• Title/Summary/Keyword: Jet Mass

Search Result 295, Processing Time 0.024 seconds

Effect of Different Volume of Microdrop Culture on B6D2F1 Mice Oogenesis (배양액 용량이 B6D2F1 마우스 배아발생능력에 미치는 영향)

  • Yoo, Chang-Seok;Park, Kee Sang;Seo, Byoung Boo
    • Journal of Embryo Transfer
    • /
    • v.31 no.1
    • /
    • pp.27-32
    • /
    • 2016
  • This study was conducted to evaluate the effects of different volume ($100{\mu}l$ vs. 2 ml) of microdrop culture on B6D2F1 mice oogenesis. In the present study, B6D2F1/CrljOri $F_1$ mice were utilized in order to maximize oogenesis. Also we used TCM-199, Dulbecco's medified Eagle's medium (DMEM), embryo culture medium (Fertilization medium, Cleavage medium, Blastocyst medium), G series medium and One step medium. Blastulation rate was not different between groups ($58.4{\pm}2.9%$ vs. $61.2{\pm}4.8%$). Zona hatched rate ($38{\pm}15.4%$ vs. $27{\pm}3.4%$) and attached rate ($55{\pm}13.9%$ vs. $46{\pm}3.9%$) did not differ by the volume of culture media. Total cell numbers ($59.8{\pm}9.7$ vs. $70.3{\pm}8.7$), ICM cell numbers ($15.8{\pm}0.6$ vs. $16.8{\pm}1.5$), TE cell numbers ($44.0{\pm}9.7$ vs. $53.6{\pm}7.3$), % ICM ($26.4{\pm}2.9%$ vs. $23.8{\pm}3.3%$) and ICM:TE ratio ($1:2.8{\pm}0.4$ vs. $1:3.2{\pm}0.6$) were not different between groups (i.e., $100{\mu}l$ vs. 2 ml). These results show that the capacity of the culture medium did not effect the cell numbers of B6D2F1 mice blastocysts. In summary, these results can provide fundamental data to maximize culture condition for in vitro fertilization on B6D2F1 mice.

Effects of Concentrate Supplementation on Reproductive Performances and Semen Quality of Indigenous Rams in Bangladesh

  • Azizunnesa, Azizunnesa;Zohara, Begum Fatema;Bari, Farida Yeasmin;Alam, Md. Golam Shahi
    • Journal of Embryo Transfer
    • /
    • v.28 no.4
    • /
    • pp.325-335
    • /
    • 2013
  • The study was set for one year to measure the effects of concentrate supplementation on reproductive performances and semen quality in indigenous rams. The study was conducted at the Department of Surgery and Obstetrics, Faculty of Veterinary Science, Bangladesh Agricultural University, Mymensingh, Bangladesh during the period from May 2011 to April 2012. Forteen ram lambs (4~5 months) were randomly divided into two equal groups (n=7); supplemented vs control. The animals of control group were maintained on natural grazing. Along with natural grazing the supplemented group was on supplemented feeding. The concentrate supplementation (Wheat bran, Crushed maize, Soy bean meal, Fish meal, DCP powder, Vitamin mineral premix, Salt) was provided @ 300 g/head /day to the supplemented group. Body weight, scrotal circumference, BCS and libido index were measured weekly. Age, body weight and scrotal circumference at puberty were recorded. Semen was collected once in a weak using artificial vagina and chilled at $5^{\circ}C$ for 48h for evaluation. Concentrate supplementation did not influence (p>0.05) body condition score, age, weight, scrotal circumference at puberty and libido index. Final body weight (kg), growth rate (g/d), scrotal circumference (cm) and scrotal growth rate (mm/15d) were significantly (p<0.05) higher in supplemented group of rams compared to control. Volume, concentration, motility and membrane potentiality of spermatozoa were varied significantly (p<0.05) in supplemented and control groups. However, density, mass motility, viability and sperm with normal acrosome, midpiece and tail were not differed insignificantly (p>0.05) in different observation times. It was concluded that concentrate supplementation with free grazing improved weight and scrotal circumference gain and semen production with increased quality in indigenous ram.

Effect of Alpha Lipoic Acid as an Antioxidant Supplement during In Vitro Maturation Medium on Bovine Embryonic Development

  • Hassan, Bahia M.S.;Fang, Xun;Roy, Pantu Kumar;Shin, Sang Tae;Cho, Jong Ki
    • Journal of Embryo Transfer
    • /
    • v.32 no.3
    • /
    • pp.123-130
    • /
    • 2017
  • This study was conducted to investigate the effects of alpha-lipoic acid (aLA) as an antioxidant that decrease the reactive oxygen species (ROS) in bovine embryonic development. Slaughterhouse derived bovine immature oocytes were collected and 4 different concentrations (0, 5, 10 and 20 mM) of aLA was supplemented in bovine in vitro maturation (IVM) medium. After 20 hrs of IVM, maturation rates, levels of ROS and glutathione (GSH), and further embryonic development after parthenogenetic activation (PA) and in vitro fertilization (IVF) was investigated according to aLA concentrations. Maturation rate was significantly higher in 10 mM group than other groups (80.5% vs. 62.9, 73.9, 64.2%; P<0.05). In the levels of ROS and GSH in matured oocytes as an indicator of oocyte quality, significantly better results were shown in 5 and 10 mM groups compared with other 2 groups. After IVM, significantly higher rates of blastocyst formation were shown in 10 mM groups in both of PA (27.9% vs. 18.8, 22.3, 14.2%; P<0.05) and IVF (32.6% vs. 23.9, 27.3, 16.2%; P<0.05) embryos. In addition, significantly more cell total cell number and higher inner cell mass ratio in 10 mM PA and IVP blastocysts showed developmental competence in 10 uM groups. Therefore, based on the entire data from this study, using $10{\mu}M$ of aLA confirmed to be the optimal concentration for bovine oocyte maturation and embryonic development.

Characteristic Study on Effect of the Vent Mixer to Supersonic Fuel-Air Mixing with Stereoscopic-PIV Method (3차원 PIV 기법을 사용한 벤트혼합기가 초음속 연료-공기 혼합에 미치는 특성 연구)

  • Kim, Chae-Hyoung;Jeung, In-Seuck;Choi, Byung-Il;Kouchi, Toshinori;Masuya, Goro
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.16 no.4
    • /
    • pp.50-56
    • /
    • 2012
  • Vent mixer can provide main flow directly into a recirculation region downstream of the mixer to enhance fuel-air mixing efficiency. Based on experimental results of three-dimensional velocity, vorticity and turbulent kinetic energy obtained by a stereoscopic PIV method, the performance of the vent mixer was compared with that of the step mixer which was used as a basic model. Thick shear layers of the vent mixer induced the increase of the penetration height. The turbulent kinetic energy mainly distributed along a boundary layer between the main flow and the jet plume. This turbulent field activates mass transfer in a mixing region, leading to the mixing enhancement.

KMT-2016-BLG-0212: FIRST KMTNET-ONLY DISCOVERY OF A SUBSTELLAR COMPANION

  • Hwang, K.H.;Kim, H.W.;Kim, D.J.;Gould, A.;Albrow, M.D.;Chung, S.J.;Han, C.;Jung, Y.K.;Ryu, Y.H.;Shin, I.G.;Shvartzvald, Y.;Yee, J.C.;Zang, W.;Zhu, W.;Cha, S.M.;Kim, S.L.;Lee, C.U.;Lee, D.J.;Lee, Y.;Park, B.G.;Pogge, R.W.
    • Journal of The Korean Astronomical Society
    • /
    • v.51 no.6
    • /
    • pp.197-206
    • /
    • 2018
  • We present the analysis of KMT-2016-BLG-0212, a low flux-variation ($I_{flux-var}{\sim}20mag$) microlensing event, which is in a high-cadence (${\Gamma}=4hr^{-1}$) field of the three-telescope Korea Microlensing Telescope Network (KMTNet) survey. The event shows a short anomaly that is incompletely covered due to the brief visibility intervals that characterize the early microlensing season when the anomaly occurred. We show that the data are consistent with two classes of solutions, characterized respectively by low-mass brown-dwarf (q = 0.037) and sub-Neptune (q < $10^{-4}$) companions. Future high-resolution imaging should easily distinguish between these solutions.

Water film covering characteristic on horizontal fuel rod under impinging cooling condition

  • Penghui Zhang;Bowei Wang;Ronghua Chen;G.H. Su;Wenxi Tian;Suizheng Qiu
    • Nuclear Engineering and Technology
    • /
    • v.54 no.11
    • /
    • pp.4329-4337
    • /
    • 2022
  • Jet impinging device is designed for decay heat removal on horizontal fuel rods in a low temperature heating reactor. An experimental system with a fuel rod simulator is established and experiments are performed to evaluate water film covering capacity, within 0.0287-0.0444 kg/ms mass flow rate, 0-164.1 kW/m2 heating flux and 13.8-91.4℃ feeding water temperature. An effective method to obtain the film coverage rate by infrared equipment is proposed. Water film flowing patterns are recoded and the film coverage rates at different circumference angles are measured. It is found the film coverage rate decreases with heating flux during single-phase convection, while increases after onset of nucleate boiling. Besides, film coverage rate is found affected by Marangoni effect and film accelerating effect, and surface wetting is significantly facilitated by bubble behavior. Based on the observed phenomenon and physical mechanism, dry-out depth and initial dry-out rate are proposed to evaluate film covering potential on a heating surface. A model to predict film coverage rate is proposed based on the data. The findings would have reliable guide and important implications for further evaluation and design of decay heat removal system of new reactors, and could be helpful for passive containment cooling research.

Study of hydrodynamics and iodine removal by self-priming venturi scrubber

  • Jawaria Ahad;Talha Rizwan ;Amjad Farooq ;Khalid Waheed ;Masroor Ahmad ;Kamran Rasheed Qureshi ;Waseem Siddique ;Naseem Irfan
    • Nuclear Engineering and Technology
    • /
    • v.55 no.1
    • /
    • pp.169-179
    • /
    • 2023
  • Filtered containment system is a passive safety system that controls the over-pressurization of containment in case of a design-based accidents by venting high pressure gaseous mixture, consisting of air, steam and radioactive particulate and gases like iodine, via a scrubbing system. An indigenous lab scale facility was developed for research on iodine removal by venturi scrubber by simulating the accidental scenario. A mixture of 0.2 % sodium thiosulphate and 0.5 % sodium hydroxide, was used in scrubbing column. A modified mathematical model was presented for iodine removal in venturi scrubber. Improvement in model was made by addition of important parameters like jet penetration length, bubble rise velocity and gas holdup which were not considered previously. Experiments were performed by varying hydrodynamic parameters like liquid level height and gas flow rates to see their effect on removal efficiency of iodine. Gas holdup was also measured for various liquid level heights and gas flowrates. Removal efficiency increased with increase in liquid level height and gas flowrate up to an optimum point beyond that efficiency was decreased. Experimental results of removal efficiency were compared with the predicted results, and they were found to be in good agreement. Maximum removal efficiency of 99.8% was obtained.

The Horizon Run 5 Cosmological Hydrodynamical Simulation: Probing Galaxy Formation from Kilo- to Giga-parsec Scales

  • Lee, Jaehyun;Shin, Jihey;Snaith, Owain N.;Kim, Yonghwi;Few, C. Gareth;Devriendt, Julien;Dubois, Yohan;Cox, Leah M.;Hong, Sungwook E.;Kwon, Oh-Kyoung;Park, Chan;Pichon, Christophe;Kim, Juhan;Gibson, Brad K.;Park, Changbom
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.45 no.1
    • /
    • pp.38.2-38.2
    • /
    • 2020
  • Horizon Run 5 (HR5) is a cosmological hydrodynamical simulation which captures the properties of the Universe on a Gpc scale while achieving a resolution of 1 kpc. This enormous dynamic range allows us to simultaneously capture the physics of the cosmic web on very large scales and account for the formation and evolution of dwarf galaxies on much smaller scales. Inside the simulation box. we zoom-in on a high-resolution cuboid region with a volume of 1049 × 114 × 114 Mpc3. The subgrid physics chosen to model galaxy formation includes radiative heating/cooling, reionization, star formation, supernova feedback, chemical evolution tracking the enrichment of oxygen and iron, the growth of supermassive black holes and feedback from active galactic nuclei (AGN) in the form of a dual jet-heating mode. For this simulation we implemented a hybrid MPI-OpenMP version of the RAMSES code, specifically targeted for modern many-core many thread parallel architectures. For the post-processing, we extended the Friends-of-Friend (FoF) algorithm and developed a new galaxy finder to analyse the large outputs of HR5. The simulation successfully reproduces many observations, such as the cosmic star formation history, connectivity of galaxy distribution and stellar mass functions. The simulation also indicates that hydrodynamical effects on small scales impact galaxy clustering up to very large scales near and beyond the baryonic acoustic oscillation (BAO) scale. Hence, caution should be taken when using that scale as a cosmic standard ruler: one needs to carefully understand the corresponding biases. The simulation is expected to be an invaluable asset for the interpretation of upcoming deep surveys of the Universe.

  • PDF

Cranioplasty with Custom-made Artificial Bone after Resection of Multilobular Bone Tumor in a Dog (개의 다엽성 골종양 제거후 커스텀 메이드 인공뼈를 이용한 두개골성형술)

  • Choi, Sungjin;Honnami, Muneki;Liu, I-Li;Yamamoto, Kenichi;Ohba, Shinsuke;Echigo, Ryosuke;Suzuki, Shigeki;Nishimura, Ryouhei;Chung, Ung-Il;Sasaki, Nobuo;Mochizuki, Manabu
    • Journal of Veterinary Clinics
    • /
    • v.31 no.1
    • /
    • pp.46-50
    • /
    • 2014
  • A 7-year-old spayed female Welsh corgi presented with a mass of the skull. The mass was diagnosed as multilobular bone tumor and surgically removed. To treat a large bone defect after the tumor removal, custom-made artificial bone fabricated by a 3-dimensional ink-jet printer was implanted in the defect. Follow-up computed tomography evaluation was performed for 4.3 years. The implant was well integrated with the skull and had covered the large bone defect during the follow-up period. Gradual degradation of the implant began 6 weeks after surgery. It provides an additional option for the treatment of large bone defect.

Expression Analysis of Programmed Cell Death Genes in Porcine Parthenogenesis (돼지 단위생식란의 세포사멸 유전자 발현 양상에 관한 연구)

  • Son, Jong-Yoon;Kim, Sang-Hwan;Jung, Duk-Won;Ryu, Chun-Yeol;Yoon, Jong-Taek
    • Journal of Embryo Transfer
    • /
    • v.30 no.3
    • /
    • pp.239-248
    • /
    • 2015
  • The nature of molecular mechanisms governing embryonic cell block is largely unknown, but recent reports have demonstrated that proper execution of programmed cell death is crucial for this process. The main objective of this study is to determine effects of programmed cell death on porcine oocytes development in vitro after parthenogenesis. Among the blastocysts matured in 3MA, MAP1LC3A and ATG5 RNA gene expression level increased in the order of Cyst < 3MA < RP. However, Casp-3 and TNF-r RNA gene expression level decreased in the order of RP < 3MA < Cyst. Expression of mTOR within the RP-cultured blastocyst was the most highly to the inner cell mass, while 3MA-cultured blastocyst showed very lowest expression in inner cell mass. The expression of mTOR showed a pattern opposite to that of MAP1LC3A. That is, its expression was the lowest in Cyst group. When the enzymatic activity of MMP-2 and MMP-9 was assessed in culture, the level of active MMP-9 was higher expression in the medium of each RP treatment group, with the level of another treatment group being relatively higher. Analyses of TIMP-2 and TIMP-3 revealed that their expression was higher in groups that did not receive RP treatment. More specifically, the level of TIMP-2 was not affected by Cyst treatment, while the level of TIMP-3 was higher in 3MA and RP treatment group. There was highly cell division activation efficiency of parthenogenesis on cultured system of RP supplement IVC medium. Therefore, these results suggest that embryo development was significantly increased in conditional culture medium with active autophagy as compared to common cultured condition. Further investigation of this distinction may enable the development of innovative improvements for the production of porcine somatic cell nuclear transfer.