• 설비공학논문집
• /
• 제4권2호
• /
• pp.96-105
• /
• 1992

The objective of this paper is to study experimentally on the noise characteristics of supersonic jet from multihole orifice in the range of jet pressure from $at_g$ to $at_g$ in the reverberation room. At first, the single orifice jets are investigated for various hole diameter from 3.8mm to 10mm. Through the noise spectrum, the turbulent mixing noise and the shock associated noise is analyzed. The noise for confined jets into a tube of diameter 30mm or 90mm with length 2m is investigated in comparision with that for the free jets. The sound power level is measured and compared with thoretical models for free jet. At second, multihole orifice jets are investigated to study the effect of multijet on noise reduction. The spectrum and power level of multijets are measured and compared with single jets. The multi-jets in a confined pipe are also investigated. It is found that the noise spectrum is significantly altered by increasing the number of jet with decrease in jet diameter and also by confining the jet into tube.

• 한국군사과학기술학회지
• /
• 제17권4호
• /
• pp.551-559
• /
• 2014

The influence of the battle damage hole on the velocity and vorticity flow field have been studied by using particle image velocimetry. Time averaged velocity and vorticity vector fields in the vicinity of jet are presented. The perforated damage hole on a wing created from a hit by anti-air artillery was modeled as a 10% chord size hole which positioned at quarter chord. At low angles of attack, the vorticity in the forward side of the jet is cancelled due to mixing with the wing surface boundary layer. Stretching of vorticity in the backside of the jet generates a semi-cylindrical vortical layer that enclosing a domain with slow moving reverse flow. Conversely, at higher the angles of attack, the jet vorticity advected away from the wing surface and remains mostly confined to the jet. The mean flow behind the jet has a wake-like structure.

• 대한기계학회논문집B
• /
• 제37권1호
• /
• pp.67-74
• /
• 2013

주류공기에 수직으로 분사되는 JICF 분사시스템은 연소실내에서 주류공기의 영향을 최소화하면서 미립화 및 연소성능을 향상시키기 위한 추진시스템의 연료분사 방식으로 넓은 적용범위를 가지고 있다. 하지만 JICF 분사시스템에서 산화제인 공기와 연료의 불충분한 혼합성능은 연소실 내에서의 불균일한 화염구조를 형성한다. 따라서 본 연구에서는 JICF 분사시스템의 램제트 연소기에서 연료와 공기의 부족한 혼합성능에 기인한 연소의 불균일한 화염구조를 실험적으로 확인하고, 연료 제트의 침투깊이, 분열점 등을 예측하기 위한 상관관계식을 유도함으로서 JICF 분사시스템에서 연소성능에 영향을 미치는 액체제트와 주류공기와의 분무 및 혼합특성을 파악하였다. 특히, 액체 제트의 침투깊이를 주류공기의 유동방향의 상류와 하류로 나누어 상관관계식을 유도하여 좀더 정확한 침투깊이의 예측이 가능하도록 하였다.

• 한국항공우주학회지
• /
• 제33권1호
• /
• pp.48-53
• /
• 2005

본 연구의 목적은 기계적인 전단층 자극방법을 이용 스월제트 혼합향상의 가능성을 고찰함에 있다. 이를 위해 기계적 자극장치가 설계, 제작되었다. 주요 구성품으로는 두개의 아음속 노즐, 스월 발생기, 그리고 유동 자극기 등이다. 실험은 다음과 같은 다양한 헬리컬 모드들에서 수행되었다; m=+0, m=$\pm$1, m=$\pm$2, m=$\pm$3, m=$\pm$4. 열선유속계를 이용한 plane 파동과 헬리컬 파동 자극에 따른 제트속도 측정이 이루어 졌다. 다양한 헬리컬 모드에서의 결과 값들이 기준 값(plane-wave)과 비교되었다. 획득된 결과는 3-D mesh plot 과 2-D contour plot으로 표현되었다. 이로써 새로 고안된 장치는 헬리컬 불안정파 자극에 대한 효과를 입증하였고 또한 결과적으로 스월제트의 혼합을 증진시켰다.

• 한국수소및신에너지학회논문집
• /
• 제23권6호
• /
• pp.678-687
• /
• 2012

Concentration fields of solid powder in a liquid fuel were quantitatively measured by a visualization technique. The measurement system consists of a camcoder and three LCD monitors. The solid powder (glass powder) were filled in a head tank which was installed over a main mixing tank ($D{\times}H$, $310{\times}370mm$). The main mixing tank was filled with JetA1 fuel oil. With a sudden opening of the upper tank by pressurized nitrogen gas with 1.9 bar, the solid powder were poured into the JetA1 oil. An impeller type agitator was being rotated in the mixing with 700 rpm for the enhancements of mixing. Uniform visualization for the mixing flow field was made by the light from the three LCD monitors, and the visualized images were captured by the camcoder. The color images captured by the camcoder The color information of the captured images was decoded into three principle colors R, G, and B to get quantitattive relations between the concentrations of the solid powder and the colors. To get better fitting for the strong non-linearity between the concentration and the color, a neural network which has strong fitting performances was used. Analyses on the transient mixing of the solid powders were quantitatively made.

• 대한기계학회논문집B
• /
• 제28권5호
• /
• pp.569-579
• /
• 2004

The lift-off characteristics of lifted laminar propane jet flames highly diluted with nitrogen are investigated introducing acoustic forcing with a fuel tube resonance frequency. A flame stability curve is obtained according to forcing strength and the nozzle exit velocity for N2 diluted flames. Flame lift-off behavior is globally classified into three regimes; 1) a weakly varying partially premixed behavior caused by a collapsible mixing for large forcing strength, 2) a coexistent behavior of the edge flame and a weakly varying partially premixed behavior for moderate forcing strength, and 3) edge flame or triple flame behavior for small forcing. It is shown that the laminar lifted flame with forcing affects flame lift-off behavior considerably, and is also clarified that the flame characteristic of flame base is well described with the penetration depth of the degree of mixing, ${\gamma}$$\_$$\delta$/. It is also confirmed that the weakly varying partially premixed flame caused by a collapsible mixing fur large forcing strength behaves as that just near flame blow-out in turbulent lift-off flame.

• 대한기계학회논문집
• /
• 제14권5호
• /
• pp.1234-1243
• /
• 1990

본 연구에서는 선회가 없는 중심기류와 주위기류의 난류 전단층에서 형성되는 난류확산화염의 천이영역(transition region)에 주목하여 전단층내의 혼합작용과 화염 구조와의 상호작용을 규명하기 위해 거시적 및 순간적인 화염구조에 대해 실험적으로 조사 연구한 결과를 보고한다.

• 한국항공우주학회지
• /
• 제35권1호
• /
• pp.27-32
• /
• 2007

본 논문에서는 초음속 제트로부터 유발되는 소음의 특성을 실험적으로 분석하고, 기존의 소음예측식을 사용하여 비교해 봄으로서 예측식의 적용가능 범위를 살펴보았다. 실험을 위하여 제작된 초음속제트 발생장치의 출구마하수를 측정하기 위하여 정체실의 온도, 압력과 함께 피토 튜브를 이용하였고, 결과를 쉐도우 그래프 가시화 방법을 사용하여 얻은 결과와 비교하였다. 제트소음의 스펙트럼을 관찰한 결과, 불완전 팽창의 제트 유동에서 발생하는 충격파 관련 소음인 광대역 소음과 스크리치 톤 소음의 경향이 나타는 것을 확인 할 수 있었다. 아음속 조건에서는 큰 난류 구조에 의해 발생되는 난류 혼합 소음에 의하여 흐름방향으로 강한 방향성을 나타내었고, 초음속 조건에서는 충격파 관련 소음이 흐름의 상류 방향으로도 강하게 전파됨을 확인 하였다. 그리고 제트 엔진의 소음 예측 프로그램인 ARP876D 코드를 이용하여 실험에서 측정한 스펙트럼과 비교해 본 결과 아음속 영역에서보다는 초음속 영역에서 더 좋은 결과를 보였다.

• 대한기계학회논문집B
• /
• 제32권2호
• /
• pp.107-116
• /
• 2008

The jet pumps are widely used to transfer the fuel between the tanks in an aircraft fuel supply system. However detailed design procedures for determining the size of components of the jet pumps are not known so well. In this paper, the flow characteristics of the jet pump, which is applied in the fuel transfer system for the smart UAV (Unmanned Aerial Vehicle), were experimentally investigated using the acrylic jet pump model for the visualization of the internal flow. The pressure distributions within the jet pump were measured, and then the loss coefficients of each part were calculated. The effects of Reynolds number and the distances (S) between the exit of the primary nozzle and the mixing chamber entrance were investigated. In addition, cavitation phenomena were considered through the flow visualization inside the jet pump. As a conclusion from the experiment, the contraction shape of the primary nozzle has a strong effect on the loss coefficient of the nozzle and the cavitation occurrence. Cavitation starts around the nozzle exit, and then it propagates to the full flow fields of the jet pump.

• 대한기계학회논문집B
• /
• 제24권10호
• /
• pp.1399-1408
• /
• 2000

A 2-dimensional temperature field measurement technique using PLIF (Planar Laser Induced Fluorescence) was developed and it was applied to an axisymmetric buoyant jet. Rhodamine B was used as a fluorescent dye. Laser light sheet illuminated a two-dimensional cross section of the jet. The intensity variations of LIF signal from Rhodamine B molecules scattered by the laser light were captured with an optical filter and a CCD camera. The spatial variations of temperature field of buoyant jet were derived using the calibration data between the LIF signal and real temperature. The measured results show that the turbulent jet is more efficient in mixing compared to the transition and laminar jet flows. As the initial flow condition varies from laminar to turbulent flow, the entrainment from ambient fluid increases and temperature decay along the jet center axis becomes larger. In addition to the mean temperature field, the spatial distributions of temperature fluctuations were measured by the PLIF technique and the result shows the shear layer development from the jet nozzle exit.