• The Korean Journal of Cytopathology
• /
• v.10 no.2
• /
• pp.121-126
• /
• 1999

The usefulness of E-cadherin immunostaining as a marker of malignancy in the body fluids was investigated in the present study. Thirty-three histologically proven cases of cell blocks from the pleural, peritoneal, and pericardial fluids were studied by immunocytochemistry for E-cadherin antibody using LSAB method. These cases were cytologically diagnosed as adenocarcinoma (25 cases) and atypical cells (8 cases). Tumor cells showed strong positive membranous staining for E-cadherin antibody in 21 out of 25 cases (84%) of adenocarcinoma. E-cadherin staining was not found in 6 of 8 cases of suspicious maligancy. The sensitivity and specificity were 84% and 75%, respectively. Reactive mesothelial cells and Inflammatory cells scattered were all negative. In conclusion, E-cadherin is an useful adjunctive marker to distinguish reactive mesothelial cells from the carcinoma cells in the body fluids.

• Design & Manufacturing
• /
• v.14 no.1
• /
• pp.8-14
• /
• 2020

In general, auto parts production assembly line is assembled and produced by automatic mounting by an automated robot. In such a production site, quality problems such as misalignment of parts (doors, trunks, roofs, etc.) to be assembled with the vehicle body or collision between assembly robots and components are often caused. In order to solve such a problem, the quality of parts is manually inspected by using mechanical jig devices outside the automated production line. Automotive inspection technology is the most commonly used field of vision, which includes surface inspection such as mounting hole spacing and defect detection, body panel dents and bends. It is used for guiding, providing location information to the robot controller to adjust the robot's path to improve process productivity and manufacturing flexibility. The most difficult weighing and measuring technology is to calibrate the surface analysis and position and characteristics between parts by storing images of the part to be measured that enters the camera's field of view mounted on the side or top of the part. The problem of the machine vision device applied to the automobile production line is that the lighting conditions inside the factory are severely changed due to various weather changes such as morning-evening, rainy days and sunny days through the exterior window of the assembly production plant. In addition, since the material of the vehicle body parts is a steel sheet, the reflection of light is very severe, which causes a problem in that the quality of the captured image is greatly changed even with a small light change. In this study, the distance between the car body and the door part and the door are acquired by the measuring device combining the laser slit light source and the LED pattern light source. The result is transferred to the joint robot for assembling parts at the optimum position between parts, and the assembly is done at the optimal position by changing the angle and step.

• Archives of Craniofacial Surgery
• /
• v.13 no.2
• /
• pp.111-118
• /
• 2012

Purpose: The nasal bone fracture is known as the most common facial fracture, with the postoperative results and the patient's satisfaction known to be lower than other facial fractures. The patient's satisfaction is firstly related to the accurate comprehension of the spatial relationship in the fractured nasal bone and secondly to the accurate reduction based on accurate comprehension. The aim of this study is to evaluate the objective usefulness of the three-dimensional (3D) imaging. Methods: The survey was conducted on 10 randomly selected cases of nasal bone fractures among the 46 cases with 3D computed tomography (CT) during the past one year. It was requested upon 4 plastic residents and 4 plastic surgeons to draw 3D aspect of fractured nasal bone directly on the printed photos of cadaver nasal bone, based on simple X-ray and two-dimensional (2D) CT. They were compared with the real fractured nasal bone aspects based on the 3D image and marked the difference in the 10-point scale of 0 to 10. Results: The average score of the 4 residents was 1.62 and that of the 4 surgeons was 4.47 out of 10 by simple X-ray. The average score of the 4 residents was 5.67 and that of the 4 surgeons was 7.25 out of 10 by 2D CT. Conclusion: It was surmised that the precise analysis and accurate comprehension of the spatial relationship of the fractured nasal bone using the 3D image, as based on the 2D CT images, can produce more favorable satisfaction levels in the patients.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.2
• /
• pp.94-100
• /
• 2010

Purpose: The purpose of this study was to compare the fracture strength of the zirconia ceramic crowns according to tooth position. Material and methods: After 10 metal dies were made for each group, the zirconia ceramic crowns were fabricated using CAD/CAM system ($Lava^{TM}$ All-Ceramic System) and each crown was cemented on each metal die with resin cement (Rely $X^{TM}$ Unicem). The cemented zirconia ceramic crowns mounted on the testing jig were inclined with 30 degrees to the long axis of the tooth and the universal testing machine was used to measure the fracture strength. Results: 1. The fracture strength of the zirconia ceramic crown in the lower 1st molar (2963 N) had the highest and that in the lower central incisor (1035 N) had the lowest. 2. The fracture strength of zirconia ceramic crown was higher than that of the IPS Empress crowns in all tooth position. 3. The fracture mode of the crowns was similar. Most of fracture lines began at the loading area and extended through proximal surface perpendicular to the long axis of the crowns. 4. There were no significant differences on the fracture strength of the zirconia ceramic crowns according to tooth position except in premolar group. Conclusion: Within the limitations of this study, the results suggested that strength of zirconia ceramic crown is satisfactory for clinical use.

• Journal of Korean Medical classics
• /
• v.4
• /
• pp.127-157
• /
• 1990

Geum-Won dynasty is the era which totalized the every medical attainments of before Song dynasty and appeared some medical practioners who found new medical theory based upon this, and is important time for various developments of the oriental medical theory. At this time of the era, the representative practioners are called the four noted physician of Geum-Won dynasty. Jang Won-So who influenced the formation of the theory of the four noted physcian of Geum-Won dynasty, originated new theory by joining the theory of "Nae-Gyung" with his own medical experience. The results can be summarized as follows after studying his life and idea of medicine. 1. Jang Won-So, courtesy name is Gyeol-Go, came from Yeog-Joo and it is unknown that when he was born and dead, but he lived in 11C. At 27, after failed in a Jin-Sa examination, he started medical study, and widely spreaded his medical art by healing the Yoo Wan-So's Sang-Han disease. 2. There are many Jang Won-So's writings, such as "Eui-Hag-Gye-Won" which is the condensation of his idea of medicine, "Jin-Joo-Nang" which is greatly contributed to development of Herbology, "Jang-Boo-Pyo-Bon-Han-Yeol-Heo-Sil-Yong-Yag-Sig" which is the sample of Jang-Boo-Byun-Jeung-Lon-Chi, and "Yag-Joo-Nan-Gyung" "Gyeol-Go-Ga-Jin" "Gyeol-Go-Joo-Sug-Hwa-Mag-Gyeol" "Gyeol-Go-Bon-Cho" "San-Yog-Bo-Sang-Bang" which are known do not existing. 3. Jang Won-So's study about Jang-Boo-Byun-Jeung was influenced by "Nae-Gyung" "Jung-Jang-Gyung" "So-A-Yag-Jeung-Jig-Gyeol" etc. and outline by Han-Yeol-Heo-Sil and the change and prognosis of the state of disease can be decided by Saeng-Sa-Yeog-Soon, so he contribute to development of lang-Boo-Byun-Jeung-Lon-Chi of posterity. 4. Jang Won-So succeeded and develope the theory of the herbs of Oh-Jang-Go-Yog-Bo-Sa and about Ki-Mi-Seung-Gang-Boo-Chim etc. appeared on "Nae-Gyung", especially invented such as Kwi-Gyung-Lon, In-Gyeung-Bo-Sa-Seol, Jang Boo-Pyo-Bon-Yag-Sig and he enriched the content of pharmacological theory, so he motivated various development of herbalogical theory. 5. Jang Won-So's idea of On-Yang-Bi-Wi directly influence Lee Go's assertion of Bi-Wi-Lon, idea of Go-Geum-I-Gue-Seol presented theological basis of posterior medical practioners formation of prescription, so the way of drug usage greatly developed. 6. Jang Won-So's theory of the lang-Boo-Byun-Jeung and herbology directly influenced to Lee Go, Wang Ho-Go, Na Chen-Ik, lang Byeok etc. so he became the father of Yeog-Soo class and indirectly influenced to Seol Gi, Jo Hen-Ga, lang Gae-Bin, Lee Jung-Jae etc. of Myeng dynasty, so the On-Bo class has been formed. Like this, because, his idea of medicine developed at various aspect and greatly influenced to posterity, Lee Si-Jin said "Since the emergency of "Nae-Gyung", Jang Won-So is the only man who greatly enhance medical principle.", so it is clear that this is not unfounded expression at all.

• Korean Journal of Head & Neck Oncology
• /
• v.30 no.2
• /
• pp.53-61
• /
• 2014

Background and Objectives : Anaplastic thyroid carcinoma(ATC) is a rare but highly aggressive thyroid malignancy that is associated with an extremely poor survival despite the best multidisciplinary care. BRAF(V600E) mutation is detected in about a quarter of ATC, but unlike its high treatment response to selective BRAF inhibitor (PLX4032) in metastatic melanoma, the treatment response of ATC is reported to be low. The purpose of this study is to investigate the innate resistance mechanism responsible for this low treatment response to BRAF inhibitor and its effect on epithelial-mesenchymal transition(EMT). Materials and Methods : Two ATP cell lines, 8505C and FRO were selected and treated with PLX4032 and its drug sensitivity and effects on cell migration and EMT were examined and compared. Further investigation on the changes in signals responsible for the different treatment response to PLX4032 was carried out and the same experiment was performed on both orthotopic and ectopic xenograft mouse models. Results : FRO cell line was more sensitive to PLX4032 treatment compared to 8505C cell line. The resistance to BRAF inhibition in 8505C was due to increased expression of EGFR. Effective inhibition of both EGFR and p-AKT was achieved after dual treatment with BRAF inhibitor(PLX4032) and EGFR inhibitor(Erlotinib). Similar results were confirmed on in vivo study. Conclusion : EGFR-mediated reactivation of the PI3K/AKT pathway and MAPK pathway contributes to the relative insensitivity of BRAF(V600E) mutant ATC cells to PLX4032. Dual inhibition of BRAF and EGFR leads to sustained treatment response including cell invasiveness.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.5
• /
• pp.611-620
• /
• 2007

Statement of problem: Second-generation indirect composite resins have been improved flexural strength, compressive strength, hydrolytic degradation resistance, wear resistance compared to first-generation indirect composite resins, but there are still some problems as hydrolysis and low wear resistance. Some manufacturers claim that wear resistance of their materials has been improved, but little independent study has been published on wear properties of these materials and the properties specified in the advertising materials are largely derived from in-house or contracted testing. Purpose: This study was to evaluate the wear of indirect composite resins (SR Adore, Sinfony, Tescera ATL) and gold alloy against the human enamel. Material and method: Extracted human incisors and premolars were sectioned to $2{\times}2{\times}2mm$ cube and embedded in the clear resin and formed conical shaped antagonist to fit the jig of pin-on-disk tribometer. Total 20 antagonists were stored in distilled water. Five disk samples, 24mm in diameter and 1.5mm thick, were made for each of three groups of indirect composite resins and gold alloy group, and polished to #2,000 SiC paper on auto-polishing machine. Disk specimens were tested for wear against enamel antagonists. Wear test were conducted in distilled water using a pin-on-disk tribometer under condition (sliding speed 200rpm contact load 24N, sliding distance 160m). The wear of the enamel was determined by weighing the enamel antagonist before and after test, and the weight was converted to volumes by average density. The wear tracks were analyzed by scanning electron microscopy and surface profilometer to elucidate the wear mechanisms. Statistical analysis of the enamel wear volume, wear track depth and wear tract width of disk specimens were accomplished with one-way ANOVA and the means were compared for significant differences with Scheffe's test. Results: 1. The enamel wear was most in gold alloy, but there were no statistically significant differences among all the groups (P>.05). 2. In indirect composite resin groups, the group to make the most shallow depth of wear tract was Sinfony, followed by Tescera ATL, SR Adoro (P<.05). Gold alloy was shallower than Sinfony, but there was no statistically significant difference between Sinfony and gold alloy (P>.05). 3. The width of wear tract of SR Adore was larger than the other groups (P<.05), and there were no statistically significant differences among the other groups (P>.05). 4. SEM analysis revealed that Sinfony and gold alloy showed less wear scars after test, Tescera ATL showed more wear scars and SR Adore showed the most. Conclusion: Within the limits of this study, Sinfony and gold alloy showed the least wear rates and showed similar wear patterns.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.2
• /
• pp.145-156
• /
• 2010

Loss of posterior support may cause overloading and excessive wear of remaining teeth. Moreover, the extrusion of antagonistic teeth leads to the destruction of the occlusal plane. The loss of vertical dimension of occlusion (VDO) also emerges clinically, which may bring the loss of esthetic appearance and function. These patients who suffer from the loss of posterior support, often require vigorous periodontal treatments (osteotomy, crown lengthening) and extensive oral rehabilitation. Sixty three years old female patient visited for the prosthetic treatment of the posterior edentulous area. She had no other systematic disease and parafuctional habits for prosthetic treatment. Intraoral and radiographic examinations were done. The evaluation of VDO and vertical dimension of rest position were evaluated for proper prosthetic procedures and diagnostic wax up was done. As a result of diagnosis, VDO was increased by 2 mm considering the loss of VDO and space for the prosthetic treatment. After the pretreatments, initial preparation of teeth and provisionalization were carried out. Six weeks later of provisionalizaion, final preparation and impression was performed. Using the duralay resin copings, jaw relation was registered. The master cast was mounted and definitive restoration was fabricated. After the evaluation of esthetic and function, pick up impression for clinical remounting was done. Lucia jig was made for new jaw relation and occlusal adjustment on the articulator. Definitive restoration was delivered and the patient was periodically recalled for additional occlusal adjustment. From this case, the satisfactory functional and esthetic results through full mouth rehabilitation with increase vertical dimension were achieved.

• Korean journal of communication and information
• /
• v.66
• /
• pp.242-272
• /
• 2014

This study examines why follow-up investigative programs about the sinking of the Cheonan Patrol Combat Corvette(ROKS Cheonan) have not been produced, despite much speculation surrounding the cause of the sinking since November 2010, when KBS investigative program, In-Depth 60 Minutes which had covered the incident was aired. We have uncovered four reasons through a series of in-depth interviews with producers and reporters, as follows. First, Korean military authorities monopolized relevant information, while the producers could not prove or confirm the validity of the findings of the JIG(Joint Civilian-Military Investigation Group)'s report because the facts had been revealed partially and selectively by the authorities and the press' scientific investigation were rejected by the authorities. Second, the crew of In-Depth 60 Minutes was subjected to severe disciplinary action by the Korea Communications Commission. This caused a chilling effect, - it broke the producers' resolve to further explore the reason behind the sinking. Furthermore, the screening of the investigative documentary, Project Cheonan Ship was cancelled without prior notice, presumably by the power of the State and markets. Third, the reorganization and shake-up of personnel by broadcasting stations' presidents appointed by the power of the State crushed the spirit of PD Journalism. Finally, the "red purge" factions stigmatized by the political or military, or the mainstream press, caused the producers or broadcasters to engage in self-censorship. The idea has been used in Korea as a smoke screen to deflect public attention. Nevertheless, the producers hope to shed light on the Cheonan sinking incident and to prove reasonable doubts by pursuing follow-up investigations.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.9 no.2
• /
• pp.161-168
• /
• 2015

In this paper, we present an inertial sensor-based gait distance measurement system using accelerometer, gyroscope, and magnetometer. To minimize offset and gain error of inertial sensors, we performed the calibration using the self-made calibration jig with 9 degrees of freedom. For measuring accurate gait distance, we used gradient descent algorithm to remove gravity error and used analysis of gait pattern to remove drift error. Finally, we measured a gait distance by double-integration of the error-removed acceleration data. To evaluate the performance of our system, we walked 10m in a straight line indoors to observe the improvement of removing error which compared un-calibrated to calibrated data. Also, the gait distance measured by the system was compared to the measurement of the Vicon motion capture system. The evaluation resulted in the improvement of $31.4{\pm}14.38%$(mean${\pm}$S.D.), $78.64{\pm}10.84%$ and $69.71{\pm}26.25%$ for x, y and z axis, respectively when walked in a straight line, and a root mean square error of 0.10m, 0.16m, and 0.12m for x, y and z axis, respectively when compared to the Vicon motion capture system.