and Technology
• /
• v.43 no.3
• /
• pp.387-395
• /
• 2011

We analyzed the estimated daily intake of sweeteners in the Korean population, using data from national health and nutrition studies regarding the concentration of sweetener in each type of food, food intake by gender, age group, and weight. The level of safety of these sweeteners was evaluated by comparisons with the acceptable daily intake (ADI) data established by the Joint FAO/WHO expert committee on food additives. The estimated daily intake (EDI) of sodium saccharin was $52.31{\mu}g/kg{\cdot}bw$, $55.06{\mu}g/kg{\cdot}bw$ acesulpham-K, $145.47{\mu}g/kg{\cdot}bw$ aspartame, and $93.86{\mu}g/kg{\cdot}bw$ sucralose per day. The percentages in relation to ADI were 1.0%, 0.4%, 0.4%, and 0.6% respectively, which were all within safe levels. The relatively higher-consuming groups were taking $783.12{\mu}g/kg{\cdot}bw$ sodium saccharine, $4,399.09{\mu}g/kg{\cdot}bw$ aspartame, $1,557.09{\mu}g/kg{\cdot}bw$ acesulpham-k, and $2,700.72{\mu}g/kg{\cdot}bw$ sucralose per day, and their intake levels as a percentage of ADI were 15.7, 11.0, 10.4, and 18.0%, respectively, which were all within safe levels.

• Economic and Environmental Geology
• /
• v.23 no.4
• /
• pp.369-381
• /
• 1990

Most of significant ore deposits in South Korea such as the Sangdong W - Mo, the Yeonhwa Pb-Zn and the Geodo Cu-Fe skarn ore deposits occur at the southern limb of the Hambaeg syncline in the Taebaeg Basin. The mineralization took place in the interbedded limestone of the Myobong Formation and the Pungchon limestone of the Great Limestone Group of the Cambrian age, generally striking E-W and dipping 25-30 degrees north. There are no outcrops of the skarn-type orebody at the northern limb of the syncline. In order to find a clue of a possible hidden orebody localized at the limestones in the northern limb, a lithogeochemical exploration by using carbon isotope and some elements such as Si, Ca, Fe and Al at the Sangdong Mine area has been attempted as for a modelling study. For this study, 45 samples from the Pungchon limestone which do not show any megascopic indication of mineralization have been taken in both the mineralized zone and the unminerallized zone at the Sangdong Mine area. Analytical data show that there are big differences in the contents of CaO and $Al_2O_3$ between the Pungchon limestone of the mineralized zone and that of the unmineralized zone. Carbon isotope data exhibit that ${\delta}^{13}C$ values of the Pungchon limestone in the mineralized zone are highter than those in the unmineralized zone. The difference in the analytical values of CaO, $Al_2O_3$ and the carbon isotope between the mineralized and the unmineralized zones is as follows ; Unminerallized zone Mineralized zone CaO 51.3% 43.5% $Al_2O_3$ 0.6% 2.4% ${\delta}^{13}C$ -0.39 permil -0.56 permil $Fe_2O_3$ 0.9% 1.4% $SiO_2$ 3.0% 2.4% The decrease in the Si content of the Pungchon limestone in the mineralized zone is contrary to the result of the previous study (Moon, 1987). On the basis of identification of the increase in the Al content of the limestone in the mineralized zone, it could be deduced that the decrease in the Si content of the Pungchon limestone might be due to the result of increase in the alteration products mainly occurred along fracture-system such as joint cracks or minor faults and that the phenomena shown by the Si and Al content in the mineralized zone might be derived from the thermal effect of granite extended mineralizing activity to the overlied limestone on the surface. Higher mean values of Fe and Al as well as lower mean values of carbon content and the ${\delta}^{13}C$ than mean values of those in the Pungchon limestone at the northern limb of the Hambaeg Syncline may be applicable in exploration for blind orebodies.

• Journal of Energy Engineering
• /
• v.29 no.1
• /
• pp.85-99
• /
• 2020

This article analyzes the influence of sectoral system of innovation(i.e. technological regime, market demand, networks, and institution) on innovative performances(i.e. product-, process-, organizational-, marketing-, and environmental- innovation) in Korean environmental industry, conducting a multiple regression analysis based on survey data from 201 Korean environmental companies. As the results, product innovation is positively influenced by internal technology accumulation and market demand response, while not affected by external knowledge utilization, market competition, networks among market and non-market agents, government support and regulation. Process innovation is positively influenced by internal technology accumulation, networks among non-market agents and regulation, but not by external knowledge utilization, market demand response, market competition, networks among market agents, and government support. While organizational innovation is positively influenced by internal technology accumulation, external knowledge utilization and regulation, it is not affected by market demand response, market competition, networks among market and non-market agents, and government support. While marketing innovation is positively influenced by internal technology accumulation, networks among non-market agents, and government support, it is not affected by external knowledge utilization, market demand response, market competition, networks among market agents, and regulation. Environmental innovation is positively influenced by external knowledge utilization and regulation, but negatively influenced by market competition. It is not affected by internal technology accumulation, market demand response, networks among market and non-market agents, and government support. Such results suggests the following policy implications. First, it is necessary to expand the sphere of relating markets through the application of convergence technology, new regulations, and overseas markets. Second, reinforcing ecosystems among environmental market agents through demand-linked joint R&D should be revitalized. Third, it is needed to strengthen more supporting policies rather than regulation. This article has the limitation of using the survey data. And further researches on the environmental sectoral system of innovation structure itself will be tried.

• Journal of dental hygiene science
• /
• v.15 no.2
• /
• pp.119-128
• /
• 2015

The purpose of this study is to understand the effects of obesity and stress on oral disease in Korean adults by using the data of the Fifth Korea National Health and Nutrition Examination Survey. The subjects of this study are 4,627 adults at the age of 19 to 64, and the data were analyzed by using SPSS Windows ver.18.0. The results are as follows: Obesity was higher in men and the age of 40 to 64 than the other. And the group with lower education or lower income level tended to show significantly higher obesity (p<0.05). As for stress, women, the age of 19 to 39 and the subjects with higher academic career tended to indicate significantly higher stress (p<0.05). As for the effects of obesity on oral disease, there were no significant difference between body mass index (BMI) or waist-hip ratio (WHR) and oral disease but there was statistically significant difference between stress and temporomandibular joint disorder (TMD) (p<0.05). Even when the subjects with stress were obese or abdominally obese, there was no significant difference in oral disease (p>0.05). As to correlation among variables, there were correlations between BMI and WHR, stress and TMD, masticatory problems and periodontal disease or TMD (p<0.05). About the effects of general characteristics, obesity, and stress on oral disease, age was the variable influencing TMD, and age and abdominal obesity were the variables influencing masticatory problems (p<0.05). In this society, the environment surrounding individuals is fairly complex, and the concept of health including quality of life has more complex meaning than in the past. Various factors are influencing obesity and stress, and they are also influencing oral health and behaviors. Accordingly, it will be needed not only to make efforts to reduce obesity and stress but also to employ approaches from different perspectives to improve oral health.

• Korean Journal of Weed Science
• /
• v.12 no.2
• /
• pp.144-157
• /
• 1992

The study was conducted to compare the interprete methods and examine the feasibility of mixture use of oxyfluorfen and bensulfuron in controlling principal Paddy weeds, annuals and perennials. Application ratio of both chemicals were obtained from the combinations of 5 levels(0, 5, 10, 15, 20 g ai/ha) of each chemicals, respectively. All the treatments were applied at 5 days after transplanting and water was maintained at 3.0cm in depth. Shoot fresh-weight of weeds was assessed at 35 days after treatments. Data obtained was analysed by Colby, Isobole, Calculus, Regression and EQM method, respectively. The results from the analysis of variance on the principal weeds treated with oxyfluorfen and bensulfuron showed significant interactions at 1% level on both Echinochloa crus-galli and Eleocharis Kuroguwai, and total species at 0.5% level on both Potamogeton distinctus and Cyperus serotinus, but non significant on Scirpus juncoides and Sagittaria pygmaea. Thereafter, the results of the models applied to Echinochloa crus-galli, Eleocharis kuroguwai and total species were as follows ; 1. The Colby method gave values nearly identical to regression estimate method (both multiplicative models) as provided by Akobundu et al. The Colby method and Regression method indicated synergistic toward Echinochloa curs-galli, and total species, but antagonistic toward Eleocharis kuroguwai. 2. The Isobole method shows synergism on Echinochloa crus-galli at $ID_{50}$, and total species at $ID_{60}$ on Eleochari kuroguwai. 3. The Calculus method gave positive signs for the first differentiation and negative signs for the second differentiation except for some rates on Echinochloa crus-galli and total species, but reverse on Eleocharis kuroguwai. These result does not agree with the observed values. 4. ${\theta}$ value from the EQM method was greater than one at all combinations. This result was quite different from those of other methods. 5. The various models did not show the same results, but mixture of oxyfluorfen and bensulfuron tend to have synergistic effect. Weeding effect also was high. Treatment in terms of two chemical combination was expected to reduce rates, and to enhence weeding efficacy compared with single treatment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.628-634
• /
• 2016

Many pitchers suffer from various types of injury (distortion, sprain and so on). The rate of injury is increased if there are differences in strength between the extensor and flexor muscles when a joint movement is performed with maximum speed. However, there has been insufficient research into the injury caused by strength differences between the extensor and flexor muscles. Thus, the purpose of the study was to examine the effects of elbow ulnar collateral ligament injury on the maximal isometric strength in young baseball pitchers. The data collection was conducted for 2 weeks. The subjects (n=36) who participated in this study were placed into either the injury group (n = 18, IG) or normal group (n = 18, NG). The maximal isometric strength for the pectoralis major (PM), infraspintus (I), biceps brachii (BB), triceps brachii (TB), flexor carpi radialis (ECR) and extensor carpi radialis (FCR) muscles were determined by an isometric strength machine (K-DFX) and then the differences in strength were calculated by muscle group. All of the data were analyzed by SPSS 18.0 with the independent t-test. In the results, the maximal isometric strengths in the IG for the I (p=0.035), BB (p=0.031) and TB (p=0.041) were significantly lower than those in the NG, while that for the ECR (p=0.047) was significantly greater. In addition, the differences of the maximal isometric strength between the PM and I (p = 0.008), BB and TB (p = 0.002), and FCR and ECR (p = 0.032) in the IG were significantly greater than those in the NG. In conclusion, the differences in muscle strengths of the subjects in the IG were greater than those in the NG, which suggests that they might have a higher injury rate in the future. However, they might be able to recover from their injury and achieve better performance if the differences in strength were reduced by training.